- New
Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
SenseCAP MeshTracker X1 - GPS LoRa Meshtastic tracker - Seeedstudio 100093876
Card-sized Meshtastic tracker: L1 + L5 GNSS, LR2021 LoRa and an IP66 case.
- Messages and position without a cellular network, range up to 8 km
- 1100 mAh battery for up to 5 days of operation
- Weight 45 g and thickness 8 mm
- Leather keychain included
We could not load the price.
The promotional price does not combine with quantity discounts.
Card-sized Meshtastic tracker
SenseCAP MeshTracker X1 is a card-sized Meshtastic tracker that sends its position over a LoRa network. It has a dual-band L1 + L5 GNSS receiver and a Semtech LR2021 radio, and its IP66 case is 8 mm thick. Messages and position reach nodes without cellular or internet.
The device weighs 45 g and measures 90 x 57 x 8 mm. You can wear it on a lanyard, clip it to a backpack or tuck it into a pocket. The built-in 1100 mAh battery can last up to 5 days, and the set includes a 20 cm USB Type-C cable and a leather keychain.
Card-sized tracker with a button and a USB-C port
L1 + L5
dual-band GNSS receiver with a barometer
IP66
dust and water protection, also in rain and mud
8 km
range in the manufacturer's open-terrain test
up to 5 days
on the built-in 1100 mAh battery
One button turns on GPS and sends your position to the network
Dual-band L1 + L5 GNSS and barometer
The GNSS receiver picks up signals in the L1 and L5 bands, and the barometer helps determine altitude. As a result, position and altitude are more reliable than with a single-band GPS.
Three clicks of the button switch the GPS on or off, and two send the node ID and position to the network. The barometer measures pressure from 300 hPa to 1100 hPa.
Semtech LR2021 LoRa radio with -141 dBm sensitivity
The Semtech LR2021 chip works in the 863 MHz to 928 MHz band with a transmit power of up to 22 dBm and a sensitivity of up to -141 dBm. In FLRC mode it transfers data at up to 2.6 Mb/s, and the manufacturer sees this as the basis for future voice and image transmission over LoRa.
In the manufacturer's test at 915 MHz in open terrain, the range reached up to 8 km. A Nordic nRF52840 chip controls it, and Bluetooth 5.0 connects the tracker to the Meshtastic app.
The tracker connects to your phone over Bluetooth 5.0
Tracker clipped to a backpack on a hike
Vibration, buzzer and an IP66 housing for the trail
The tracker signals incoming messages with a vibration from a motor with a DRV2605L driver and a buzzer sound. Four clicks of the button temporarily mute the buzzer, e.g. on a quiet trail, and in the noise of a concert the vibration helps you not to miss a message.
The IP66 case protects against dust and water, so the tracker works in rain, mud and dust. The RGB LED indicates operation, charging, full charge and low battery level.
Botland is an official distributor of electronics and robotics solutions from Seeedstudio. Hundreds of ready to use devices, components and modules are available from stock or to order. Our team guarantees that all Seeedstudio products presented here are original.
First start with the Meshtastic app
One press of the button switches the tracker on, and the start is confirmed by a melody and a green LED lit for about a second. In the Meshtastic app on an Android or iOS phone, you select the device from the Bluetooth list and enter the default code 123456.
Before the first message, set the LoRa region in the app - in Europe it is EU_868. The USB Type-C port is used for charging, firmware updates and device diagnostics.
USB-C port for charging and firmware updates
Is It the Right Choice for You?
A good choice if:
- Want to carry a Meshtastic node in a pocket, on a lanyard or on a backpack
- Need a reliable position from a dual-band L1 + L5 GNSS receiver
- Spend time in the field, where a dust- and water-resistant housing comes in handy
Consider another option if:
- Want to write messages on a touchscreen, without a phone: Wio Tracker L2 Pro
- Looking for a very lightweight locator for sharing your position: SenseCAP T1000-E
Fun Fact
Photos over a LoRa network thanks to AI compression
Seeed Studio describes sending photos from the MeshTracker X1 over a MeshCore network. A local AI model turns the photo into a very small file, and on the recipient's side another AI model reconstructs the image from it.
Source: Seeed Studio Wiki: sending photos over MeshCore (EN)
Frequently Asked Questions
Does the MeshTracker X1 work without a cellular network?
Yes. The locator sends messages and position through the LoRa network, without cellular, WiFi or internet.
How long does the battery last?
Up to 5 days on a single charge. Runtime depends on GPS settings, communication frequency and conditions.
Will the MeshTracker X1 replace a satellite communicator?
No. It communicates within a network of LoRa nodes in range, needing no subscription or satellite.
How does the MeshTracker X1 differ from the SenseCAP T1000-E?
It has dual-band GNSS, a more powerful LR2021 radio, USB-C charging, longer battery life and an IP66 housing.
Does the MeshTracker X1 work with MeshCore?
Yes. The manufacturer provides instructions for flashing MeshCore with the MeshCore Web Flasher.
How do I pair the MeshTracker X1 with a phone?
Select the tracker from the Bluetooth list in the Meshtastic app and enter the default pairing code 123456.
What's in the Box
- 1 x MeshTracker X1 with battery
- 1 x USB-C cable, 20 cm
- 1 x Leather keychain
A USB charger is not included in the kit.
Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seeed Studio |
| Manufacturer code | 100093876 |
| Type | card-sized Meshtastic GPS tracker |
| Microcontroller | Nordic nRF52840 |
| Flash memory | 8 MB |
| LoRa | Semtech LR2021, 863 MHz to 928 MHz, transmit power up to 22 dBm, sensitivity down to -141 dBm |
| FLRC mode | up to 2.6 Mb/s |
| Bluetooth | 5.0 |
| GNSS | dual-band L1 + L5 |
| Barometer | 300 hPa to 1100 hPa, resolution 0.06 Pa |
| Barometer temperature | -40 °C to 85 °C |
| Signaling | RGB LED, buzzer, vibration motor with a DRV2605L controller |
| Buttons | 1 |
| Antennas | internal: GNSS, LoRa and Bluetooth |
| Range | up to 8 km (test at 915 MHz in open terrain) |
| Battery | 1100 mAh, charge cut-off voltage 4.37 V |
| Runtime | up to 5 days |
| Charging | USB-C, 5 V / 0.55 A |
| Charging temperature | 5 °C to 45 °C |
| Ingress protection | IP66 |
| Firmware | Meshtastic, MeshCore support |
| Operating temperature | -20 °C to 60 °C |
| Certifications | CE, FCC, RoHS, TELEC |
| Dimensions | 90 x 57 x 8 mm |
| Weight | 45 g |
Useful Links
| Name | Value |
|---|---|
| Width | 12 cm |
| Height | 8 cm |
| Depth | 3 cm |
| Weight | 0.09 kg |
GLS
Shipping in 24 hours
from €8.07
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
Products from the same category
See all
