- New
- Reduced price
- Sale
Qwiic 5V Boost - 5V step-up converter - AP3012K - SparkFun PRT-28203
Index: SPF-26595
- Reduced price
- Sale
GPS NEO-M9N module - built-in antenna - Qwiic - SparkFun GPS-15733
Index: SPF-18450
- Reduced price
- Sale
ELECTRONICS - Strona 133
Loading...
Set of lenses for Arducam cameras - M12 mount
A set of ten lenses for cameras from Arducam equipped with M12 mounting. Range of horizontal viewing angle of lens is from 10° to 200°.
Index: ACM-13604
Index: ACM-13604
TB67S249FTG - Stepper Motor Driver 47V/1,6A with headers - Pololu 3097
Stepper motor driver based on the chip TB67S279FTG. Powered by a voltage range of 10 - 47 V, with a maximum current consumption of 4.5 A per coil. Maximum resolution: 1 /...
Index: PLL-13680
Index: PLL-13680
Large Arcade Button with LED - 60mm Red with lightning
Big button with an outer diameter equal to 6 cm with built-in red LED.
Index: ODS-13772
Index: ODS-13772
PiMoroni IS31FL3731 - Matrix LED RGB 5x5 I2C
A module with a matrix of 5 x 5 LED RGB, based on the system IS31FL3731. Communicates via an I2C bus, allowing for work with Raspberry Pi and Arduino. Powered by voltage of 3.3...
Index: PIM-13857
Index: PIM-13857
ADXL343 QT 3-axis I2C / SPI digital accelerator - module - Adafruit 4097
Sensor for measuring acceleration in three axes in the range of +-2g/4g/8g/16g. The module is supplied with the voltage from 2 V to 3.6 V, the voltage regulator is...
Index: ADA-13948
Index: ADA-13948
ADT7410 - High Accuracy I2C Temperature Sensor Breakout Board - Adafruit 4089
Adafruit temperature sensor with high accuracy with digital thermometer ADT7410 in the range of -40°C to +105°C equipped with interface I 2 C (TWI). The supply voltage ranges...
Index: ADA-13951
Index: ADA-13951
Tic T249 - USB stepper motor driver 47V/4,5A - assembled - Pololu 3138
Stepper motor driver based on TB67S249FTG chip. Powered by a voltage range of 10 - 47 V, with a maximum current consumption of 4,5 A per coil. Maximum resolution: 1/32 of a...
Index: PLL-13959
Index: PLL-13959
Index: KAB-14017
RFID Qwiic Reader - SparkFun SEN-15191
Easy to use RFID reader module is equipped with Qwiic connectors based on the I2C interface. It works with systems series ID-3LA, ID-12LA and ID-20LA. The board allows you to...
Index: SPF-14072
Index: SPF-14072
- Sale
- SPECIAL OFFERS
Touch screen - resistive LCD 5'' 800x480px HDMI + GPIO for Raspberry Pi
Touch screen, resistive 5" for Raspberry Pi with 800 x 480 px resolution. Works with Raspberry Pi in 4B, 3B+, 3, 2, B+, Zero and Zero W via GPIO pins.
Index: OST-14251
Index: OST-14251
Distance sensor, reflective 3,3V/5V - Iduino ST1140
The module is equipped with IR reflective sensor equipped with digital output. It works with a supply voltage from 3.3 V to 5 V. It is applied in the robots tracking the line.
Index: OST-14274
Index: OST-14274
IR receiver + wire - Iduino SE027
Simple Iduino module with IR receiver, operating at a frequency of 38 kHz. The module is powered with the voltage of 5 V. It detects a beam at an angle of 90°. Maximum...
Index: OST-14283
Index: OST-14283
Simple module with the button of tact switch type. When the button is pressed, at the output is a high level signal. It is powered with the voltage of 5 V.
Index: OST-14285
Index: OST-14285
Sound sensor - microphone - Iduino ST1146
The sound detector with a small microphone, a voltage supply range from 3.3 V to 5 V. T he module is easy to use, has two outputs: an analog - to measure the intensity of the...
Index: OST-14287
Index: OST-14287
Module with LM35 temperature sensor
The module with analog temperature sensor LM35 . Powered with the voltage of the 5 V. It can read the temperature in the range from -55°C to 150°C with the accuracy of up to...
Index: OST-14288
Index: OST-14288
Module with Hall sensor - Iduino SE014
The module with the Hall sensor, the detection range of the magnetic field is regulated with the potentiometer. It has a built-in digital and analog connector. Powered with the...
Index: OST-14293
Index: OST-14293
Relay module 1 channel - 3A/250VAC contacts - 5V coil
The module is equipped with HK4100F relay with the voltage of 5 V. T he system allows you to control the actuators with a voltage of 250 V AC / 30 V DC , using the ports...
Index: OST-14297
Index: OST-14297
Module with photoresistor + cable - analog - Iduino ST1107
Module with photoresistor for Arduino. It can be used to measure the intensity of light. It is controlled via an analog signal, is powered with the voltage of 5 V. The set...
Index: OST-14301
Index: OST-14301
Module with real time clock DS1302 RTC. It allows you to read the time in hours, minutes, and seconds, date: day, month, year. Communicates via I/O interface.
Index: OST-14303
Index: OST-14303
Slide linear potentiometer. Equipped with two 3-pin connectors. The supply voltage is 5 V.
Index: OST-14312
Index: OST-14312
Temperature sensor - thermistor NTC-MF52 - Iduino ST1147
Module with temperature sensor equipped with a thermistor NTC-MF52. In order to read values from the sensor, connect it to the analog signal of the microcontroller. It detects...
Index: OST-14322
Index: OST-14322
2mm slit sensor - Iduino SE056
Digital module with optical sensor with a slit of 2 mm. The output is a digital signal. The supply voltage is 5 V. With the encoder's shield, it can be used as a device...
Index: OST-14323
Index: OST-14323
Magnetic Field Hall sensor - Iduino SE054
Module with Hall sensor, digital magnetic switch. Enables detection of a magnetic field. Operates with a voltage of 5 V.
Index: OST-14326
Index: OST-14326
Ultrasonic distance sensor 2-400cm - HY-SRF05
Ultrasonic sensor operating in the range from 2 cm to 400 cm. It is powered with voltage of 5 V. The output is a signal, duration of which is proportional to the measured...
Index: OST-14329
Index: OST-14329