- Reduced price
- Promotion
- Reduced price
- Promotion
M5Stamp Timer Power - Power Control Module - BM8563 - M5Stack S005
Index: MSS-22675
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
ON-OFF switch monostable - PBW-16BPW - 2A 250V - green / red
Index: AKS-10821
- Reduced price
- Promotion
DRV8801 - single-channel motor controller 36V / 1A - Pololu 2136
Index: PLL-01256
- On sale!
- Promotion
Grove modules - Strona 3
Loading...
Connector Grove to GROVE - 5pcs
The connector Grove to Grove is an extension module of the standard Grove connector. It has a female Grove port (socket) on both ends. It is used to extend the...
Index: MSS-18101
Index: MSS-18101
Grove - WS2813 RGB LED Strip Waterproof - 60 LED/m - 1m
Waterproof RGB LED strip powered by 5 volt with replaceable silicone case. It consumes a power of 18 W/m, density is 60 diodes per meter. LEDs can also emit cool white light,...
Index: SEE-13666
Index: SEE-13666
- Reduced price
- Promotion
Grove - vibration motor + module
The module contains a miniature DC vibrating motor. It is very easy to use and is equipped with Grove interface which makes it easy to connect it with Arduino and Raspberry Pi.
Index: SEE-11361
Index: SEE-11361
The Grove module is used to atomize water. It works with a voltage of 5 V. It can be used, among other things, as a humidifier but also allows for more advanced projects where...
Index: SEE-11362
Index: SEE-11362
Grove - Button - module with a button
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.
Index: SEE-11297
Index: SEE-11297
Grove - Shield for Seeeduino XIAO - Seeedstudio 103020312
Overlay for Seeeduino Xiao , extending the capabilities of pins I / 0. Provides compatibility of the module with Grove series sensors. It has 8 built-in Grove connectors,...
Index: SEE-17041
Index: SEE-17041
A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with modules of Arduino and Raspberry.
Index: SEE-11358
Index: SEE-11358
Grove - Mega Shield v1.2 - Arduino Shield
The overlay for Arduino Mega extends the capabilities of I/O pins. Adapted to the modules and sensors of the Grove series. It is equipped with 4-pin Grove connectors, as well...
Index: SEE-15263
Index: SEE-15263
Grove - air purity sensor MP503 v1.3
Air purity sensor from Groveseries. It is used for detecting slightly toxic gases such as carbon monoxide, alcohol, acetone, thinner, formaldehyde and other.
Index: SEE-04415
Index: SEE-04415
Grove - Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used, for example, in game controllers. It has the possibility of detecting movement in two directions and the...
Index: SEE-11357
Index: SEE-11357
Module from the Grove series, based on the system LM2904 and a microphone. It can be powered with a voltage ranging from 3.5 V to 10 V. The output is the analog signal. The...
Index: SEE-11332
Index: SEE-11332
- Reduced price
- Promotion
Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...
Index: SEE-04396
Index: SEE-04396
Grove - I2C hub - 8 ports - TCA9548A - Seeedstudio 103020293
Splitter allowing to extend the number of I2C ports in the main module by another 8 pieces. The Hub is equipped with TCA9548A chip, which allows to connect 8 modules with the...
Index: SEE-16092
Index: SEE-16092
Module with blue LED, fitted with Grove connectors is ideal for working with Arduino. The LED turns on, when the signal pin goes into high state. In addition, on the board...
Index: SEE-11296
Index: SEE-11296
Grove - MMA7660FC 3-axis digital accelerometer I2C
Module with 3-axis accelerometer based on MMA7660FC chip with digital I2C output and Grove connector. The MEMS sensor has a low power consumption and low profile. The module...
Index: SEE-15444
Index: SEE-15444
- Reduced price
- Promotion
Grove Inventor Kit for micro:bit
The Grove Inventor Kit for micro: bit provides endless possibilities for development boards from BBC. The most important element of the set is a Grove shield for micro: bit...
Index: SEE-13819
Index: SEE-13819
Grove - SHT35 - temperature and humidity sensor - I2C
Highly accurate SHT35 temperature and humidity sensor. It measures temperature from -40°C to 125°C with an accuracy of 0.1°C and humidity from 0% to 100% RH with an accuracy of...
Index: SEE-15182
Index: SEE-15182
Grove - module cover 1x2 blue - 4pcs.
Shield for the modules from Grove series in green color with size of 50 x 25 x 13 mm. It is also compatible with Lego and Makeblock. Allows you to mount two small or one large...
Index: SEE-13342
Index: SEE-13342
Grove - temperature and humidity sensor DHT22 (AM2302)
Module with temperature and humidity sensor with a digital single-wire interface. Measuring range: temperature -40 °C to +80 °C, humidity is from 0% to 100 % RH.
Index: SEE-13334
Index: SEE-13334
Grove RS-485 module allows to connect Arduino to RS-485 bus. Easy to use plug and play device. The module features high stability and supports 500 kB/s error free...
Index: SEE-14130
Index: SEE-14130
Grove AHT20 - temperature and humidity sensor - I2C - - Seeedstudio 101990644
The Grove AHT20 is a new generation sensor, enabling even more accurate measurements. The AHT20 has a newly designed ASIC with an improved MEMS semiconductor moisture...
Index: SEE-16595
Index: SEE-16595
433 MHz RFM95 radio module of the long range (Long Range: LoRa). It allows for data transmission at the distance of up to 500 m using a piece of wire as an antenna. It a lso...
Index: SEE-09086
Index: SEE-09086
Grove - 10kΩ linear sliding potentiometer
Sliding linear potentiometer with a resistance of 10 ohms. Itas a 4-pin Grove connector. The kit includes a cable adapted to Seeedstudio Base Shield v2.0.
Index: SEE-04436
Index: SEE-04436
Grove - Grove-4pin - BLS connector - extension from M5Stack - 10pcs.
The module has a Grove type connector on one side and a 4-pin connector with a 2.54 mm pitch on the other side. It is used as an auxiliary element when some sensors of...
Index: MSS-19421
Index: MSS-19421
See also
- Twilight sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Oxygen sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Led motion detectors
- Optical sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Limit switches
- Sensors of light and color
- Gas sensors
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Gravity modules