- New
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
List of products by brand SparkFun - Strona 2
Loading...
Telescopic antenna ANT500 75MHz - 1GHz with SMA connector - SparkFun WRL-13002
Telescopic antenna with SMA connector receives a signal in the frequency band from 75 MHz to 1 GHz. The length can be adjusted from 20 cm to 88 cm.
Index: SPF-05579
Index: SPF-05579
Logic level transmitter TXB0104 bi-directional, 4-channel - SparkFun BOB-11771
The module allows to exchange the data between systems that use the most popular voltage levels: from 1.2 V to 3.6 V for VCCA inputs, and from 1.65 V to 5.5 V for VCCB inputs....
Index: SPF-04290
Index: SPF-04290
Thumb joystick stand - SparkFun BOB-09110
Stand in the form of PCB to facilitate connection of the joystick from the SparkFun.
Index: SPF-01635
Index: SPF-01635
Load Sensor Combinator (Ver. 1.1) - SparkFun BOB-13878
The module allows you to connect 4 load sensors - strain-gauge beams to one of the bridge via 4-wire cable. It finds application, for example, in the construction of the...
Index: SPF-07277
Index: SPF-07277
Bus Pirate v3.6a - SparkFun TOL-12942
The device allows you to connect the computer with electronic modules, using the popular data transfer protocols, e.g. SPI, I2C, UART. It improves the process of communication...
Index: SPF-01707
Index: SPF-01707
Connector for LED strips and strips JST-SM (4-pin) - SparkFun CAB-14576
Connector connecting RGB LED strips. The package contains a plug and socket JST-SM (4-pin) . Each end is plugged into 10 cm 20AWG cable.
Index: SPF-11126
Index: SPF-11126
Arcade Concave Button 3,5cm - white - SparkFun COM-09340
Dished button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10082
Index: SPF-10082
SX1509 - GPIO expander 16 I/O for Arduino - SparkFun BOB-13601
Expansion board with 16 GPIO pins together with I2C interface what means that to fully use all pins you only need to connect two wires to the microcontroller. SX1509 has also...
Index: SPF-11147
Index: SPF-11147
GSM antenna - quad-band - SMA - Sparkfun - CEL-00675
Quad antenna operating in the GSM band, it has a male SMA connector. It works in the frequencies ranging from 850 MHz to 1900 MHz. Length is 57.4 mm.
Index: SPF-11199
Index: SPF-11199
Heart rate monitor - SparkFun SEN-11574
Module for measuring the human heart rate, compatible with Arduino. It is working with the voltage from 3 V to 5 V, the output is the analog signal. The kit includes a probe...
Index: SPF-03063
Index: SPF-03063
Modular organizer - small - 10pcs - SparkFun TOL-11527
The set consists of 10 small containers with a transparent lid, measuring 30 x 25 x 22 mm, which can be joined together to form one larger organizer.
Index: SPF-11191
Index: SPF-11191
Thread Bobbin - 12m - SparkFun DEV-13814
Spool with the smooth conductive thread. The thread is made of stainless steel fiber and wound on a plastic reel. The thread has a resistance of 27 Ω per meter. Price...
Index: SPF-10102
Index: SPF-10102
Deflection sensor 73x6,3mm - SparkFun SEN-10264
During the bending, sensor increases its resistance. It can be used to detect hand movements, for example, crimping fists. Sensor length is 55 mm.
Index: SPF-01640
Index: SPF-01640
Haptic Motor Driver - DRV2605L - SparkFun ROB-14538
SparkFun module with DRV2605L haptic motor controller. It can handle ERM and LRA motors. Operates from 2 V to 5.2 V. Communicates over I2C bus.
Index: SPF-08219
Index: SPF-08219
Universal board small 420 holes - SparkFun PRT-12070
Universal board with layout compatible with the popular 420 holes breadboard. The module enables the transfer and soldering of the prototype system from the breadboard, while...
Index: SPF-02209
Index: SPF-02209
Weather station with measurement of the direction and speed of wind - SparkFun SLEEP-15901
A set of elements allowing you to construct your own weather station for home use. It consists of a wind speed and direction sensor and a precipitation sensor. In...
Index: SPF-16258
Index: SPF-16258
Serial Basic - USB-UART converter CH340G - microUSB socket - SparkFun DEV-14050
The converter based on the CH340 chip allows communication between USB and UART interfaces. It allows data exchange between a computer and a microcontroller board. It operates...
Index: SPF-08802
Index: SPF-08802
Two-channel optoisolator ILD213T - SparkFun BOB-09118
2-channel opto-isolator designed to control systems with voltages up to 70 V through the system of digital 3 - 5V, e.g., microcontrollers. The module protects the system of...
Index: SPF-01937
Index: SPF-01937
JST SH 4 PIN 20 cm cable + socket - SparkFun PRT-10359
4 - vein connecting cable ended on one side with connector of JST SH, on the other, with the removed insulation. Wire's length is approximately 20 cm, the kit also has a JST...
Index: SPF-02039
Index: SPF-02039
Adapter SOT23 to DIP 6-pin - SparkFun BOB-00717
Adapter enables the connection of the chips in SMD SOT-23 cases to threaded output holes of DIP. It also allows you to connect circuits to a breadboard or connect with wires.
Index: SPF-01760
Index: SPF-01760
Pogo Pin - pointed - SparkFun PRT-09174
Spring, with the pointed tip, pin, is intended for connection and testing the modules with the pins for the goldpin straps without the need of soldering.
Index: SPF-01753
Index: SPF-01753
Modular organizer - medium - 4pcs - SparkFun TOL-11528
The set consists of 4 medium sized containers with a transparent lid, measuring 75 x 30 x 22 mm, which can be joined together to form one larger organiser.
Index: SPF-11190
Index: SPF-11190
Thumb Slide Joystick - SparkFun COM-09426
The analog, resistive joystick , differs from the others in that it has a sliding feel .
Index: SPF-09862
Index: SPF-09862
Module with analog-digital multiplexer 74HC4051 - SparkFun BOB-13906
Module with 8-channel multiplexer CD74HC4051 allows you to connect up to 8 signals to a single analog output. The system can work as a demultiplexer and work with digital...
Index: SPF-07192
Index: SPF-07192