Modern medicine is definitely not limited to x-rays, stethoscopes or pulse measuring devices. Currently, we live in times when there is practically no week for inventing new devices that significantly affect the effectiveness of diagnostic and treatment processes.
Medical sensors
Biomedical electrodes - 10pcs - SparkFun SEN-12969
10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.DFRobot Gravity - pH analog sensor/meter
Analog pH meter with an analgue output. Allows to measure water quality. It has an accuracy of +/- 0.1 pH, which is sufficient for most applications. Equipped with LED, BNC...Fermion v2.0 - Pulse Oximeter and Heart Rate Monitor - MAX30102 - I2C - DFRobot SEN0344
Sensor module with integrated MAX30102 chip from DFRobot. This is an integrated pulse oximetry biosensor module that allows you to measure heart rate and monitor saturation,...MyoWare 2.0 Muscle Sensor - EMG muscle sensor - SparkFun DEV-21265
The MyoWare 2.0 EMG muscle sensor designed by Advancer Technologies , which allows you to implement control-based applications through muscle contraction and relaxation. The...Heartbeat Detection Sensor - Iduino SE049
A sensor that allows you to measure your pulse with your finger using a phototransistor. The red LED lights up each time it detects a pulse. Powered by 5 V.MyoWare 2.0 Reference Cable - SparkFun CAB-19244
Connection cable designed for the MyoWare 2.0 ecosystem. Connects an electrode to the MyoWare 2.0 muscle sensor reference pin. The pin of the cable should be connected to the...Grove - GSR sensor - electrical resistance of the skin
Module from the Grove series equipped with GSR sensor using the galvanic-skin reaction. It is powered with the voltage of 3.3 V or 5V. The s ensors of this type are used in...Cables for biomedical electrodes - SparkFun CAB-12970
Wires ended on the one side with three connectors for biomedical electrodes, on the other, with jack connector of a 3.5 mm.DFRobot Gravity: Analog Heart Rate Monitor Sensor (ECG) For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog signal. The kit includes a probe,...Sensor for measuring heart activity - AD8232 - SparkFun SEN-12650
Module for measuring electrical activity of the human heart. The output is an analog signal which can be saved as EKG. The sensor is easy to operate, the manufacturer provides...Grove - heart rate sensor with a clip on the ear
Set for monitoring the heart rate, contains an ear clip with a wire and receiver module. The results can be displayed on the monitor through a serial port. The supply voltage...Grove - Sensor for measuring EMG muscle activity
Module from the Grove series that allows you to collect the bioelectric signal generated by the human muscles (EMG). The output is an analog signal that can be read using any...MyoWare 2.0 Arduino Shield - SparkFun DEV-18426
The MyoWare 2.0 shield for Arduino is equipped with six 3.5 mm TRS Jack connectors , to which you can connect MyoWare 2.0 sensors or the Link Shield using the TRS - TRS...Disposable ECG Electrodes Pack (12 pcs)
Disposable EKG electrodes designed for heart examination and other biomedical measurements. The set consists of 12 self-adhesive sensors of breathable fabric and foam with...MyoWare 2.0 Cable Shield - SparkFun DEV-18386
EMG Muscle Sensor Cap with 3.5mm TRS Jack connector , to which you can connect a traditional cable with three MyoWare 2.0 electrodes, which allows you to test and use the...Heart rate monitor - SparkFun SEN-11574
Module for measuring the human heart rate, compatible with Arduino. It is working with the voltage from 3 V to 5 V, the output is the analog signal. The kit includes a probe...Particle Sensor Breakout - MAX30101 - SparkFun SEN-16474
The sensor is based on a system MAX30101 and allows for the determination of the distance, pulse, smoke, and even blinking of an eye. It has 3 LEDs and a very responsive...DFRobot Gravity: Heart Rate Monitor Sensor For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog or digital signal. The kit...mmWave Radar Sensor - 24GHz radar sensor for sleep monitoring - MR24BSD1 - Seeedstudio 101990885
The MR24BSD1 24 GHz radar module, which is used to monitor the quality of human sleep , detect body movement and stillness along with the accompanying human breathing rate...MyoWare 2.0 Muscle Sensor Basic Kit - Medical Sensor Kit - SparkFun KIT-21267
MyoWare 2.0 Muscle Sensor Kit in the Basic version, containing the Muscle Sensor (version 2.0.4), an overlay with a segment LED display and 10 biomedical electrodes that...MyoWare 2.0 Muscle Sensor Development Kit - Medical Sensor Kit - SparkFun KIT-21269
The MyoWare 2.0 Muscle Sensor Development Kit includes MyoWare 2.0 ecosystem sensors and accessories that allow you to measure and visualize muscle activity in the human...DFRobot Gravity - analogue EMG sensor, electromyograph -OYMotio.n
The EMG sensor was created through the cooperation of DFRobot and OYMotion. EMG - electromyograph, sensor of electric activity of muscles and peripheral nerves of human. This...MR60BHA1 60GHz mmWave Radar Module - Respiratory Heartbeat Detection - Seeedstudio 101990886
The module is based on the radar heartbeat and breathing sensor - MR60BHA1 60 GHz . The heart rate and breath rate sensor operates on the basis of the theory of frequency...See also
- Piezoelectric sensors
- Optical sensors
- Oxygen sensors
- Resistance sensors
- Door sensors
- Nfc readers
- Inductive sensors
- RPM sensors
- Led motion detectors
- Tilt sensors
- Accelerometers
- Twilight sensors
- Wifi temperature sensors
- Hall effect sensors
- QR readers
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Limit switches
- Sensors of light and color
- Gas sensors
- Magnetic sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules
- Gravity modules
So nowadays, medicine is very technologically advanced devices equipped with various types of medical sensors. In the Botland store you will find various types of medical equipment that has a versatile or specialized use. Our components are used by scientific laboratories, medical startups, schools and universities as well as large companies. In this category you will find products that are compatible with other electronic components. Many of them can be adapted to your DIY project and programmed in your own way.
Build your own human heart rate monitor, pH meter and even an electromyography (EMG) with Botland - a device for measuring muscle activity! It's all possible and easier than you think! Find medical components for a variety of devices and projects that best suit your needs.
Electronics in medicine – professional medical sensors
Nowadays, electronics in medicine is ubiquitous and offers unlimited possibilities. Thanks to modern and innovative medical electronics, medical equipment is today characterized by the highest quality, a very high level of accuracy and repeatability of measurements. All results and values can be easily recorded, visualized and analyzed. Most importantly - thanks to modern medical electronics, we have access to the most advanced treatment techniques.
Most of us have had the ability to measure blood pressure using a seemingly ordinary blood pressure monitor. Such a device is in fact a sophisticated electronic device that makes use of a number of medical sensors. Medical sensors have significantly improved the accuracy of measurements, and hence the quality of treatment.
Today, we are able to check the condition of our circulatory system using the heart rate monitor without the presence and assistance of a doctor. You can build basic medical equipment yourself, which will be very satisfying. In the Botland store, we offer the purchase of the highest quality medical sensors. By purchasing individual components, you will be able to build a human heart rate monitor, a pH meter, or an EMG muscle activity electromyography. Of course, there are many more possibilities!
Medical sensors in robotics – there’s a lot to build
Medical sensors are a great opportunities for robotics designers. By equipping yourself with a set of medical sensors available in this category, you will have the opportunity to build a variety of structures! An additional advantage of the presented products is that many of them can be combined with other products, boards, modules and I/O devices. In other words - you can use medical components not only for medical purposes, but very versatile. In practice, you are only limited by your imagination.
Of course, the presented products are ideal for building medical robots. Basic programming knowledge is required (see courses and beginner kits in other store categories). Equip yourself with the presented modules and build a muscle-controlled robot module yourself, using the MyoWare series kit prepared by Botland. In the set you will find a sensor for measuring the activity of the EMG muscles, a power cover for the EMG sensor, an overlay for the EMG sensor, an overlay with LED diodes and a prototype cover for the EMG sensor. The set has been additionally equipped with all necessary biomedical cables and electrodes, which can also be used for EEG and ECG testing, as well as additional pins and connectors. The set is adapted to work with popular development kits – Arduino. Check also other medical sensors such as human heart rate sensors adapted to the DFRobot IO Expansion Shield.
Advanced PH sensors
Also pay attention to the PH sensors that we present in this category. If, in addition to electronics, automation and robotics, you are a plant lover or have a fish aquarium, you've come to the right place. In Botland you will find pH sensors with an accuracy of +/- 0.1 pH, thanks to which you can design your own water pH measurement system. What's more, we offer a pH sensor with an industrial probe that you can leave immersed in water for up to a year. Check out all the products in this category!