List of products by brand SparkFun - Strona 20
Light sensor - frequency converter TSL235R - SparkFun SEN-09768
Sensor processing the intensity of light with a length in the range of from 320 nm to 1050 nm on the measurable (for example, by the use of microcontroller) proportional...- EOL
VL53L1X time-of-flight - distance and ambient light sensor I2C (QWIIC) - SparkFun SEN-14722
Digital sensor, connecting the proximity measurement using the method of time-of-flight and the ability to measure the intensity of ambient light. The working range is up to...- EOL
USB cable Cerberus 3in1 1,8m - SparkFun CAB-12016
The cable has three end output: USB connector type B, connector microUSB B and miniUSB B. Built-in HUB USB allows you to connect three different devices at the same time....- EOL
MyoWare Muscle Sensor - a sensor for measuring EMG muscle activity - SparkFun SEN-13723
The sensor allows to control devices via bioelectrical signals generated by human muscles (EMG). The output is an analog signal that can be read using any microcontroller with...- EOL
Set of resistor CF THT 1/4W - 500pcs - SparkFun COM-10969
A set of 20 values of through hole resistors of 0,25 W with tolerance of 5 %, 25 pieces of each. The resistors are attached into a special package which makes it very easy to...- EOL
Teensy 3.2 ARM Cortex M4 - compatible with Arduino - SparkFun DEV-13736
The module has small size and great potential. It is equipped with a 32bit microcontroller with the core ARM Cortex M4 72 MHz, 256 KB of Flash, 64 KB of RAM. It has 34 pins of...- EOL
JST socket angled - SparkFun PRT-08612
2-pin connector, type JST - angular, for soldering into the PCB. It is used in small li-pol battery.- EOL
ICM-20948 9DoF - 3-axis accelometer, gyroscope and magnetometer I2C/SPI Qwiic - SparkFun SEN-15335
The SparkFun module is a combination of a 3-axis gyroscope, accelerometer and compass. It allows you to measure acceleration, magnetic field and angular velocity in...- EOL
SSOP adapter to DIP 20-pin - SparkFun BOB-00499
Adapter enables the connection of the chips in SMD SSOP20 cases to threaded output holes of DIP 20 pin. It also allows you to connect circuits to a breadboard or connect with...- EOL
- EOL
MOTORplate 15V / 1.2A - motor driver for Raspberry Pi - SparkFun DEV-14149
Board is suitable for GPIO connectors of Raspberry. It allows you to control four DC motors or two stepper motors with parameters of 15 V / 1.2 A.- EOL
Thing - Dev Board - Wi-Fi module ESP8266 - SparkFun WRL-13804
Wi-fi module, based on ESP8266. On board are goldpins soldered with board, 11 GPIO ports with support for I2C and SPI. An additional advantage is the built-in voltage...- EOL
Button board - 2x2 keyboard - SparkFun COM-09277
PCB for connection of buttons in 2x2 matrix. It also has a place to install the 1N4148 LEDs to isolate the switches and to facilitate decoding.- EOL
TinyFPGA AX2 - development board FPGA MatchXO2-1200 - SparkFun DEV-14828
Development board allows us to study the FPGA chips. The module is equipped with MatchXO2-1200 FPGA with 18 I/O, 64 KB RAM, 64 KB of Flash memory. The module has no built-in...- EOL
SparkFun Qwiic MPU-9250 9DoF IMU - accelerometer, gyroscope and magnetometer I2C
Module SparkX Qwiic GOING MPU-9250 is 9-axis inertial navigation unit (IMU). It has the gyroscope's, accelerometer's and magnetometer's function. You can use it for making...- EOL
XBee 802.15.4 + BLE Series 3 - U.Fl Antenna module - SparkFun WRL-15128
Xbee 3 this is the third edition of the worldwide popular module of wireless communication . Improved tested solutions will meet the expectations of the fans of the series.- EOL
Moduł XBee 802.15.4 + BLE Series 3 - RP-SMA Antenna - SparkFun WRL-15130
Popular XBee module for wireless communication with the installed RP-SMA slot that allows you to connect an external antenna to increase range.- EOL
Module XBee 802.15.4 1mW Series 1 - U.FL Connection - SparkFun WRL-08666
The module from the XBee Series 1 with a transmitter with the power of 1 mW with the u. FL connector for connecting the external antenna. It w orks in the area of wireless...- EOL
Arduino Fio module - SparkFun DEV-10116
The Arduino® module is based on Arduino® Atmega328P, compatible with software Funnel. It has 32 kB of Flash memory, 2 kB of RAM, 14 digital of I/os, 6 of which can be used as...- EOL
Pro Micro - 3.3V/8MHz - Atmega32u4 module - SparkFun DEV-12587
Module based on the Arduino Leonardo, is characterized by small size. It has the AVR Atmega32U4 microcontroller. It is equipped with 20 digital inputs/outputs, as well as...- EOL
Joystick Shield Kit - SparkFun DEV-09760
Module with a joystick and buttons connected directly to the ports on Arduino. It is supplied with2-axes lever and five buttons. The layout is designed for self-assembly,...- EOL
Pogo Pin - sharpened - SparkFun PRT-08870
The spring pin with a rigid head, designed for connecting and testing the modules with the pins on the goldpin straps without the need of soldering.- EOL
XBee Shield for Arduino - SparkFun WRL-12847
Shield makes it easy to create a wireless connection by using Arduino and XBee. It is w orking with modules Series 1, Series 2, standard and Pro. It has pins fixed to...- EOL
Sensor kit for Intel Edison - SparkFun Block
The set includes sensors that allow the platform Edison read, write and display information. The set includes 3 boards (blocks) connected to the Intel module, IMU, display and...- EOL