- New
Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
Brushless 50 Nm drill driver with tool kit in a case - HOTO 16V Brushless Drill Tool Kit HTE0035GL
HOTO 16V Brushless Drill Tool Kit: a case kit with a 50 Nm brushless drill driver (display, automatic mode) and hand tools.
- Two gears: up to 400 and up to 1700 rpm, 32+1 torque levels, chuck up to 10 mm
- Hammer, adjustable wrench, pliers, 3 m tape measure, screwdriver, 8 drill bits and 10 bits
- 1900 mAh battery charged over USB-C (cable included, no power adapter)
We could not load the price.
The promotional price does not combine with quantity discounts.
50 Nm drill driver and tools in one case
HOTO 16V Brushless Drill Tool Kit is a home repair kit in one case. It combines a brushless drill driver with a display and five hand tools. The drill delivers up to 50 Nm of torque and has two gears: up to 400 rpm for driving screws and up to 1700 rpm for drilling.
Next to it in the case you will find a hammer, an adjustable wrench, pliers, a tape measure and a screwdriver with bits, plus 7 drill bits and 10 bits. The whole kit weighs 3.4 kg. You charge the 1900 mAh battery over USB-C from any 5 V, 9 V or 12 V power adapter.
HOTO kit: drill driver, hand tools and accessories in a case
50 Nm
maximum torque (442 lb·in)
1700
rpm in the drilling gear, up to 400 rpm for driving
32+1
torque levels and an Auto mode that stops driving by itself
25
pieces: drill, 5 tools, 8 drill bits, 10 bits, cable
The display shows the torque level (1-32), battery status and Auto or manual mode
Drill with a display and Auto mode
The display shows the torque level, battery status and operating mode. With the Mode button you switch between manual torque setting and Auto mode, in which the drill stops by itself when the screw is tight. The manufacturer recommends this mode for driving screws into hard materials and does not recommend it for drilling.
- Two gears: up to 400 rpm (driving) and up to 1700 rpm (drilling)
- Trigger sensitive to pressure: the harder you press it, the faster the bit turns
- Keyless chuck up to 10 mm: you tighten the bit by hand
- Direction switch: clockwise, counterclockwise and trigger lock
- LED light illuminates the work area
What is in the case besides the drill
The hand tools have their own slots in the case with latches on both sides. The kit is enough for assembling furniture, hanging a shelf and small repairs.
- Claw hammer with a claw for pulling nails and a rubber cover that protects the surface
- Adjustable wrench 200 mm for hex bolts and nuts up to 20 mm
- Half-round pliers with a spring and grooves for crimping terminals and stripping insulation
- Tape measure 3 m with an automatic tape lock
- Multifunction screwdriver with a magnetic socket for 1/4 inch (C6.3) bits
- Accessories: 7 drill bits, a multifunction drill bit and 10 bits of 2 inches (50 mm)
Tools from the kit at work: drill, hammer, tape measure, screwdriver, wrench and pliers
Case 268 x 269 x 91 mm, 3.4 kg with contents
Power and charging over USB-C
The drill has a built-in 1900 mAh lithium-ion battery with a nominal voltage of 14.4 V. You charge it through the USB-C port from a 5 V, 9 V or 12 V (2 A) power adapter; from a 12 V 2 A adapter a full charge takes about 120 minutes. The manufacturer lists only a cable in the kit, so you choose the power adapter yourself.
When the battery is discharged, the display shows code E1, and when the battery temperature is too low or too high, code E3. The battery is permanently built in and you cannot replace it yourself.
Is it the right choice for you?
A good choice if:
- You are putting together a first kit for an apartment and want a drill and basic tools in one box
- You assemble furniture and hang shelves: 50 Nm and Auto mode are enough for screws in wood and plasterboard
- You want to charge the drill over USB-C from a power adapter you already have
- You want your tools in one lockable case with a minimalist look
Consider another option if:
- You already have hand tools and only need a drill: choose HOTO 16V Brushless Drill
- You need swappable batteries for all-day work: this model has a permanently built-in battery
Kit with tools and the drill alone
| HOTO 16V Brushless Drill Tool Kit | HOTO 16V Brushless Drill | |
|---|---|---|
| Drill driver 50 Nm, 32+1 torque levels, 1900 mAh | yes | yes |
| Hammer, adjustable wrench, pliers, 3 m tape measure | included | none |
| Multifunction screwdriver with a magnetic socket | included | none |
| Drill bits and 2 inch bits | 7 drill bits + multifunction, 10 bits | 5 drill bits, 10 bits, extension |
| Packaging | case with latches, 268 x 269 x 91 mm | bag |
| Kit weight | 3.4 kg | approx. 1 kg |
| See | this page | HOTO 16V Brushless Drill |
Contents based on the manufacturer's lists (hototools.com) and the HOTO 16V Brushless Drill product page at Botland.
Did you know
Why 16 V, when the specification says 14.4 V?
Both voltages refer to the same battery. 16 V is the voltage of a lithium-ion pack right after charging, and 14.4 V is the nominal voltage at which the pack works for most of its cycle. Power tool makers usually name their tools after the higher number and give the lower one in the specification.
Source: HOTO 16V Brushless Drill Tool Kit manual (specification)
Frequently asked questions
Is a charger included in the kit?
No, the manufacturer lists only a USB-C cable in the kit. You charge the drill from a 5 V, 9 V or 12 V (2 A) USB-C power adapter; from a 12 V 2 A adapter a full charge takes about 120 minutes.
Is the drill suitable for concrete?
It is a drill driver without a hammer function, designed for plasterboard, wood, metal and plastics. For concrete you need a hammer drill.
How does Auto mode work?
After you press the Mode button, the drill detects by itself when the screw is tight and stops. The manufacturer recommends this mode for driving into hard materials, and recommends manual mode for drilling.
Which bits and drill bits fit the drill?
The keyless chuck accepts drill bits and bits with a diameter of up to 10 mm. The hand screwdriver from the kit has a socket for 1/4 inch (C6.3) bits, the same as the 10 bits in the case.
Can I replace the battery?
No, the 1900 mAh battery is permanently built in. The manual forbids opening the pack and servicing it yourself.
Kit contents
- 1 x HOTO 16V Brushless Drill drill driver
- 1 x Multifunction screwdriver with a magnetic socket
- 1 x 3 m tape measure with a lock
- 1 x Claw hammer with a rubber cover
- 1 x Adjustable wrench 200 mm
- 1 x Half-round pliers
- 1 x Multifunction drill bit
- 7 x Drill bits
- 10 x Bits 2 inches (50 mm), 1/4 inch
- 1 x USB-C charging cable
- 1 x Case with latches
A USB-C power adapter is not included in the kit.
Specification
| Parameter | Value |
|---|---|
| Manufacturer | HOTO |
| Manufacturer code | HTE0035GL (model QWDZGJ003) |
| Type | cordless brushless drill driver with a hand tool kit |
| Maximum torque | 50 Nm (442 lb·in) |
| Torque levels | 32 + Auto mode |
| No-load speed | gear 1: 0 to 400 rpm; gear 2: 0 to 1700 rpm |
| Chuck | keyless, up to 10 mm |
| Battery | lithium-ion, 14.4 V, 1900 mAh, built in |
| Charging | USB-C, 5 V / 9 V / 12 V, 2 A; approx. 120 min from a 12 V 2 A adapter |
| Display | torque level, battery status, operating mode |
| Lighting | LED |
| Operating temperature | -10 °C to 45 °C |
| Charging temperature | 5 °C to 40 °C |
| Noise (EN 62841) | sound pressure 79 dB(A), sound power 85 dB(A) |
| Vibration (EN 62841) | 1.5 m/s² |
| Adjustable wrench | 200 mm, nuts up to 20 mm |
| Tape measure | 3 m, automatic lock |
| Bits | 10 pcs, 2 inches (50 mm), 1/4 inch (C6.3) |
| Case dimensions | 268 x 269 x 91 mm |
| Kit weight | 3.4 kg |
Useful links
| Name | Value |
|---|---|
| Width | 27.5 cm |
| Height | 27.5 cm |
| Depth | 10 cm |
| Weight | 3.5 kg |
GLS
Shipping in 24 hours
from €13.28
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
Products from the same category
See all
