Heatsink with fan - for Odyssey-X86J4105 - Seeedstudio 114070141
Index: SEE-18808
- Reduced price
- Sale
- Sale
- Sale
ELECTRONICS - Strona 134
Loading...
Laser diode 5mW red 650nm 5V - module Iduino ST1172
Module with diode laser emitting light in red. Power equal to 5 MW. Voltage supply 5 V.
Index: MOD-08242
Index: MOD-08242
A set of 200 resistors with the 1 W power. Elements are in the through hole THT case.
Index: PAS-08278
Index: PAS-08278
Grove - UV sensor - analog module
UV sensor with voltage supply from 3.3 V to 5 V. Output analog voltage, proportional to the intensity of UV radiation. The sensor can be used to detect harmful solar radiation.
Index: SEE-08307
Index: SEE-08307
DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.
Index: DFR-08367
Index: DFR-08367
Angled DC adapter 5.5/2.1mm - angular
The angled adapter making possible the connection of the cable to the 5.5 / 2.1 mm tip everywhere, where the straight adapter just doesn't fit. It can be used as a power source...
Index: SWT-08431
Index: SWT-08431
ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier STEMMA QT/Qwiic- Adafruit 1085
Module with analog to digital converter with 16-bit precision. Running at a speed of up to 860 samples per second. It has the ability to change the amplification of up to 16 x....
Index: ADA-08444
Index: ADA-08444
The module is equipped with relay SRD-5VDC-SL-C with coil powered with a voltage of 5 V. T he systems allows you to control actuators with microcontroller ports or with any...
Index: MOD-08463
Index: MOD-08463
2-pin straight connector for soldering to PCB. Used for example to connect male wires. Raster is equal to 2.54 mm. Socket is sold in pack of 10 pieces.
Index: UCC-08501
Index: UCC-08501
3-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm.
Index: UCC-08502
Index: UCC-08502
Socket 1x16pin - 2,54mm - 10pcs
16-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm. Items are sold in sets of 5 pieces.
Index: UCC-08504
Index: UCC-08504
20-pin straight connector for soldering to PCB. Used for example to connect male wires. Raster is 2.54 mm .
Index: UCC-08505
Index: UCC-08505
Socket 1x20pin - 2,54mm long - 5pcs.
20-pin straight connector for soldering to PCB. Used for example to connect male wires. Raster is 2.54 mm. It has extended pins length of 10.5 mm. Price per 5 pcs .
Index: UCC-08512
Index: UCC-08512
Sealed cable gland - M16 - gray - 5pcs.
Hermetic conduit with 16 mm thread. Prevents the wire passing through, e.g. through the casing wall. Suitable for cables with a diameter of 5 mm to 8 mm.
Index: KAB-08514
Index: KAB-08514
Linear voltage regulator 5V L78M05CDT - SMD TO252 - 5pcs.
The stabilizer is used to supply power to logic circuits supplied with 5 V. Maximum output current is 0,5 A. Housing: TO252 (DPAK).
Index: UCC-08556
Index: UCC-08556
Compact Optical Dust Sensor GP2Y1010AU0F
Sensor of dust that allows you to monitor the purity of the air. It is equipped with a sensor with a sensitivity of 0.5 V 0.1 mg/m3, for example, cigarette smoke. The system is...
Index: SEN-08587
Index: SEN-08587
DFRobot Gravity: Formaldehyde (HCHO) Sensor (Arduino & Raspberry Pi Compatible)
The sensor measures the air clarity, depending on the content of formaldehyde. It is characterized by its high stability and sensitivity and long service life. It works with...
Index: DFR-08605
Index: DFR-08605
RGB LED Strip WS2813 - digital, addressed - 14 LED/m, 43.2W/m, 5V - 1m, IP30
Individually addressed RGB LEDs placed on a 1 m panel with a density of 144 LEDs per meter. Each pixel can emit a color from 24-bit palette.
Index: LED-08737
Index: LED-08737
ON-OFF-ON KN3 (B) -123 250V / 6A toggle switch - monostable
Switch with lever for printing with 3 contact with the load of 6 A / 250 V or 10 A / 125 V. It has 3 positions in configuration ON-OFF-ON. Pins pitch is 12.5 mm, total...
Index: NSZ-08827
Index: NSZ-08827
LED indicator 12V DC - 8mm - red
LED light, working voltage 12 V DC. It has a diameter of 8 mm.
Index: LED-08984
Index: LED-08984
LED indicator 12V DC - 12mm - green
LED light, working voltage 12 V DC. It has a diameter of 12 mm.
Index: LED-08996
Index: LED-08996
Workshop flashlight everActive WL-200
Flashlight equipped with a modern COB LED 3 W with a luminous flux of 200 lm. Made of durable aluminum, has two strong neodymium magnets and a clip for convenient fixing of the...
Index: NSZ-09068
Index: NSZ-09068
Inveo LanTick Pro PE-2-2 - IoT relay module
Inveo modules allow remote control of devices via Internet. It has 2 relay outputs of 250V and 2 binary inputs operating in counter mode. The module is controlled through the...
Index: INV-09117
Index: INV-09117
Inveo Nano RFID - IoT module for reading RFID Unique
Inveo module that enables reading of transponders in Unique standard via Internet. It was created with the aim of integrating with the client's software. Supply voltage from...
Index: INV-09122
Index: INV-09122
Ampgenol FCI Clincher connector - female 2x - SparkFun COM-14195
Connectors can be used to close thin, flexible FFC cables, for example, force sensors and pressure sensor.
Index: SPF-09140
Index: SPF-09140