- Reduced price
- Sale
- Sale
- Sale
- Sale
- Sale
- Reduced price
- Sale
Strip LED SMD5050 IP20 14,4W, 60 LED/m, 10mm, natural white - 5m
Index: LED-07083
- Reduced price
- Sale
- Reduced price
- Sale
Raspberry Pi accessories - Strona 10
Loading...
Female goldpin strip 2x20 raster 2,54mm for Raspberry Pi - without soldering
40-pin goldpin connector strip which doesn't require soldering thanks to the clamps. It is used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm.
Index: PIM-10622
Index: PIM-10622
Connector Set - goldpin 2x20 male, female and mounting device - without soldering
Set of 40-pin goldpin connector strips which don't require soldering thanks to the clamps. They are used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm. The set...
Index: PIM-10624
Index: PIM-10624
LiPo SHIM - power supply extension for Raspberry Pi
LiPo PWM is an extension for Raspberry Pi mounted directly on the GPIO connector of the minicomputer. The device has JST 2.0 mm 2-pin connectors for connecting the...
Index: PIM-10634
Index: PIM-10634
Cytron HAT-MDD10 - two channel DC engine driver 24V / 10A - overlay for Raspberry Pi
Shield with dual-channel driver of motors operating with a voltage from 6 V to 24 V and current up to 10 A per channel (max. 30). The system can be connected directly with the...
Index: CTN-12413
Index: CTN-12413
Serial Expansion HAT - I2C, UART, GPIO for Raspberry Pi - Waveshare 15667
Shield with system SC16IS752 expanding the minicomputer Raspberry Pi with additional two communication channels of UART and GPIO ports programmable via I2C.
Index: WSR-13469
Index: WSR-13469
13.3" IPS screen with Full HD 1920 x 1080 px resolution and capacitive touch. The display communicates via HDMI and USB. It is covered with tempered glass of 6H hardness...
Index: WSR-15507
Index: WSR-15507
Case for Raspberry Pi 4B for DIN rail - Multicomp Pro - gray
Grey colour housing, designed for Raspberry Pi 4B. Made of polycarbonate , protects the entire surface of the minicomputer from damage. It is designed to be mounted on a 35...
Index: FAR-16544
Index: FAR-16544
The cap for the Raspberry Pi containing 3-axis gyroscope, accelerometer, magnetometer and a barometer, temperature and humidity sensor, the LED matrix and a small joystick. The...
Index: RPI-04585
Index: RPI-04585
RPi Relay Board - 3 relays - cap for Raspberry Pi - Waveshare 11638
Cap fitted to connectors of Raspberry Pi GPIO in version 4B, 3B+, 3B, 2B, B+ and A+, with three relays with parameters of 250 V / 10 A. Board has a screw connector....
Index: WSR-06804
Index: WSR-06804
OdSeven Camera HD IR-CUT OV5647 5Mpx - day/night IR for Raspberry Pi + IR modules
Module with the camera, connected to a dedicated connector of minicomputer Raspberry Pi, version 4, 3, 2, B+, A+. It has a matrix CCD 1/4" with the resolution of 5 Mpx,...
Index: ODS-07599
Index: ODS-07599
Case for Raspberry Pi 4B/3B+/3B/2B - transparent open
Simple, transparent, open case for Raspberry Pi minicomputer in versions 4B, 3B+, 3B, 2B and 1B+ with external dimensions 90 x 60 x 34 mm . It has no side walls. The kit...
Index: RPI-08303
Index: RPI-08303
RGB LED Hat for Raspberry Pi 3/2/Zero - Waveshare 12725
Shield for the Raspberry Pi containing the LED matrix 8 x 4 consisting of WS2812B LEDs. Each LED can be individually set. The device has dimensions of 65 x 30 mm, it works with...
Index: WSR-08869
Index: WSR-08869
Raspberry Pi Zero Case - Fluo Open - transparent
Transparent case for minicomputer Raspberry Pi Zero with external dimensions 65 x 30 x 15 mm.
Index: RPI-08907
Index: RPI-08907
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
Camera HD G camera OV5647 5Mpx - wide-angle - for Raspberry Pi - Waveshare 14037
The module with a wide-angle camera (200° ) is connected to the dedicated Raspberry Pi mini-computer connector in 4B, 3B+, 3B, 2B, B+, A+ and older A and B versions. The...
Index: WSR-15130
Index: WSR-15130
Pirate Audio 3W Stereo Amp - 3W amplifier with display - AMP for Raspberry Pi - Pimoroni PIM484
Overlay with two DAC chips for the Raspberry Pi minicomputer. The board is equipped with a 3 W stereo audio output , two speaker terminals and a 1.3 " colour IPS display ....
Index: PIM-15898
Index: PIM-15898
Touch screen - resistive LCD TFT 3.5 '' 320x240px for Raspberry Pi 4B/3B+/3B - SPI GPIO
Touch screen TFT LCD with a screen diagonal of 3.5 " and resolutions 320 x 480 px . Communication between the minicomputer and the display is done via...
Index: DNG-16726
Index: DNG-16726
CS Mount lens 16mm - manual focus - for Raspberry Pi camera - Arducam LN050
The lens cooperates with official Raspberry Pi HQ camera and ArduCam cameras from Sony IMX477/577 series . It is equipped with 16 mm focal length, manual focus and...
Index: ACM-17062
Index: ACM-17062
Audio Amp SHIM - 3W Mono Amplifier for Raspberry Pi - Pimoroni PIM541
A small SHIM overlay for Raspberry Pi minicomputers made by Pimoroni company. The module acts as a 3 W mono amplifier. There is a terminal connector on the board to connect...
Index: PIM-19067
Index: PIM-19067
SIM868 GSM/GPRS/GNSS + Bluetooth - communication module for Raspberry Pi Pico - Waveshare 20268
CAN FD Expansion HAT is a CAN bus expansion overlay produced by Waveshare. It supports the original CAN 2.0 protocol and the CAN FD expansion with higher data throughput....
Index: WSR-20081
Index: WSR-20081
Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4
Expander of pins in the form of an overlay for the Raspberry Pi Compute Module 4 Lite / eMMC computing module . It has been equipped with special connectors, thanks to...
Index: WSR-21612
Index: WSR-21612
Camera interface extension kit for Raspberry Pi - ArduCam U6248
The extension kit allows you to replace the FPC ribbon with an Ethernet LAN cable. With its help, you can significantly increase the length of the cable and place the camera...
Index: ACM-21685
Index: ACM-21685
PCF8575 - GPIO pin expander - I2C - STEMMA QT / Qwiic - Adafruit 5611
Adafruit pin expander equipped with PCF8575 chip. It has as many as 16 pins of GPIO inputs / outputs , thanks to which it increases the design possibilities of the modules...
Index: ADA-22192
Index: ADA-22192
PiCowbell Proto - prototype board for Raspberry Pi Pico - reset button - STEMMA QT - Adafruit 5200
PiCowbell Proto is an extension designed for Raspberry Pi in the Pico version, which enables prototyping of the module and allows you to create electronic circuits yourself....
Index: ADA-22390
Index: ADA-22390