- New
- New
- New
- New
Linear Actuator Super Power Jack 2000N 7,5mm/s 12V - 30cm stroke
Index: MOT-05364
- Reduced price
- Sale
Heatsink with fan - for Odyssey-X86J4105 - Seeedstudio 114070141
Index: SEE-18808
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Raspberry Pi accessories - Strona 16
Loading...
M25360H06 lens M12 3,6mm 1/2,5'' - for ArduCam cameras - ArduCam LN004
M25360H06 M12 3.6 mm 1/2.5'' is a lens designed for ArduCam camera modules , compatible with Arduino and Raspberry Pi platforms. It is equipped with an infrared filter with...
Index: ACM-23592
Index: ACM-23592
Dual-band L1+L5 GPS module with LC29H(AA) GNSS chip overlay for Raspberry Pi - Waveshare 25278
Dual-band GPS module with LC29H GNSS receiver designed for Raspberry Pi minicomputers, supporting L1 and L5 bands. It uses multi-system signals from major positioning...
Index: WSR-23873
Index: WSR-23873
Seeedstudio LCD display module with a diagonal of 1.47'' , a resolution of 172 x 320 px and a vivid spectrum of 262,000 RGB colors . It has an SPI interface that...
Index: SEE-23898
Index: SEE-23898
PCIe Pipe 35mm flexible cable for NVMe Base and Raspberry Pi - Pimoroni PIM703
A flexible 35 mm ribbon cable enables convenient connection of the NVMe Base to the Raspberry Pi 5 . It is designed to run at PCIe Gen 3 speeds and also perfectly...
Index: PIM-24863
Index: PIM-24863
THT Prototype Board - Raspberry Pi
Board allows for independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer.
Index: MOD-01742
Index: MOD-01742
Mini Kit 16-channel PWM I2C driver - Servo Hat for Raspberry Pi - Adafruit 2327
Shield for Raspberry Pi to control 16 servos. The system generates the PWM signal with frequency up to 1.6 kHz with 12 bit precision. Board is suitable for connectors of the...
Index: ADA-03283
Index: ADA-03283
Si5351A - 160MHz I2C signal generator - Adafruit 2045
The chip features a 25 MHz precision oscillator and PLL loops, which can generate signals from 8 kHz to 160 MHz. The chip works with voltages up to 3 V to 5.0 V, the Vpp value...
Index: ADA-04174
Index: ADA-04174
Logic level transmitter TXB0104 bi-directional, 4-channel - SparkFun BOB-11771
The module allows to exchange the data between systems that use the most popular voltage levels: from 1.2 V to 3.6 V for VCCA inputs, and from 1.65 V to 5.5 V for VCCB inputs....
Index: SPF-04290
Index: SPF-04290
Grove - GrovePi+ v3.0 Shield for RaspberryPi 4/3/2/B/B+/A+
Shield for Raspberry Pi is equipped with a w15 4-pin connectors for connecting sensors from the Grove minicomputer series. It cooperates with more than a hundred modules.
Index: SEE-04451
Index: SEE-04451
Proto Board for Raspberry Pi Zero
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer in a version Zero.
Index: MSX-05794
Index: MSX-05794
PiUART - USB - USB-UART converter for Raspberry Pi - Adafruit 3589
Miniature shield for Raspberry Pi which is also a converter of USB-UART. Connected directly to GPIO pins. The module also has a power switch. It is compatible with Raspberry Pi...
Index: ADA-09816
Index: ADA-09816
Automation Hat 3x relay + LED - Raspberry Pi extension
The module is working with a Raspberry Pi, it is mounted on the GPIO connectors, designed for home automation. It has 3 relays of 24 V / 2 A, 15 LED indicators, analogue...
Index: PIM-10636
Index: PIM-10636
Camera ArduCam Sony IMX219 8MPx CS mount - night with lens LS-1820 and IR-CUT - for Raspberry Pi
Camera module with sensor Sony IMX219 equipped with a lens LS-1820-NOIR, IR-CUT, enabling work in day and night. It connects into a special connector on a minicomputer...
Index: ACM-11697
Index: ACM-11697
Kruger&Matz microHDMI - HDMI cable 3m
HDMI - microHDMI cable, male-male, with the length of 3 meters . It can be used to transfer the image onto the Raspberry Pi 4 and Raspberry Pi 5.
Index: LEC-14745
Index: LEC-14745
Screen DPI - LCD IPS 5'' 800x480px for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 16381
Wavseshare IPS screen with 5" diagonal and 800 x 480 px resolution. The set includes a module in the form of GPIO Raspberry Pi 4B / 3B+ / 3B / Zero pins overlay. The...
Index: WSR-15511
Index: WSR-15511
E-paper E-Ink 7,8'' 1872x1404px - display for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 16766
The Waveshare E-Ink display, made using e-paper technology, has a diagonal of 7.8" and a resolution of 1872 x 1404 px , and can display two colors: black and white. It...
Index: WSR-15514
Index: WSR-15514
Fisheye lens M12 1,56mm with adapter for Raspberry Pi camera - ArduCam LN031
Wide angle lens with Fisheye effect, viewing angle is 180° . The focal length is 1.56 mm and the iris is F2. Mounting method M12, the set includes adapter that allows to...
Index: ACM-17066
Index: ACM-17066
M12 lens 3,56mm with adapter for Raspberry Pi camera - ArduCam LN033
Lens with 3.56 mm focal length and 90° viewing angle. It has been equipped with M12 mount and CS Mount adapter, so it also cooperates with Raspberry Pi HQ camera.
Index: ACM-17070
Index: ACM-17070
Raspberry Pi 4 case - Argon Poly+ Vented - black
The housing designed for Raspberry Pi 4B is made of ABS in black . The upper part of the enclosure has ventilation holes, is mounted on a latch, so that it provides full...
Index: ARG-17274
Index: ARG-17274
Dual channel CAN BUS Shield for Raspberry Pi - Seeedstudio 103990563
Seeedstudio shield for Raspberry Pi minicomputers. Supports CAN FD interface with transmission speed up to 8 Mb/s , it is a faster and more efficient version of the...
Index: SEE-17684
Index: SEE-17684
Replacement CSI/DSI Connector for Raspberry Pi 4B/3B+/3B/2B
The CSI/DSI connectors are used as camera and display slots in the Raspberry Pi 4B/3B+/3B/2B. The subject of sale is a spare part, which can be soldered into the board in...
Index: DNG-18275
Index: DNG-18275
M40210M09S M12 Low Distortion Lens - For ArduCam Cameras - Arducam LN014
The M40210M09S lens is manufactured by ArduCam. It has low distortion which is less than 1%. The lens is compatible with cameras designed for Arduino and Raspberry Pi. Its...
Index: ACM-18604
Index: ACM-18604
Automation HAT Mini - HAT for Raspberry Pi - Pimoroni PIM487
Automation HAT Mini is an overlay designed for Raspberry Pi minicomputers. The small size of the overlay gives great possibilities in automation . It is equipped with 24 V / 2...
Index: PIM-19070
Index: PIM-19070
IO Expansion HAT for Raspberry Pi Zero/Zero W - DFRobot DFR0604
Overlay for Zero / Zero W version of Raspberry Pi minicomputer. It shows various sections of Raspberry Pi pins such as digital, analog, PWM, I2C, UART, SPI, I2C.
Index: DFR-19895
Index: DFR-19895