Filter by
Price
0 667
more (-5) ok clear
Manufacturers
more (530) ok clear
Filter

Promotion products

Recomendations

Products: 806
Loading...

Argon BLSTR DAC with Ground Loop Isolator (add-on for Argon ONE V3 Only)

The Argon BLSTR DAC sound card equipped with a Texas Instruments PCM5122 converter is an addition designed for the Argon One V3 housing , which improves the sound quality...
4.8 (5)
Index: ARG-24842
Index: ARG-24842
Shipping in 24 hours
Available
Regular price €31.50 Price €31.50

Silicone keyboard Esperanza EK126W USB/OTG - white

Comfortable, quiet, very thin, silicone USB keyboard. Resistant to dirt, water splashes, dust, detergents, disinfectants. Works with PC, Mac and Raspberry Pi Raspbian....
Index: KAP-07388
Index: KAP-07388
Shipping in 24 hours
Available
Regular price €6.90 Price €6.90

DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592

Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
5.0 (2)
Index: DFR-15298
Index: DFR-15298
Shipping in 24 hours
Available
Regular price €17.90 Price €17.90

Pirate Audio 3W Stereo Amp - 3W amplifier with display - AMP for Raspberry Pi - Pimoroni PIM484

Overlay with two DAC chips for the Raspberry Pi minicomputer. The board is equipped with a 3 W stereo audio output , two speaker terminals and a 1.3 " colour IPS display ....
5.0 (1)
Index: PIM-15898
Index: PIM-15898
Shipping in 24 hours
Available
Regular price €25.90 Price €25.90

M12 lens 3,56mm with adapter for Raspberry Pi camera - ArduCam LN033

Lens with 3.56 mm focal length and 90° viewing angle. It has been equipped with M12 mount and CS Mount adapter, so it also cooperates with Raspberry Pi HQ camera.
5.0 (1)
Index: ACM-17070
Index: ACM-17070
Shipping in 24 hours
Available
Regular price €22.90 Price €22.90

ADC-DAC Pi Zero MCP3203 + MCP4822 - A/C and C/A converter 12-bit SPI - overlay for Raspberry Pi

Module with high precision converter of A/C and C/A in the form of shields for GPIO connectors of Raspberry Pi. It features 2 12-bit channels of the analog outputs and 2...
Index: ABE-11719
Index: ABE-11719
Shipping in 24 hours
Available
Regular price €18.50 Price €18.50

E-paper E-Ink (B) 4.2'' 400x300px v2.1 - module with three-color SPI display - Waveshare 13454

Module with 4.2 '' e-paper display with 400 x 300 px resolution. It communicates via SPI interface e.g. with Arduino or Raspberry Pi. Displays 3 colours: black, white and red.
5.0 (2)
Index: WSR-15129
Index: WSR-15129
Shipping in 24 hours
Available
Regular price €38.50 Price €38.50

Raspberry Pi Touch Display 2 - 7'' 1280x720px capacive DSI for Raspberry Pi

Raspberry Pi Touch Display 2 is a modern, 7-inch touchscreen that allows easy operation of Raspberry Pi devices. With a resolution of 720 x 1280 px and a wide viewing...
5.0 (1)
Index: RPI-25487
Index: RPI-25487
Shipping in 24 hours
Available
Regular price €71.90 Price €71.90
  • New

Maker pHAT - GPIO extension for Raspberry Pi

PHAT shield for Raspberry Pi, it has signed GPIO pins to facilitate the recognition of individual pins, three programmable buttons, status LEDs for GPIO ports and active buzzer.
Index: CTN-13451
Index: CTN-13451
Shipping in 24 hours
Available
Regular price €11.90 Price €11.90

Case for Raspberry Pi CM4IO - black-transparent opened

The transparent enclosure designed for Raspberry Pi CM4IO is made of acrylic. The walls are 3mm thick. Housing consists of two parts assembled with included screws and...
4.0 (1)
Index: GRL-19019
Index: GRL-19019
Shipping in 24 hours
Available
Regular price €5.90 Price €5.90

Module for capturing video from HDMI / HDMI to USB 2.0 adapter - Waveshare 21559

High definition video capture module. The adapter is equipped with an HDMI connector for 4K image input (3850 x 2160 px at 30 Hz) and an output in the form of a USB 2.0...
5.0 (2)
Index: WSR-21727
Index: WSR-21727
Shipping in 24 hours
Available
Regular price €15.50 Price €15.50

HiFiBerry DAC+ RCA light - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero

Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with RCA connectors. It is used in the device of high-quality, the ESS DAC has a resolution of 24-bits, it...
5.0 (2)
Index: RHF-04876
Index: RHF-04876
Shipping in 24 hours
Available
Regular price €34.50 Price €25.88
  • Reduced price
  • Promotion

Servo pHAT - 16-channel PWM I2C driver for Raspberry Pi - SparkFun DEV-15316

The Servo pHAT overlay from SparkFun allows you to control up to 16 servos via an I2C interface. The chip generates PWM signals up to 1.6 kHz with 12-bit precision ....
5.0 (1)
Index: SPF-18725
Index: SPF-18725
Shipping in 24 hours
Available
Regular price €15.00 Price €15.00

JustBoom Digi Zero - sound card for Raspberry Pi Zero

Shield for Raspberry Pi Zero with high quality S/PDIF interface. It is used in the device, system has a resolution of 24 bit with the clock speed of 192 kHz. It has a...
5.0 (2)
Index: SUP-09579
Index: SUP-09579
Shipping in 24 hours
Available
Regular price €30.50 Price €30.50

Qwiic HAT for Raspberry Pi - SparkFun DEV-14459

Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.
Index: SPF-10664
Index: SPF-10664
Shipping in 24 hours
Available
Regular price €8.00 Price €8.00

Pan-Tilt HAT for Raspberry Pi - Waveshare 16138

Dedicated to the Raspberry Pi , Pan-Tilt with a camera basket. The module is equipped with an I2C communication interface and a built-in system responsible for PWM motion...
4.3 (2)
Index: WSR-14430
Index: WSR-14430
Shipping in 24 hours
Available
Regular price €19.50 Price €19.50

Pirate Audio Speaker -speaker with display - DAC for Raspberry Pi - Pimoroni PIM485

DAC amplifier cap for Raspberry Pi minicompouter. It has a built-in 1 W / 8 Ω speaker and a 1.3" colour IPS display. Additionally, the board is equipped with 4...
5.0 (3)
Index: PIM-15897
Index: PIM-15897
Shipping in 24 hours
Available
Regular price €30.00 Price €30.00

Raspberry Pi V3 camera mount - black

Black handle designed for the official Raspberry Pi V3 camera (also works with the V2 version). It allows you to adjust the angle of the camera and thus the angle of the...
Index: GRL-22862
Index: GRL-22862
Shipping in 24 hours
Available
Regular price €4.50 Price €4.50

Extension cable for cameras - 300 mm - ArduCam B0186

Cable to extend the lenses of ArduCam cameras. The extension cable is compatible with IMX219 sensor located in original Raspberry Pi V2 camera. The cable is 300 mm long.
Index: ACM-15748
Index: ACM-15748
Shipping in 24 hours
Available
Regular price €15.90 Price €15.90

Environmental sensor - hat for Raspberry Pi - Waveshare 20471

An environmental sensor in the form of an overlay for Raspberry Pi equipped with a number of useful sensors. It has built-in temperature , humidity , air pressure, ambient...
5.0 (1)
Index: WSR-20550
Index: WSR-20550
Shipping in 24 hours
Available
Regular price €34.50 Price €34.50

Camera ArduCam Sony IMX219 8MPx CS mount - night with lens LS-2718 - for Raspberry Pi

Camera module with sensor Sony IMX219 equipped with a lens LS-2718-NOIR " to work in the day and at night. It connects into a special connector on a minicomputer Raspberry Pi...
Index: ACM-11698
Index: ACM-11698
Shipping in 24 hours
Available
Regular price €48.50 Price €48.50

GNSS/GPS/BDS/QZSS L76B module for Raspberry Pi Pico - Waveshare 20072

Waveshare GNSS module to enable multiple GPS satellite systems using Raspberry Pi Pico module. The overlay for RPi Pico is based on L76B chip and supports satellite systems...
5.0 (1)
Index: WSR-20109
Index: WSR-20109
Shipping in 24 hours
Available
Regular price €18.90 Price €18.90

Time of Flight Camera for Raspberry Pi - Arducam B0410

Camera using Time of Flight technology, equipped with a MIPI-CSI2 connector and offering a measurement range of up to 4 meters with an accuracy of 2 cm. The resolution of...
5.0 (1)
Index: ACM-22392
Index: ACM-22392
Shipping in 24 hours
Available
Regular price €61.50 Price €61.50

Mount for Raspberry Pi Camera Module 2 and 3 - Tripod Compatible

The holder for Raspberry Pi Camera Module 2 and 3 modules allows you to mount the camera on a classic tripod thanks to the 1/4" thread. The manufacturer has provided 4 holes...
Index: ODS-23177
Index: ODS-23177
Shipping in 24 hours
Available
Regular price €3.90 Price €3.90