ELECTRONICS - Strona 161
STM32L053 - Discovery Kit - STM32L053DISCOVERY Cortex M0 + E-paper 2,13 '' screen
Development set built on the basis STM32L053C8T6 Low Power microcontroller with parameters: clock frequency: 32 MHz, 64 kB Flash, 8 kB RAM, ARM Cortex M0). The board also has...DFRobot 3D Gesture Sensor (Mini) For Arduino
Interactive sensor that can recognize gestures in 3D and also track the motion. Supply voltage is from 3.3 V to 5 V, and the detection range is around 5 cm.DFRobot converter USB-UART FTDI FT232RL 3.3V/5V microUSB
Converter enables the communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The...DFRobot - kit for ultrasonic scanner 120°/400cm - URM37 sensor + servo
Kit for self-assembly enabling the addition of ultrasonic scanner function to robot. The sensor is able to scan an area of 120 ° in the range from 10 cm to 400 cm. It consists...Inveo LanTick Pro PE-2-2 - IoT relay module
Inveo modules allow remote control of devices via Internet. It has 2 relay outputs of 250V and 2 binary inputs operating in counter mode. The module is controlled through the...Inveo LanTick Pro PE-4-4 - IoT relay module
Inveo modules allow remote control of devices via Internet. It has 4 relay outputs of 250V and 4 digital inputs operating. The module is controlled through the built-in WEB...Inveo LanTick Pro PE-8-0 - IoT relay module
Inveo modules allows remote control of devices via Internet. It has 8 relay outputs of 250V and a built-in WEB server. It is adapted for mounting on a DIN rail.Inveo Nano OUT - IoT module with relay
Inveo modules allow remote control of a device via the Internet. It has 1 relay output of 250 V and a built-in WEB server.Inveo Nano RFID - IoT module for reading RFID Unique
Inveo module that enables reading of transponders in Unique standard via Internet. It was created with the aim of integrating with the client's software. Supply voltage from...LED matrix 24x8 FireBeetle Cover - red
The matrix consists of 192 individually addressed red LEDs, arranged in 8 rows and 24 columns. The matrix was developed for the DFRobot FireBeetle series, it is also compatible...Realtek Ameba RTL8195AM - WiFi + NFC module
The module is equipped with a microcontroller with the core of 32-bit ARM Cortex M3 MCU, allows you to connect to wi-fi and NFC. The system has GPIO connectors, popular...FireBeetle DFRobot ATmega328P - BLE4.1
The board allows to extend the Arduino with the Bluetooth module. It is equipped with the ATmega328P processor and Bluetooth BLE 4.1. It offers functions similar to Bluno...Gravity DFRobot IO Expansion + TB6612FNG 2-channel motor driver 12V/1.2 A - Shield for Arduino
Shield for Arduino which is an extension of the i/O pins and two-channel driver for DC motors TB6612FNG with a voltage of 12 V and performance of 1.2 A per channel. It also has...DFRobot FireBeetle LoRa 433MHz
The FireBeetle module compatible with Arduino, equipped with LoRa SX127x 433 MHz module with built-in PA (Power Amplifier), controlling is through SPI interface. It is used for...DFRobot Gravity - IO Expansion Shield for LattePanda
Shield for minicomputer LattePanda of Gravity And/O all GPIO pins that are compatible with standard Arduino and does not interfere with other LattePanda outputs. Every...DFRobot Gravity - analog temperature sensor LM35
Analog LM35 sensor working with Arduino and Raspberry Pi. It is powered with the voltage from 3.3 V to 5 V. it can measure temperature in the range from 0 ℃ to 100 ℃. The...ArduCam Camera Sony IMX219 8MPx - for Raspberry Pi - Rev.C
Camera module with Sony IMX219 sensor equipped with LS-40136 lens, with parameters: focal length 3.2 mm, angle 85°, iris 2.0, 1/4" format. Connected to dedicated connector...DFRobot Gravity - flame sensor 760-1100nm
The sensor is used to detect fire. It is powered with the voltage from 3.3 V to 5.3 V. The range of the sensed wave: from 760 nm to 1100 nm. The output is an analog voltage....DFRobot Gravity - grayscale sensor
Analog grey sensor which is able to measure the light intensity from black to white. Scale of gray is also defined as black and white, with the darkest shade of gray as black...DFRobot Gravity - 2x16 I2C LCD display - green
LCD display 2x16 characters with backlight in green. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.DFRobot Gravity: digital signal isolator IB05_XT-W75R3 I2C
Digital isolator of signal I2C ffrom series Gravity. It protects the sensors from electrical interferences causing a read error through the isolation of I2C signal and...Rangefinder - TF03 LiDAR sensorIP67 - 180m - UART, CAN
Accurate laser distance sensor operating in the range from 0.1 to 180 m with an accuracy of 0.1 m. The supply voltage is 5 V. The device communicates using the UART, CAN,...Arduino Ethernet Shield ASX00006 MKR - Shield for Arduino MKR
Shield for Arduino MKR enabling the connection to the Ethernet network . It is equipped with a system W5500 and a connector for microSD cards. It c ommunicates via the SPI...
