Grove modules - Strona 7
BitMaker V2 - expansion board for BBC micro:bit - Seeedstudio 114992653
The BitMaker V2 expansion board for BBC micro: bit is equipped with Grove connectors that allow for trouble-free connection of modules with the same interface. On the board...BitPlayer - game controller, expanision for BBC micro:bit
BitPlayer extension for the BBC micro:bit to create your own wireless gaming controller. The board works on the Plug & Play principle and features a 2-axis joystick , 6...Grove2USB-C - connector Grove to USB C - 5pcs - M5Stack A140
An adapter that allows you to easily connect the I/O pins of sensors and modules based on Grove technology to the D+ and D- pins supported by USB C. The set includes 5...Grove - L298P - two-channel motor driver 12V/2A - Seeedstudio 105020093
A module with an L298P motor controller that supports two DC motors or one stepper motor. The voltage supported by the controller is between 6 V and 12 V and the continuous...Grove - L298N - two-channel motor controller 15V / 1A
Grove series module equipped with a two-channel H-bridge L298N , controlled by ATmege 8L. The circuit allows to regulate the direction of rotation of motors with maximum...- Reduced price
- Promotion
Grove - dust / purity air sensor PM2.5 PPD42NS - 5V PWM
Sensor of dust allows you to monitor the purity of the air. It is equipped with a sensor that can detect PM 2.5 particles with a diameter above 1 ΞΌm, such as cigarette smoke....Grove - HP206C Pressure sensor I2C
High quality Grove pressure sensor, equipped with HP206C. It has a wide measuring range from 300 hPa to 1200 hPa. It is fully compatible with Arduino, it is connected to it via...Grove - 3 Axis Digital Accelerometer 16g Ultra - Low Power (BMA400)
Grove module 3-axis Β±16 g low power digital accelerometer. It is a 12-bit digital three-axis sensor that detects acceleration and movement. Based on a BMA400 chip. Powered by...Grove - module with LED RGB WS2813 diode - Seeedstudio 104020169
The module is equipped with RGB LED with WS2813 chip. It works with a voltage of 3.3 V and 5 V . The use of Grove connector makes it much easier to connect the module to...Joystick V1.1 MEGA8A - expansion Unit for M5Stack development modules
Joystick V1.1 MEGA8A in the form of a Unit extension for use with M5Stack development modules. The controller has the form of an analog knob similar to those used, among...Grove - Lightning Sensor - AS3935 - Seeedstudio 101021072
The Grove AS3935 sensor is an advanced, easy-to-use sensor that can detect both cloud-to-ground and intra-cloud lightning , up to a 40 km radius. It communicates via the...Grove - module with Bluetooth 3.0 with EDR
Module from the Grove series, allowing to connect via Blootooth v3.0 + EDR, class 2. It works with a voltage of 5 V, it communicates through the Grove standard slot, it...- Reduced price
- Promotion
Grove - Doppler Radar - BGT24LTR11 - 24GHz transceiver - 10m - Seeedstudio 109020021
Doppler radar based on BGT24LTR11 chip and XMC1302 controller with ARM Cortex-M0 processor. It allows for precise distance measurements and motion detection using radar...Grove Starter Kit for Seeed Xiao - Seeedstudio 110010044
Grove Starter Kit for Seeed Xiao is a set of Grove modules with an overlay designed to work with the Seeed Xiao module. The manufacturer has also prepared a series of guides...- Reduced price
- Promotion
Grove - ORP Sensor Kit Pro - liquid quality test kit - ORP IP68 - Seeedstudio 110020370
The set is equipped with a Grove sensor that measures the ORP (HR-O) to detect the quality of the liquid by measuring the purity of the water and determining its ability to...FeatherWing - 6 port Grove + STEMMA QT expansion module for Feather boards - Adafruit 5862
FeatherWing from Adafruit is an expansion module for Feather boards , allowing you to connect up to 6 devices with a Grove connector . Equipped with 3 analog / digital...Grove - StarterKit v3 - IoT starter package for Arduino
Starter set introducing the world of IoT (Internet of Things) for Arduino boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others....Arduino MKR Connector Carrier ASX00007 - shield for Arduino MKR
Module for Arduino from the MKR that extends the capabilities of I/O pins. It is designed for modules and sensors from the Grove series. It has 4-pin connectors, works with...Grove - 4-pin screw connection
Module from the Grove series with a 4-pin screw connection of 3.5 mm. It is designed to connect the cables with diameter from 0.2 mm to 0.8 mm for the microcontroller. It has...Grove - a set of 2 female-female 4-pin - 50cm
A set of two 4-pin Grove cables , 50 cm long . M odel dedicated to the M5Stack series , which allows to combine developer modules with Unit modules. The...Grove - 10kΞ© linear rotary potentiometer - top connector
Potentiometer 10 kOhm with linear rotary. It as a 300Β° range of rotation. It h as a 4-pin Grove connector on the side of the handle.Grove - precipitation / water sensor
The Grove sensor used to detect the presence of water or its quantity. It is powered with the voltage of 5 V. It can be used to detect the presence, level or absence of water.See also
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Gravity modules