Description: Li-Pol Akyga 1000 mAh 1S 3.7 V Li-Pol Akyga battery - JST-BEC connector + socket - 40 x 30 x 8 mm.
Akygalithium-polymer batterywith a nominal voltage of 3.7 V and a capacity of 1000 mAh. Thanks to its low weight and small dimensions, the battery can be used in toys, GPS systems, 3D glasses for phones and TVs, MP3 players, as well as in smart clothes. The battery is equipped withPCMprotection to protect against excessive discharge and overload. The 150 mm long power cable is terminated with a female type JST connectorwitha 2.54 mm grid. A connector for the JST connector is included.
Li-Pol Akyga 1000 mAh 1S 3.7 V battery - JST-BEC connector + socket - 40 x 30 x 8 mm.
Li-Pol battery specification
- Battery type: lithium-polymer
-
Rated voltage: 3,7 V
-
Capacity: 1000 mAh
-
Nominal charge/discharge current: 0.2 C (0.2 A) / 0.2 C
-
Maximum charge/discharge current: 1 C (1 A) / 1 C
-
Operating temperature range: -20°C to 45°C
-
Power cable length: 150 mm
-
Connector type: Female 2-pin
- Security: PCM
-
Raster of exits: 2.54 mm
-
Dimensions: 40 x 30 x 8 mm
Important!
The lithium-polymer battery should only be charged using chargers specifically designed for this purpose. Under no circumstances should a used battery be opened or disposed of in mixed waste. The best solution is to take it to a recycling centre or dealer when buying a new battery. The use of damaged batteries with electrolyte leaks is dangerous to health and even life.
|
CAUTION! Before use, it is essential to read and understand the following |
