- New
- On sale!
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
Promotion
Loading...
Strip LED SMD2835 IP65 4,8W, 60 LED/m, 8mm, cold white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8W/m, density of 60 diodes per meter. The color of the light is cold white. Protection factor...
Index: LED-07092
Index: LED-07092
- Reduced price
- Promotion
SM-XD cable for Antclabs BLTouch sensor - 1,5m
Original 1,5m long cable for Antclabs BLTouch auto-leveling sensor, which is used in 3D printers. The cable on one side is terminated with a plug, which allows simple and...
Index: ANS-19958
Index: ANS-19958
- On sale!
- Promotion
Plastic case Kradex Z96JS ABS with gasket and sleeves IP67 - 70x50x37mm light-colored
2-part, airtight, universal case with a gasket for a PCB and brass sleeves. External dimensions 70 x 50 x 36,8 mm.
Index: KDX-09057
Index: KDX-09057
- On sale!
- Promotion
Plastic case Kradex Z128 ABS sealed with brass sleeves light-colored
2-part, airtight, universal case with a gasket for the electronic circuit and brass sleeves. External dimensions 105 x 70 x 40 mm.
Index: KDX-12842
Index: KDX-12842
- On sale!
- Promotion
ON-OFF switch monostable - PBW-16BPD - 2A 250V - flat green point
Monostable flat switch with the green point backlight. Contact load is 2 A for 250 V.
Index: AKS-10817
Index: AKS-10817
- Reduced price
- Promotion
In-Line wire connector Simet SCS2 B10 - 4mm 32A/450V - Ideal - 10pcs
The SCS2 quick connector is an excellent tool for extending cables. Its installation is extremely simple thanks to the plug-and-play system, which does not require the use...
Index: SIM-24729
Index: SIM-24729
- On sale!
- Promotion
Mounting Kit Four Pack - metal spacers 10mm for Raspberry Pi + screws + pads - 4pcs
Metal spacers with a length of 10 mm, designed for installation of an extension board for Raspberry Pi. Elements of this type are based on the screw, allow to keep space...
Index: ABE-11709
Index: ABE-11709
- On sale!
- Promotion
Monostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Monostable, flat switch with red point light. Contact load: 2 A for 250 V.
Index: AKS-10816
Index: AKS-10816
- Reduced price
- Promotion
Plastic case Kradex Z54J ABS with gasket and brass sleeves IP65 - 89x76x41mm light-colored
2-part, airtight, universal case with a gasket for s PCB and brass sleeves. External dimensions 89 x 75 x 41 mm.
Index: KDX-11214
Index: KDX-11214
- On sale!
- Promotion
HDMI Blow Premium Red Braided Cable Class 1.4 - 1,5m
HDMI allows you to connect audio and video devices, including the Rasbperry Pi, in accordance with the standard. The cable supports Full HD mode, its length is 1.5 meters.
Index: KAB-02080
Index: KAB-02080
- Reduced price
- Promotion
Case for Raspberry Pi 4B with camera mount - black
Self-assembly product from Gravlaser. Housing consists of six parts and assembly elements. It is designed for Raspberry Pi model 4B minicomputer. It is made of acrylic in...
Index: GRL-20449
Index: GRL-20449
- Reduced price
- Promotion
Double Hanging Pulley - 10x15mm - 2pcs.
Double, pendant, metal pulley with the width of 10 mm and a diameter of 15 mm. The Wheel can rotate 360 °. Dimensions of the whole: 56 x 34 x 21 mm.
Index: GRL-12571
Index: GRL-12571
- On sale!
- Promotion
Expansion Kit - extension Raspberry Pi to breadboard + tape + breadboard - Iduino RA028
A module that allows the GPIO Raspberry Pi pins to be led out onto the contact plate using IDC tape. The kit also includes a contact plate and 40-pin tape.
Index: OST-14267
Index: OST-14267
- Reduced price
- Promotion
Bluetooth 4.0 BLE module - HM-10 / AT-09 - MLT-BT05 - 3.3V / 5V
Bluetooth v4.0 module. It works with voltage from 3.6 V to 6 V, it communicates over a serial UART interface (RX, TX pins), it supports the AT command. Maximum transmitter...
Index: MOD-09515
Index: MOD-09515
- Reduced price
- Promotion
mCookie OLED - OLED 128x64px display - MicroDuino MCBS11
Universal module in mCookie standard, which acts as a small graphic display. The product is compatible with the Itty Bitty Buggy robot, which is connected to it via a magnetic...
Index: MIC-15491
Index: MIC-15491
- On sale!
- Promotion
Micro motor N20-BT18 5:1 250RPM - 9V
The N20 series miniature motor with 5:1 gearing, has 250 RPM , torque is 0.5 kg*cm (0.049 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12560
Index: DNG-12560
- Reduced price
- Promotion
LED Sequins - LED diodes - Rose Pink - 5pcs - Adafruit 1792
A set of 5 miniature modules with LED diodes that can be used as unique glowing decorations, e.g. on clothes or everyday objects. Each module requires connection to a power...
Index: ADA-23544
Index: ADA-23544
- Reduced price
- Promotion
Micro motor N20-BT12 10:1 1300RPM - 9V
The N20 series miniature motor with 10:1 gearing, has 1300 RPM , torque is 0.14 kg*cm (0.014 Nm). The supply voltage is from 3V to 9V .
Index: DNG-12551
Index: DNG-12551
- Reduced price
- Promotion
Heater - for soldering station ATTEN ST-8802
Manufactured by ATTEN, original spare part for the ST-8802 soldering station. The heater is a key element in the construction of the tip soldering iron. Enables quick heating...
Index: ATT-19415
Index: ATT-19415
- On sale!
- Promotion
Module with USB A and USB type C sockets - SB Components 25756
The module is equipped with USB Type A and USB Type C female connectors with 2.54 mm pitch solder pads. It allows for easy prototyping of devices with a USB interface,...
Index: SBC-22966
Index: SBC-22966
- On sale!
- Promotion
Pico Zero Expansion - prototyping board for Raspberry Pi Pico - SB Components SKU21505
The Pico Zero Expansion features pinouts for soldering a goldpin socket and plugging in the Raspberry Pi Pico , one row of 6 x 20 prototyping fields, and two rows of 8 x 20...
Index: SBC-20398
Index: SBC-20398
- On sale!
- Promotion
Plastic case Kradex ZP75.75.45UJ TM ABS - 75x75x45mm - light gray
Two-piece, universal housing by Kradex in gray. It is made of ABS material and its external dimensions are 75 x 75 x 45 mm. The upper and lower parts are connected using brass...
Index: KDX-23055
Index: KDX-23055
- On sale!
- Promotion
Module with TRRS 3.5mm Jack - SB Components 27637
The SB Components module is a practical tool that makes it easier to connect audio devices via a standard 3.5 mm jack socket and TRRS cables. Provides convenient access to...
Index: SBC-23848
Index: SBC-23848
- On sale!
- Promotion
justPi power supply for Raspberry Pi 3B+/3B/2B/Zero - microUSB 5V/2,5A
A power supply equipped with a microUSB connector compatible with the Raspberry Pi mini-computer. It has parameters allowing for optimal power supply to the Raspberry Pi 3B+ /...
Index: ZAS-07363
Index: ZAS-07363
- Reduced price
- Promotion