- New
- Reduced price
- Sale
- Reduced price
- Sale
Waterproof probe with temperature sensor DS18B20 - Okystar - 10m
Index: OKY-16557
- Reduced price
- Sale
List of products by brand SparkFun - Strona 4
Loading...
RedBot - line sensor (line follower) - SparkFun SEN-11769
Addition to the RedBot Kit extending the robot with the ability to detect the line. The sensor detects light reflected from the surface and on its basis determines the color of...
Index: SPF-02411
Index: SPF-02411
Qwiic HAT for Raspberry Pi - SparkFun DEV-14459
Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.
Index: SPF-10664
Index: SPF-10664
RFID reader ID-20LA - 125kHz - SparkFun SEN-11828
Easy to use reader with integrated antenna, allowing to receive and transmit through the serial interface to the main device (e.g. Arduino), the ID of the RFID identifier....
Index: SPF-01677
Index: SPF-01677
Simple Servo Trigger Servo Controller - SparkFun WIG-13118
A simple controller allowing the servo to move from position A to B after changing the state on the IN input pin. The position can be adjusted with potentiometers. The system...
Index: SPF-03550
Index: SPF-03550
Servo Trigger - Continuous Rotation - SparkFun WIG-13872
Module facilitating servo operation. On receiving an external signal, the controller moves the servo from position A to position B at a predetermined speed. The supply voltage...
Index: SPF-06555
Index: SPF-06555
FlexiForce Pressure Sensor - 25lbs. (1" area) - SparkFun SEN-11207
Pressure sensor reduces its resistance when the force put to the round tip, increases. The round sensor with a diameter of 25.4 mm, the maximum pressure is 11 kg.
Index: SPF-10118
Index: SPF-10118
- Sale
- SPECIAL OFFERS
Piezoelectric vibration sensor - SparkFun SEN-09196
Piezoelectric vibration sensor, used for measurement of touch, vibration, shock and flexibility. A small AC voltage and high voltage up to 90 V, it occurs when the foil moves...
Index: SPF-10115
Index: SPF-10115
LiPo Charger/Booster - Li-Pol charger - 5V/1A - PAM2401 - SparkFun PRT-14411
Charger for 1-cell lithium polymer batteries with a nominal voltage of 3.7 V. The supply voltage is 5 V, the maximum current is 500 mAh. The device has a 5 V 1 A booster. The...
Index: SPF-10105
Index: SPF-10105
Qwiic Mux Breakout - 8-channel module with multiplexer I2C - TCA9548A - SparkFun BOB-16784
Module with a multiplexerem TCA9548A, allows you to connect 8 different digital I2C interfaces to one interface. Works with a supply voltage from 1.65 V to 5.5 V. The address...
Index: SPF-12723
Index: SPF-12723
WiFi module Thing Plus - ESP32 WROOM - SparkFun WRL-15663
The SparkFun module is equipped with ESP32 WROOM and ESP32-D0WDQ6 for wireless communication using WiFi and Bluetooth. Thing Plus for communication uses Qwiic Connect...
Index: SPF-16704
Index: SPF-16704
GPS NEO-M9N module - built-in antenna - Qwiic - SparkFun GPS-15733
NEO-M9N high quality module with 92 channel GNSS receiver and built-in antenna. It allows receiving signals from GPS , GLONASS , Beidou and Galileo with an accuracy...
Index: SPF-18450
Index: SPF-18450
Servo pHAT - 16-channel PWM I2C driver for Raspberry Pi - SparkFun DEV-15316
The Servo pHAT overlay from SparkFun allows you to control up to 16 servos via an I2C interface. The chip generates PWM signals up to 1.6 kHz with 12-bit precision ....
Index: SPF-18725
Index: SPF-18725
SparkFun Qwiic Adapter - SparkFun DEV-14495
The Qwiic adapter from SparkFun provides an ideal way to convert a regular I2C bus into a board with a Qwiic connector for simple connection. The adapter has two Qwiic...
Index: SPF-19152
Index: SPF-19152
SparkFun Qwiic Shield for Teensy - Extended - DEV-17119
Overlay produced by SparkFun for Teensy series modules such as Teensy 4.1, Teensy 3.6 and Teensy 3.5. The board extends the Teensy module with four additional Qwiic...
Index: SPF-19172
Index: SPF-19172
QwiicBus EndPoint - SparkFun COM-16988
QwiicBus system component, allowing to extend the range of the I2C communication bus. It uses NXP PCA9615 chip, which converts two default I2C signals (SDA data line and SCL...
Index: SPF-19394
Index: SPF-19394
Qwiic MultiPort - SparkFun BOB-18012
Qwiic allows you to quickly create projects using an easy-to-use connector and appropriate cables. Unfortunately not all modules are equipped with two Qwiic ports. This...
Index: SPF-19507
Index: SPF-19507
LSM6DSO - 3-axis accelerometer and I2C/SPI gyroscope - SparkFun SEN-18020
PCB with 6DoF LSM6DSO chip containing accelerometer and gyroscope along with 9 kB FIFO buffer and embedded processing interrupt functions. The device can detect shock, roll,...
Index: SPF-19708
Index: SPF-19708
Qwiic flexible cable with 4-pin connector - 20cm - SparkFun PRT-17258
4-pin cable, length 20 cm . Terminated on both sides with JST Qwiic 4-pin connector with 1 mm pitch.
Index: SPF-19837
Index: SPF-19837
Pro Micro - USB-C - 5V/16MHz - ATmega32U4 - SparkFun DEV-15795
Module based on Arduino Leonardo , characterized by small size. New version Pro Micro enriched with USB-C connector, Qwiic connector or reset button. It has an...
Index: SPF-19842
Index: SPF-19842
Qwiic Cable Kit - SparkFun KIT-15081
Set of gaining more and more popularity Qwiic cables by SparkFun . Set contains 10 wires with different lengths and contacts to connect to your programming platform or...
Index: SPF-19848
Index: SPF-19848
Teensy 4.0 ARM Cortex-M7 - compatible with Arduino - SprakFun DEV-15583
A small size module with great possibilities. Teensy 4.0 is a development board adapted for use with contact boards. Module is equipped with 32/64 -bit microcontroller with...
Index: SPF-19850
Index: SPF-19850
Teensy 4.1 ARM Cortex M7 with connectors - compatible with Arduino - DEV-16996
SparkFun's compact board, the Teensy 4.1, features an ARM Cortex-M7 processor with an NXP iMXRT1062 chip, with four times more Flash memory than the Teensy 4.0 version,...
Index: SPF-20186
Index: SPF-20186
AP63203 - step-down Buck voltage regulator with screw connector - 3,3V 2A - SparkFun COM-18356
A voltage regulator in the form of a step-down converter, made by SparkFun. The AP63203 converter is designed to change the input voltage from 3.8 V to 32 V to the output:...
Index: SPF-20234
Index: SPF-20234