Description: Fiberlogy ABS Plus 1,75 mm 0,85 kg - Gray
Filament made ofABSPlus material, designed for3D printers. The product has a mass of0,85 kg, is wound on a spool and vacuum packed with moisture absorber. The recommended printing temperature is between 250°C and 270°C. The diameter of the filament is1,75 mm. ABS filament can be used for printing handles, containers, covers, cases, etc. The material is characterized by high strength. The colour of the filament is grey. ABS Plus is recommended to print in closed chamber. The spool on which the filament is wound is in two different versions sent randomly.
In our offer of filaments you will also find other materials and colors.
Properties of the felt
- Increased strength
- Resistance to high temperatures and scratches
- Possibility of mechanical and chemical processing
- High resistance to cracking under load
Suggested parameters for printing with felt
Printing temperature | From 250°C to 270°C |
Table temperature | 90°C to 110°C |
Closed chamber | Recommended |
Due to differences in printer construction, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Graph of physical properties of ABS Plus felt.
Technical specification and physical properties of the felt
Parameter | Range |
---|---|
Felt diameter | 1,75 mm |
Dimensional tolerance of the filament | +/- 0.02 mm |
Colour | Grey |
Printing temperature | From 250°C to 270°C |
Table temperature | From 90°C to 110°C |
Density | 1.1 g/cm3 |
Printing speed | From 35 to 60 mm/sec. |
Material | ABS Plus |
Moisture absorber | Yes |
Vacuum packaging | Yes |
Roundness | +/- 0,01 mm |
Net weight | 0,85 kg |