- Reduced price
- Sale
- Sale
- Sale
List of products by brand SparkFun - Strona 12
Loading...
NEO-M8U GPS Module - Dead Reckoning - Qwiic - SparkFun GPS‑16329
The u-blox NEO-M8U GPS module with Dead Reckoning provides accurate navigation even without a satellite signal. It supports multiple GNSS systems , runs on Qwiic...
Index: SPF-27113
Index: SPF-27113
LoRa Dipole Antenna 868MHz 2dBi - SMA - 200mm - SparkFun WRL-20855
The SparkFun SMA antenna is designed to operate in the frequency band used by European LoRa and IoT communication systems. With an operating range of 810 MHz to 910 MHz and a...
Index: SPF-27801
Index: SPF-27801
- New
KX134 - 3-axis accelerometer I2C Qwiic - SparkFun SEN-17589
KX134 3-axis digital accelerometer embedded on a module from SparkFun. The board features low power consumption and 16-bit resolution with selectable acceleration...
Index: SPF-19707
Index: SPF-19707
- Sale
- SPECIAL OFFERS
AS7263 NIR - Visible Light Spectrum Sensor - SparkFun SEN-14351
The module is equipped with a sensor of spectrum, i.e. the spectrum of visible light and NIR (near infrared light) that allows you to measure and describe how various...
Index: SPF-10121
Index: SPF-10121
Low Current Sensor ACS723 - 5A current sensor - SparkFun SEN-14544
Current sensor operating in the range from 10 mA to 5 A on the basis of Hall effect. The output is an analog voltage. The supply voltage is 5 V. It has a built-in amplifier and...
Index: SPF-12374
Index: SPF-12374
- Discontinued product
MIDI KIT - Shield dla Arduino - SparkFun DEV-12898
Module to connect the Arduino via MIDI Protocol. This interface is used to exchange information with synthesizers, sequencers and other popular music devices.
Index: SPF-08062
Index: SPF-08062
- Discontinued product
TPA2005D1 mono audio amplifier - SparkFun BOB-11044
Module with audio amplifier class D. Characterized by small power losses. It allows you to connect a speaker of 8 Ohms, power 1.4 watts. It has a connector for the...
Index: SPF-01770
Index: SPF-01770
- Discontinued product
Keyboard panel 2x2 - compatible with LEDs - SparkFun COM-07836
Overlay for the keyboard with 2x2 - 4 keys. Under each button, you can mount the LED in the through hole case of 3 or 5 mm. It allows you to create panel of keys with the...
Index: SPF-02273
Index: SPF-02273
- Discontinued product
Thermal imaging camera - FLiR Lepton Dev Kit V2 - SparkFun KIT-15948
A set containing the Flir Lepton V2 thermal imaging camera , and a board to facilitate its connection. The Lepton LWIR radiometric module used in the device has a resolution...
Index: SPF-16256
Index: SPF-16256
- Discontinued product
Thumb joystick stand - SparkFun BOB-09110
Stand in the form of PCB to facilitate connection of the joystick from the SparkFun.
Index: SPF-01635
Index: SPF-01635
Load Sensor Combinator (Ver. 1.1) - SparkFun BOB-13878
The module allows you to connect 4 load sensors - strain-gauge beams to one of the bridge via 4-wire cable. It finds application, for example, in the construction of the...
Index: SPF-07277
Index: SPF-07277
TEMT6000 - analog light intensity sensor module - SparkFun BOB-08688
An analog sensor measures the ambient light intensity. It works just like a regular transistor - the greater the intensity of the incident light, the higher the output voltage....
Index: SPF-02260
Index: SPF-02260
- Discontinued product
Adapter SOT23 to DIP 6-pin - SparkFun BOB-00717
Adapter enables the connection of the chips in SMD SOT-23 cases to threaded output holes of DIP. It also allows you to connect circuits to a breadboard or connect with wires.
Index: SPF-01760
Index: SPF-01760
APDS-9960 RGB sensor and 3,3V I2C gesture detector - SparkFun SEN-12787
Module with sensor that measures the light intensity of the environment, enables the detection of proximity of an object and recognize hand gestures. With this sensor, you can...
Index: SPF-03065
Index: SPF-03065
Pro Micro - 5V/16MHz - Atmega32u4 module - SparkFun DEV-12640
Module based on the Arduino Leonardo, is characterized by small size. It has the AVR Atmega32U4 microcontroller. It is equipped with 20 digital inputs/outputs, as well as...
Index: SPF-01594
Index: SPF-01594
Biomedical electrodes - 10pcs - SparkFun SEN-12969
10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.
Index: SPF-02604
Index: SPF-02604
HX711 - amplifier for a strainer beam - SparkFun SEN-13879
Operational amplifier is designed to handle strain beams. The system is supplied with the voltage from 2.7 V to 5.0 V, communicates via a two-wire bus: the data line and a...
Index: SPF-04283
Index: SPF-04283
Thumb Joystick with button - SparkFun COM-09032
A joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions and the button is activated...
Index: SPF-01634
Index: SPF-01634
Arcade Concave Button 3.5cm - blue - SparkFun COM-09337
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10079
Index: SPF-10079
- Discontinued product
Qwiic JST Connector - SMD 4-pin - SparkFun PRT-14417
JST 4-pin SMD connector for Qwiic boards using the I2C interface. Pins pitch is 1 mm.
Index: SPF-10106
Index: SPF-10106
ADXL335 3-axis analog accelerometer - SparkFun SEN-09269
Sensor for measuring acceleration in three axes in the range of ± 3 g. Powered with the voltage from 1.8 V to 3.6 V; it consumes only 320 uA of the current. The output signal...
Index: SPF-02404
Index: SPF-02404
- Discontinued product
Simple Servo Trigger Servo Controller - SparkFun WIG-13118
A simple controller allowing the servo to move from position A to B after changing the state on the IN input pin. The position can be adjusted with potentiometers. The system...
Index: SPF-03550
Index: SPF-03550
FlexiForce Pressure Sensor - 25lbs. (1" area) - SparkFun SEN-11207
Pressure sensor reduces its resistance when the force put to the round tip, increases. The round sensor with a diameter of 25.4 mm, the maximum pressure is 11 kg.
Index: SPF-10118
Index: SPF-10118
LiPo Charger/Booster - Li-Pol charger - 5V/1A - PAM2401 - SparkFun PRT-14411
Charger for 1-cell lithium polymer batteries with a nominal voltage of 3.7 V. The supply voltage is 5 V, the maximum current is 500 mAh. The device has a 5 V 1 A booster. The...
Index: SPF-10105
Index: SPF-10105