ELECTRONICS - Strona 67
Quick couplings UY 4CI-2006 - 5pcs
Quick connectors are used to connect two veins of the cables with a diameter of 0.5 mm. Gel-filled for protection from corrosion and moisture. Price for 5 pieces.Markers kit for 4mm cables - 100pcs
Kit for marking cables with diameters up to 4 mm. Contains 10 markers each with numbers from 0 to 9 in different colours.Linear voltage regulator kit - 5V-24V TO220 - 14pcs
Set of 14 popular regulators in TO220 housing.LED strip driver - Mini - 11 keys
The module allows you to control the brightness of a single-color LED strip. It is equipped with a DC 5.5 / 2.1 mm power connector and a remote control.Controller L9110 with DC motor and fan
Fan made of plastic with a DC motor and the control unit of the direction of rotation based on the system L9110 with digital outputs. It has the ability to blow out the flame...Ceramic capacitor 470pF/50V - 1000 pcs.
Through hole ceramic capacitor of 470 pF / 50 V. Price for 1000 pieces.- Reduced price
- SPECIAL OFFERS
LED indicator 12V AC/DC - 28mm - white
LED light, operating voltage 12 V AC/DC. It has a diameter of 28 mm.LED indicator 230V AC - 28mm - yellow
LED light, operating voltage 230 V AC. It has a diameter of 28 mm.Reed switch normally - plastic 14,5mm
Reed contact in plastic straight housing, 14.5 mm long.Safety switch ON-OFF mushroom - 40mm
The "mushroom" safety switch with a loading capacity of contacts: 10 A for 440 V.FlexiForce Pressure Sensor - 25lbs. (1" area) - SparkFun SEN-11207
Pressure sensor reduces its resistance when the force put to the round tip, increases. The round sensor with a diameter of 25.4 mm, the maximum pressure is 11 kg.SanDisk Ultra Fit - memery USB 3.2 pendrive 32GB
USB 3.2 Ultra Flair memory from SanDisk with capacity of 32 GB. It is equipped with a small case. The device has a 5 years warranty.Blinkt! 8x adressed LED RGB - Raspberry Pi extension
Blinkt! is a shield for the Raspberry Pi mounted on GPIO connector of the minicomputer. Board has eight individually addressed RGB LEDs, ideal for adding a visual notification...ON-OFF switch monostable - PBW-12BPW - 2A / 250V - red
A salient, monostable switch with the red backlight. Contact load is 2 A for 250 V.Limit switch with lever - WK611 - 5pcs.
Limit switch with lever with the length of 25 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.Limit switch mini curved - WK622 - 5 pcs.
Limit switch with lever with the length of 19 mm. Maximum working parameters are the AC voltage of 250 V and current of 3 A.DFRobot Gravity - 12-position rotary switch V1
The module is equipped with 12-state rotary switch. It is powered with the voltage from 3.3 V to 12 V. The switch uses analog input for reading the output status, which allows...DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...Grove - Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used, for example, in game controllers. It has the possibility of detecting movement in two directions and the...Lever switch ON-OFF 12V / 20A backlit - green - Adafruit 3307
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a green backlight.Lever switch ON-OFF 12V / 20A backlit - red - Adafruit 3218
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a red backlight.BleBox AirSensor - wireless PM10 and PM2.5 air quality sensor
Complete module for detecting the presence of harmful dust inside the house as well as outdoors. It detects PM10 and PM2.5 dust. It can be supplied with voltage from 12V to 24V...Connecting cables female-female 20cm green - 100pcs
Set of 100 copper connection cables 26AWG with a length of 20 cm in green color.
