- New
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
ELECTRONICS - Strona 103
Loading...
BleBox TwilightSwitch - twilight LED switch 12-24V / 4A
Mini twilight switch used with LED strips. Works with voltage from 12V to 24V and electric current up to 4A. It turns the light on at dusk and off when it gets bright. No...
Index: BOX-08902
Index: BOX-08902
LED indicator 12V DC - 8mm - green
LED indicator, working voltage 12 V DC. It has a diameter of 8 mm.
Index: LED-08986
Index: LED-08986
LED indicator 12V DC - 19mm - red with a buzzer
The light operates with a voltage of 12 V DC. It has a diameter of 19 mm.
Index: LED-09008
Index: LED-09008
Waterproof headlamp equipped with a diode COB LED 3 W with brightness of luminous flux 150 LM. The flashlight has three modes: 100%, 25% and flashing.
Index: NSZ-09073
Index: NSZ-09073
GPS USB/TTL module for Raspberry
GPS module based on the L80-R-39 system. It supports 66 search channels and 22 tracking channels. It is working with the voltage of 3.3 V - 5 V. The module has the USB and the...
Index: DFR-09383
Index: DFR-09383
GSM antenna 18x22mm - self-adhesive - 15cm
Antenna operating in the GSM band, it has U. FL connector. It operates at frequencies from 800 MHz to 1900 MHz. It has a layer of self-adhesive tape. Dimensions: 18 x 22 mm....
Index: AKS-10143
Index: AKS-10143
Solid state relay SSR-40A 480VAC / 40A - 32VDC
Single-phase solid -state relay SSR with a voltage of 480 V AC and 32 V DC. The rated current is 40 A.
Index: AKS-10219
Index: AKS-10219
TB6612FNG - two-channel driver for 15V/1.2A motors with connectors - SparkFun ROB-14450
SparkFun module with two channel DC motor driver. It is powered from 2.7 V to 15 V . Continuous current per channel is 1.2 A. It has soldered goldpin connectors.
Index: SPF-10666
Index: SPF-10666
Miniature boost converter module supplied with voltage from 3 V to 16 V . The output voltage is set to 3.3 V . Maximum current 1,5 A. Dimensions: 15 x 13 x 6 mm. The voltage...
Index: PLL-10674
Index: PLL-10674
Miniature boost converter module supplied with voltage from 3 V to 16 V . The output voltage is set to 3.3 V . Maximum current 1,5 A. Dimensions: 15 x 13 x 4 mm. The...
Index: PLL-10676
Index: PLL-10676
OLED 1,3'' 128x64px module for Raspberry Pi 4/3+/3/2/Zero - Waveshare 13890
Shield for Raspberry Pi and Jetson Nano with blue OLED display with a diagonal of 1.3" and a resolution of 128 x 64 px. The screen is based on SH1106 driver, it communicates...
Index: WSR-10752
Index: WSR-10752
DFRobot - dual digital potentiometer 100 kΩ
The digital potentiometer is a type of mixed IC signal which is able to dynamically change the internal resistors via MCU. It can be used for applications such as dimming of...
Index: DFR-10838
Index: DFR-10838
26 IDC gray ribbon cable gray 1.27 mm raster - 30m roll
IDC ribbon cable, 26-vein. Pitch: 1,27 mm. Roller: 30 m.
Index: AKS-10875
Index: AKS-10875
Ribbon cable 20 gray IDC, raster 1.27mm - roll 30.5m
IDC 20 core ribbon cable. Raster: 1.27 mm. Roll: 30,5 m .
Index: AKS-10951
Index: AKS-10951
DFRobot Gravity - TEMT6000 analog light sensor
Analog ambient light sensor TEMT6000, compatible with Arduino. The sensor allows to determine the light density and reflects the analog voltage signal back to Arduino. The...
Index: DFR-11253
Index: DFR-11253
DFRobot Gravity - digital sound generator - buzzer
Digital buzzer module for Arduino and Raspberry Pi, which can be controlled via low and high status. When changing the frequencies of the buzzer, you can hear a different...
Index: DFR-11263
Index: DFR-11263
DFRobot Gravity - digital IR transmitter
Digital IR transmitter from the Gravity, operating at a frequency of 38 kHz with a voltage of 5 V. The module communicates with an IR transmitter, after pairing the modules.
Index: DFR-11268
Index: DFR-11268
Module with blue backlight, equipped with a connector Gravity is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11269
Index: DFR-11269
DFRobot Gravity - digital button Tact Switch - white
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-11278
Index: DFR-11278
DFRobot Gravity - adapter for the GP2Y1010AU0F dust sensor
Adapter for the direct connection of the sensor GP2Y1010AU0F using the Gravity interface for Arduino without additional modules and the prototype board.
Index: DFR-11282
Index: DFR-11282
Grove - AC current sensor TA12-200
The sensor measures the intensity of the current flowing in the pipeline without its opening. Measurement occurs through the insulation on the one wire, output is the current...
Index: SEE-11306
Index: SEE-11306
Grove - L298N - two-channel motor controller 15V / 1A
Grove series module equipped with a two-channel H-bridge L298N , controlled by ATmege 8L. The circuit allows to regulate the direction of rotation of motors with maximum...
Index: SEE-11320
Index: SEE-11320
Grove - infrared thermometer OTP-538U IR
Module from the Grove series, based on a sensor OTP-538U which, to measure the temperature, is using the analysis of infrared radiation in the range from -10 °C to 100 °C. It...
Index: SEE-11324
Index: SEE-11324
Grove - RS-06WD reflectance sensor v1.1
Module from the Grove is equipped with the reflective sensor RS-06WD. It consists of LED emitting the infrared light and phototransistor of high sensitivity. It is supplied...
Index: SEE-11331
Index: SEE-11331