- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- EOL
- Promotion
Filament Fiberlogy ASA 1,75mm 0,75kg - with reusable spool - Yellow
Index: FLA-18486
- Reduced price
- Promotion
List of products by brand OEM - Strona 76
Loading...
ARK connector 5mm 2pin (+) - 10pcs
Screw, clamp, 2-pin conector. Pitch of 5 mm. Height of 8.4 mm. The screw for the cross screwdriver (+). Items are sold in sets of 10 pieces.
Index: GRL-13564
Index: GRL-13564
Magnetic sensor - reed contact CMD1423 + screws
Wireless proximity sensor activated magnetically. Case dimensions - 14 x 23 mm.
Index: AKS-10152
Index: AKS-10152
Tip for soldering station - type T-I
Tip for soldering station type T-I, it works, among others, with stations: 936, 937, 803, 968, 995 etc.
Index: LUT-01120
Index: LUT-01120
Electrolytic capacitor 1uF/50V 5x11mm 105C THT - 10pcs
Through hole electrolytic capacitor of 1 uf / 50 V. Pins' pitch: 2.5 mm. Size: Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-00298
Index: PAS-00298
DC 5.5x2.5mm socket with quick connection
DC φ5.5 x 2.5 mm socket (for AC adapter) with connector allowing you to fix the cable with a screwdriver.
Index: KAB-05819
Index: KAB-05819
Battery holder for 2 packs AAA (R6) with cover and switch
Basket with cover and switch for two AAA batteries (small fingers).
Index: AKC-01651
Index: AKC-01651
Bipolar transistor NPN BC639 80V/1A - 5pcs
Bipolar transistor NPN, 80 V, 1 A. Pinout: ECB. Price for 5 pieces.
Index: UCC-00683
Index: UCC-00683
Ethernet network module ENC28J60
A module that enables connection of the microcontrollers and development kits including the Arduino with the Ethernet network via the SPI interface.
Index: MOD-01471
Index: MOD-01471
Index: AKC-00173
Set of 350 wires for breadboards
Set of 350 wires of different length to connect the fields on the breadboards (test).
Index: KAB-00741
Index: KAB-00741
Nylon Distance Bolts 4 mm - 10 pcs.
Plastic distance bolts, length 4 mm, outer diameter of 5 mm and an internal 3.5 mm. Price for 10 pieces. Elements of this type are based on a screw, allow you to keep the...
Index: MTN-04228
Index: MTN-04228
Connecting cables female-female 20cm red - 10pcs
Set of 10 connection cables with a length of 20 cm in red colour.
Index: KAB-01435
Index: KAB-01435
Desoldering wick with wheel dispenser - 1.5mm
Wick for removing tin excess. A width of 1.5 mm, and a length of 1.5 meters. In the kit there is a dispenser facilitating the use of the wick.
Index: NSZ-07691
Index: NSZ-07691
Raspberry Pi camera ribbon wire - 60cm 15 wires 1mm raster
Tape with a length of 60 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-02440
Index: RPI-02440
Linaer voltage regulator LDO 3,3V LF33CV - THT TO220 - 5pcs
The LDO LF33CV stabilizer is used to supply circuits operating at 3.3 V. Maximum output current is 0.5 A. Price for 5 pcs.
Index: UCC-00126
Index: UCC-00126
Connecting cables female-female 60cm - 40pcs
Set includes 40 PCs of colorful connection cables with length of 60 cm, ended, from both sides, with female connector on goldpin.
Index: KAB-03479
Index: KAB-03479
Slide switch SS12T44 2-position - 5pcs.
Slide switch, straight to print with dimensions 12.1 x 8.7 x 5.5 mm . Lead spacing 3.00 mm.
Index: UCC-08051
Index: UCC-08051
Rotary linear potentiometer 1kΩ 1/8W - 5 pcs.
1 kΩ linear rotary potentiometer with the power of 1/8 W. Pins's pitch is 5 mm which allows you to attach the device to the breadboard. 5 pcs.
Index: PAS-09832
Index: PAS-09832
4-pin plug for printing, pitch of 2.54 mm. The set includes 5 x 4-pin plugs.
Index: KAB-06774
Index: KAB-06774
Temperature and humidity sensor DHT22 (AM2302) - module + cables
Module with temperature and humidity sensor with a digital interface, single-wired. Measuring range: temperature -40 to +80 °C, humidity 0-100% RH.
Index: MOD-02637
Index: MOD-02637
Electrolytic capacitor 220uF/25V 8x12mm 105C THT - 10pcs
220 uF/ 25V through-hole electrolytic capacitor. Leads raster: 3.5 mm. Size: Ø8x12 mm. Price for 10 pieces.
Index: PAS-00857
Index: PAS-00857
The jumper is designed for goldpin connectors - pitch of 2.54 mm. Price is for 10 pieces.
Index: KAB-09755
Index: KAB-09755
Hi-Link Power Supply HLK-PM01 100V-240VAC / 5VDC - 0.6A
The HLK-PM01 power supply from Hi-Link converts mains voltage (AC) from 100V to 240V into 5V direct current (DC) with a current capacity of 0.6A. It is ideal for powering...
Index: DNG-10929
Index: DNG-10929
A small device for cleaning the filament, used in 3D printers. The cleaner should be placed on the pillar. Located in the plastic housing, the sponge collects dirt from the...
Index: DNG-17470
Index: DNG-17470