- New
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Sale
- Sale
- Sale
- Sale
- Sale
- Sale
ELECTRONICS - Strona 34
Loading...
Lanberg Ethernet Patchcord UTP 5e 0,25m - blue
Patchcord with a length of 0.25 m in blue color. Cable - twisted pair in category 5e Ethernet with RJ45 connectors installed. It has a cover that protects it from breaking.
Index: IMP-14366
Index: IMP-14366
Lanberg USB Cable Type A-C 2.0 black - 1m
The USB 2.0 Type A - C cable, Lanberg black, allows you to synchronize data and charge devices with a USB 2.0 Type C input (up to 3 A / 36 W). The cable length is 1 m.
Index: IMP-14817
Index: IMP-14817
Lanberg USB Cable Type A - C 3.1 black - 1,8m
USB cable A - C 3.1 from Lanberg in black. It has USB plugs type A and type C. It is used for data transmission, as well as for charging devices with USB type C input. These...
Index: IMP-14828
Index: IMP-14828
Camera Raspberry Pi HQ IMX477R 12,3 MPx for Raspberry Pi
High quality camera for Raspberry Pi with higher resolution and frequency than the official Raspberry Pi v2. It has been designed to work with various C- and CS-mount lenses ....
Index: RPI-16332
Index: RPI-16332
Speaker 5W 8Ω - 100x45x21mm - 2pcs. - Waveshare 14595
The 5 Watt 8 ohm resistance speaker works with selected Waveshare screens. The set includes two loudspeakers with external dimensions of 100 x 45 x 21 mm.
Index: WSR-16399
Index: WSR-16399
Kanthal A1 resistance wire 0,40mm 12Ω/m - 30,5m
High quality resistance wire made of aluminium, chromium and iron alloy. It is characterized by resistance to high temperatures. It has a diameter of 0,40 mm and a length...
Index: AKS-16664
Index: AKS-16664
Connecting cables female-female justPi 20cm - 40pcs.
The set contains 40 pieces of connection cables in different colours. They are terminated on both sides with a female connector . The wires can be separated into individual...
Index: JUS-19620
Index: JUS-19620
Index: UCC-00093
Ceramic condenser 330pF/50V THT - 10pcs
Through hole ceramic capacitor of 330 PF / 50 V. Price for 10 pieces.
Index: PAS-03589
Index: PAS-03589
Test stand type ZIF for chips with 40 pins. It has a lever, thanks to which the multi-pin socket is crimped. The stand is equipped with gold-plated contacts. The raster between...
Index: UCC-04738
Index: UCC-04738
ArduCam OV5647 5Mpx camera for Raspberry Pi compatible with the original version
Camera module with OV5647 sensor connected to dedicated connector of Raspberry Pi minicomputer versions A, B, B+,2, 3, 3B+, 4B. The device has a 5 Mpx sensor and supports HD...
Index: ACM-06850
Index: ACM-06850
Simple DC 28V/3A motor driver - module with knob
Extremely easy to use, single-channel direct current motor controller with speed control knob. The device works on the basis of PWM signal. Power supply voltage is from 8 V to...
Index: MOD-06906
Index: MOD-06906
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08071
Index: MOD-08071
A set of 200 resistors with the 1 W power. Elements are in the through hole THT case.
Index: PAS-08285
Index: PAS-08285
- Reduced price
- SPECIAL OFFERS
LED indicator 230V AC - 8mm - blue
LED light, operating voltage 230 V AC. It has a diameter of 10 mm.
Index: LED-08990
Index: LED-08990
- Sale
- SPECIAL OFFERS
ON-OFF switch monostable - PBW-12B - 2A 250V
Projecting monostable switch with contact rating of 2 A for 250 V.
Index: NSZ-09794
Index: NSZ-09794
Breadboard is used for creating and testing electronic circuits in color blue.
Index: AKS-10288
Index: AKS-10288
Relay module 4 channels + Bluetooth 4.0 BLE - 10A / 250V contacts - 5V coil
The module has four SRD-05 relays with a coil powered with the voltage of 5 V, it was also equipped with a module Bluetooth 4.0 BLE allowing ot control the devices via Android...
Index: GRL-10909
Index: GRL-10909
- Sale
- SPECIAL OFFERS
DFRobot Gravity - 2x16 I2C LCD display - black with RGB backlight
LCD display 2x16 characters with black backlight, it can display the font in any colour from the RGB palette. Communicates with two-wire I2C bus. The kit includes a cable...
Index: DFR-12360
Index: DFR-12360
OLED display, blue graphic, 0.96 '' 128x64px I2C - red
OLED white display with a diagonal of 0.96" and a resolution of 128 x 64 px. The screen is based on SH1106 driver, works with voltages of 3.3 V and 5 V, and communicates over...
Index: GRL-14011
Index: GRL-14011
The memory card Kingston Canvas Select Plus microSDXC 64 GB: 100 MB/s, UHS-I class 10 with adapter
High-performance micro SD/SDXC memory card, used in modern smartphones, cameras or tablets. It offers a read speed up to 100 MB/sec . Class 10 product with UHS-I...
Index: BAL-16205
Index: BAL-16205
Flexible Qwiic Cable with 4-pin plug - 10cm - SparkFun PRT-17259
Qwiic ecosystem cable with 4 wires placed in JST connector with 1 mm pitch, cable length is 10 cm . It has been designed for simple interconnection of devices equipped...
Index: SPF-19154
Index: SPF-19154
JustPi THT CF carbon resistor 1/4W 1Ω - 30pcs.
The set consists of 30 resistors. The electronic elements are designed for THT through-hole mounting. The resistance is 1 Ohm and the tolerance is 5%.
Index: JUS-19998
Index: JUS-19998
Sony IMX519 16 Mpx camera - with autofocus - for Raspberry Pi and Nvidia Jetson Nano - ArduCam B0371
The ArduCam camera is equipped with a Sony IMX519 sensor with a 16 Mpx matrix. The module has an autofocus lens and a high image resolution of 4656 x 3496 px. The focusing...
Index: ACM-21104
Index: ACM-21104