- New
- New
- Sale
- Sale
- Sale
- Sale
ELECTRONICS - Strona 57
Loading...
WiFi antenna with connector w.FL / MHF3 / IPEX3 - Adafruit 5445
Manufactured by Adafruit WiFi and Bluetooth antenna operating in the frequency band from 2400 MHz to 2700 MHz . On the one hand, it is terminated with an MHF3 / IPEX3...
Index: ADA-22477
Index: ADA-22477
Lamp with motion sensor 2700K - black - 60cm - Yeelight
Yeelight lamp with a warm, gentle color for the eyes . The built-in wide-range intelligent motion sensor turns on the lamp when it detects your presence. The battery...
Index: INN-22701
Index: INN-22701
W6100-EVB-Pico - RP2040 microcontroller and Ethernet board - WIZnet
Board manufactured by WIZnet and equipped with a Raspberry Pi RP2040 microcontroller and an Ethernet TCP/IP W6100 system. W6100-EVB-PICO supports wired Internet protocols such...
Index: WIZ-22857
Index: WIZ-22857
Female adapter SMA - U.FL - 15cm - SparkFun WRL-18568
Antenna adapter from SparkFun with a 15 cm cable. It has a gold-plated SMA female connector on one side and a U.FL connector on the other. The adapter is used wherever there...
Index: SPF-23159
Index: SPF-23159
USB - RS232/RS485/UART(TTL) converter - FT232RL - Waveshare 15817
Converter enabling communication between the USB interface and RS232, RS485 or UART (TTL) . It is based on the FT232RL system, ensuring reliable and fast operation. Equipped...
Index: SEE-24125
Index: SEE-24125
Index: UCC-00091
DIP switch 5-pole - red - 5psc.
Slide switch, board with five levers. Leads Raster: 2.54 mm Housing height: 5.5 mm
Index: SWT-00371
Index: SWT-00371
Linear voltage regulator LDO 5V LM1117T-5.0 - THT TO220
Low-Dropout linear stabilizer. Output voltage: 5 V. Maximum output current: 1.5 A. TO220 housing.
Index: UCC-00791
Index: UCC-00791
QTR-1A reflectance sensor - 2pcs. - Pololu 2458
Two modules with QTR reflective sensors. They have an analog output. The supply voltage is 5 V.
Index: PLL-01842
Index: PLL-01842
PCF8591 - A/D and D/A converter, 8-bit I2C v2
Module with A/D converter - 4 channels and D/A - 1 output. It works with voltage from 2.5 V to 6.0 V, and communicates over I2C. The board also contains: potentiometer,...
Index: MOD-02632
Index: MOD-02632
Cable IDC 40 pin female-female 40 cm Raspberry Pi 4B/3B+/3B/2B
40 cm long female cable terminated with 40-pin IDC raster 2.54 mm (goldpin standard) connectors, matching Raspberry Pi 4B / 3B+ / 3B / 2B.
Index: KAB-02924
Index: KAB-02924
MCP3424 - ADC 18-bit 4-channel I2C converter
Module with analog-digital converter, delta-sigma type with 18-bit precision. It is equipped with four channels with differential inputs. It works at speed of up to 240 samples...
Index: DFR-03036
Index: DFR-03036
Alcohol sensor MQ-3 - semiconductor - blue module
Module with the alcohol sensor MQ-3 with the goldpin pins, pitch of 2.54 mm. It is powered with the voltage of 5 V. It has digital and analog output, making it compatible with...
Index: MOD-03736
Index: MOD-03736
Grove - set of 5 female-female 4-pin - 2mm/30cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. Cable length is 30 cm. Version with a latch.
Index: SEE-04398
Index: SEE-04398
Capactive touchscreen Waveshare 7 " for Raspberry Pi with a resolution of 1024 x 600 px. Works with Raspberry Pi in versions 4B, 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero and Zero W...
Index: WSR-04688
Index: WSR-04688
NTC 110 10kΩ thermistor 5% - 10pcs.
The NTC 110 thermistor with a resistance of 10 KΩ and a tolerance of 5 %.
Index: SES-04949
Index: SES-04949
DFRobot Gravity - analogue turbidity sensor
Sensor for testing the quality of water by measuring its turbidity. Operates at 5 volts at temperatures from -30°C to 80°C.
Index: DFR-05318
Index: DFR-05318
Plastic case Kradex Z76 - 109x59x28mm black
Two-piece, universal electronic housing. External dimensions are 109 x 59,5 x 28 mm.
Index: KDX-06188
Index: KDX-06188
SMA female connector for angular printing - 50Ω
SMA angled female connector with an impedance of 50 Ω mounted on the PCB. Used to connect antennas and receivers.
Index: KAB-06317
Index: KAB-06317
Mono 2.5W Class D Audio Amplifier - PAM8302 - Adafruit 2130
The module with class D audio amplifier. It is characterized by low power losses. It allows to connect a 4-8 ohm speaker of 2.5 W power. It has a built-in potentiometer for...
Index: ADA-06381
Index: ADA-06381
The 5-pin plug for printing, the pitch is 2.54 mm. The set includes 5 x 5-pin plugs.
Index: KAB-06773
Index: KAB-06773
Strip LED SMD5050 IP65 14,4W, 60 LED/m, 10mm, RGB - 5m
RGB LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. Protection factor IP65. Price for a package,...
Index: LED-07076
Index: LED-07076
Romi - Magnetic Encoders set for Romi Chassis - 2 pieces - Pololu 3542
A pair of magnetic quadrature sensors, designed for mounting on Romi Chassis. Consists of a plate with the Hall sensor and the plastic rotor with magnets, a set of makes up...
Index: PLL-07350
Index: PLL-07350
High temperatura probe PT100 - 7x200mm
Waterproof analogue sensor with the high temperature working in the range from -200°C to 420°C. The output is resistance dependent on temperature. Probe length is 200 mm.
Index: SES-07467
Index: SES-07467