Filament Rosa3D Refill PLA Magic Silk 1,75mm 1kg - Gold-Silver
Index: ROS-24206
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Minicomputer UP 4000 8GB RAM + 64GB eMMC Intel Pentium N4200
Index: AAE-24032
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
ELECTRONICS - Strona 23
Loading...
Big button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-10940
Index: DNG-10940
BME280 - humidity, temperature and pressure sensor 110 kPa I2C / SPI - 3.3V - soldered connectors
Very easy to use temperature, humidity and pressure sensor. The module is powered by 3.3 V and can also communicate via I2C or SPI interface . Sensors of this type are...
Index: ZES-16534
Index: ZES-16534
A compact development board manufactured by Seeedstudio, equipped with the efficient Nordic nRF52840 ARM Cortex M4 chip with a clock speed of 64 MHz. The board is equipped...
Index: SEE-21259
Index: SEE-21259
Infrared receiver TSOP2236 - 36 kHz
IR receiver TSOP2236, it is operating at a frequency of 36 kHz with a voltage from 4.5 V to 5.5 V.
Index: SES-00181
Index: SES-00181
Socket for SD memory card with SD238 ejector
Connector - socket for SD memory card with ejector.
Index: PAS-01113
Index: PAS-01113
Assembly bar female 4-pin, raster 3,5mm
Seperable terminal block, female, 4-pin. Pitch is 3.5 mm. Height is 11.3 mm. Screw on the flat screwdriver (-).
Index: KAB-08406
Index: KAB-08406
ON-OFF switch monostable - PBW-12B - 2A 250V
Projecting monostable switch with contact rating of 2 A for 250 V.
Index: NSZ-09794
Index: NSZ-09794
Qwiic female-female cable with 4-pin plug - 5cm - SparkFun PRT-14426
4-pin cable with the length of 5 cm. It is ended on both sides with a JST Qwiic 4-pin plug, pitch of 1 mm.
Index: SPF-10108
Index: SPF-10108
Grove - 4-pin screw connection
Module from the Grove series with a 4-pin screw connection of 3.5 mm. It is designed to connect the cables with diameter from 0.2 mm to 0.8 mm for the microcontroller. It has...
Index: SEE-11348
Index: SEE-11348
Extension slot for memory cards microSD - 65cm
Extension slot for memory cards microSD, e.g. for Raspberry Pi with a tape with a length of 65 cm.
Index: DNG-12290
Index: DNG-12290
PVC wire 0.25mm AWG30 - 8 colors - roll 250m
PVC cable wrapped on a roll. Used e.g. for alarm and intercom systems. Length equal to 250m . The subject of the sale is a roll of 8 cables in various colours ..
Index: GRL-12584
Index: GRL-12584
SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1m - Adafruit 4099
Temperature and humidity sensor equipped with a weatherproof metal mesh and a 1 m long cable. The measuring range for temperature is from -40 °C to 125 °C, for humidity from 0...
Index: ADA-14969
Index: ADA-14969
Heatsink 40x30x5mm for Raspberry Pi 4 with thermoconductive tape - red
Aluminium heat sink in red, dimensions 40 x 30 x 5 mm. It is a mounting element, fully compatible with the Raspberry Pi 4 minicomputer, as well as with other electronic...
Index: ODS-15698
Index: ODS-15698
MiniUSB B - A cable 2.0 Lanberg 1,8m - black
High quality miniUSB 2.0 cable in black, Lanberg brand, will prove its worth using it, among others, in connection between a computer and a digital camera or MP3 player. The...
Index: IMP-15795
Index: IMP-15795
IR beam interruption sensor - LED 3mm - 0-25 cm
The sensor reacts to an interruption in the beam of infrared light that is transmitted between the transmitter and receiver. The module is equipped with a 3 mm IR LED with...
Index: DNG-18687
Index: DNG-18687
JustPi THT CF carbon resistor 1/4W 1,5Ω - 30pcs.
The set consists of 30 resistors. The elements are designed for THT through-hole mounting. Resistance is 1.5 Ω and tolerance is 5%.
Index: JUS-20007
Index: JUS-20007
Limit switch mini - WK601 - 5 pcs
Limit switch with lever. Maximum operating parameters: voltage of 250 V and current of 5 A. 5 pcs.
Index: PAS-00927
Index: PAS-00927
Female socket 1x8 raster 2,54mm for Arduino - 5pcs
8-pin female strap used in the Arduino Uno and Leonardo. Pins' pitch: 2.54 mm. Price for 5 pcs of female strap.
Index: UCC-01992
Index: UCC-01992
STM32 NUCLEO-F303RE - STM32F303RET6 ARM Cortex M4
Module with 32-bit microcontroller with ARM Cortex M4, 72 MHz, 512 KB of Flash, 80 KB of SRAM. Nucleo is compatible with the mbed platform, it has connectors for connecting the...
Index: DIS-03702
Index: DIS-03702
Module with USB type A connector
The connector allows you to connect a USB A plug to any circuit . Pinout is matched to standard pinout boards and connection wires available in our shop.
Index: MOD-03726
Index: MOD-03726
Bipolar transistor NPN Darlington MPSA29 100V/0.8A
Bipolar transistor NPN, 100 V, 800 mA. Pinout: ECB. Price for 1 piece.
Index: UCC-05023
Index: UCC-05023
Assembly bar female 10-pin, raster 5,08mm, steel
Seperable terminal block, female, 10-pin. Pitch of 5.08 mm. Height is 15.1 mm. Screw on the flat screwdriver (-).
Index: KAB-07117
Index: KAB-07117
Humidity Sensor SYH-2R - no case
Analog air humidity sensor changes the resistance depending on the humidity level. It operates in the range from 10 % to 95 % RH. The module has no case.
Index: MOD-08089
Index: MOD-08089
Tact Switch 12x12, 11mm THT 4pin - black - 5pcs
A small monostable button mounted in a through-hole way - THT with four pins with the size: 12x12 mm, height: 11 mm. The button is in black color. 5 pcs.
Index: AKS-10251
Index: AKS-10251