List of products by brand Waveshare - Strona 3
Loading...
Temperature and humidity sensor DHT22 (AM2302) module + cables - Waveshare 11092
Module with temperature and humidity sensor with a digital interface, single-wired. Measuring range: temperature from -40 °C to +80 °C, humidity from 0% to 100 % RH.
Index: WSR-04920
Index: WSR-04920
Liquid level sensor - analog + wires - Waveshare 9525
The sensor is used for determining the liquid's level in the vessel. It is powered with the voltage from 2.0 V to 5.0 V. The output is an analog voltage which increases its...
Index: WSR-04503
Index: WSR-04503
Serial Expansion HAT - I2C, UART, GPIO for Raspberry Pi - Waveshare 15667
Shield with system SC16IS752 expanding the minicomputer Raspberry Pi with additional two communication channels of UART and GPIO ports programmable via I2C.
Index: WSR-13469
Index: WSR-13469
Touch screen LCD Rev 2.1 2.8'' 320x240px SPI + microSD reader - shield for Arduino - Waveshare 10684
Shield for Arduino with resistive TFT touch screen with a diagonal of 2.8". The screen has LED backlight and the resolution of 240 x 320 px. It works with 3.3 V and 5 V...
Index: WSR-04464
Index: WSR-04464
Converter USB-UART CP2102 - miniUSB port - Waveshare 8085
Converter which provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....
Index: WSR-04925
Index: WSR-04925
MQ-135 alcohol, benzen, ammonia sensor module - semiconductor - Waveshare 9528
Module with sensor MQ-135 detecting benzene, alcohol and smoke. It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: WSR-05520
Index: WSR-05520
E-paper E-Ink 4.2'' 400x300px - module with SPI display - Waveshare 13353
Module with 4.2" e-paper display with a resolution of 400 x 300 px. Communicates via the SPI interface, e.g. with Arduino or Raspberry Pi.
Index: WSR-09655
Index: WSR-09655
Stepper Motor HAT - 2 channels - 28V/2,5A for Raspberry Pi - Waveshare 15669
Shield for Rasberry Pi is equipped with a system DRV8825, it allows you to control two stepper motors with a resolution of steps of up to 1/32. It works with motors with a...
Index: WSR-13513
Index: WSR-13513
Waveshare touch display, resistive 5" for the Raspberry Pi with a resolution of 800 x 480 px. Works with Raspberry Pi version 4, 3, 2, B+, Zero, and Zero W via the HDMI...
Index: WSR-04467
Index: WSR-04467
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
Two-color graphical OLED display 0.96 '' (A) 128x64px SPI/I2C - angled connectors - Waveshare 9085
0.96" OLED display with 128 x 64 px resolution and yellow and blue. The screen based on the SSD1306 controller works with voltages of 3.3 V and 5 V, communicates via SPI or...
Index: WSR-04434
Index: WSR-04434
Photo Interrupter Sensor, Speed Measuring - Waveshare 12225
Digital module with optical sensor, with a gap of 6 mm. The module has a built-in comparator, because of this, the output is a digital signal. Supply voltage is from 3.3 V to 5...
Index: WSR-08834
Index: WSR-08834
RS232/RS485 converter - Ethernet - Cortex M4 - Waveshare 16530
A device allowing communication between RS232 or RS485 and Ethernet RJ45 interfaces. Module configurable via web page, AT commands, serial protocol and network protocol. It...
Index: WSR-15134
Index: WSR-15134
The module with the HAT shield for Raspberry Pi is equipped with eight HLS8L relays with a coil powered with a voltage of 5 V along with optoelectronic insulation. The system...
Index: WSR-13301
Index: WSR-13301
MQ-7 carbon monoxide sensor module - semiconductor - Waveshare 9532
Module with MQ-2 carbon monoxide sensor with the goldpin pins, pitch of 2.54 mm. It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it...
Index: WSR-05518
Index: WSR-05518
UART converter - RS485 5V - ARK/RJ11 - Waveshare 4738
Converter allows you to connect the microcontroller via the RS-485 bus which supports up to 32 devices on a line with length up to 1 km and a speed up to 10 Mbps. The module...
Index: WSR-04493
Index: WSR-04493
E-Paper Raw Panel Driver Shield - Shield for e-Paper Display for Arduino - SPI - Waveshare 15082
Universal shield for connection of displays e-Paper for modules of Arduino or Nucleo. For communication, it uses SPI interface. It works with a voltage of 3.3 V and 5 V.
Index: WSR-13460
Index: WSR-13460
RS485/CAN - Shield for Arduino - Waveshare 10771
Shield that allows you to connect the Arduino to the RS485 interface or CAN bus. It is equipped with drivers: MAX3485 and SN65HVD230 for the CAN, it works with the Uno,...
Index: WSR-04517
Index: WSR-04517
A 15.6" IPS Wasveshare capacitive touch screen with Full HD 1920 x 1080 px resolution, covered with 6H tempered glass. It communicates through HDMI and USB ports. It has a...
Index: WSR-15510
Index: WSR-15510
Distance sensor, reflective 3,3V/5V - 30mm - Waveshare 9523
The reflective module with IR sensor equipped with digital and analog output. It works with a voltage from 3 V to 5.3 V. It enbales the detection of obstacles in the range from...
Index: WSR-04459
Index: WSR-04459
Li-Ion Battery HAT for Raspberry Pi - Waveshare 15141
Panel based on the system SW6106, enables powerring the Raspberry Pi using the rechargeable Li-Ion battery 14500, which makes the device portable. The device can also be used...
Index: WSR-13459
Index: WSR-13459
RPi Relay Board (B) IC Test Board - Waveshare 15275
Shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of up to 16 servos. It communicates via I2C interface and is based on PCA9685 system.
Index: WSR-13309
Index: WSR-13309
Touch Screen B - resistive LCD 3,2'' 320x240px GPIO for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 9201
Waveshare touch screen, 3.2" resistive for Raspberry Pi with 320 x 240 px resolution. Works with Raspberry Pi in 4B, 3B+, 3B, Zero and Zero W through GPIO pins.
Index: WSR-04510
Index: WSR-04510
RTC PCF8563 I2C - real-time clock - Waveshare 3707
The module is equipped with chip PCF8563. It provides accurate and independent intervals. Operating voltage is from 1.8 V to 5.5 V. It allows you to read the time in hours,...
Index: WSR-04495
Index: WSR-04495