Description: Li-Pol Akyga 1200 mAh 1S 3.7 V Li-Pol Akyga battery - JST-BEC connector + socket - 40 x 30 x 10 mm.
The Akyga battery is made of lithium-polymer cells. Rated voltage of 3.7 Vandcapacity of 1200 mAhcombined with smalldimensions and low weight allow to use the battery in toys, GPS systems, MP3 players, as well as in medical sensors and smart clothes. A 150mmlong power cablewitha femaleJST connectorwith a 2.54 mm leadrasterhas been lead out of the battery. A connector to the JST connector was included in the set. The battery alsofeatureshigh energy density and slow self-discharge, which is extremely important.
Li-Pol Akyga 1200 mAh 1S 3.7 V Li-Pol Akyga battery - JST-BEC connector + socket - 40 x 30 x 10 mm.
Li-Pol battery specifications
- Battery type: lithium-polymer
-
Rated voltage: 3,7 V
-
Capacity: 1200 mAh
-
Operating temperature range: -20°C to 45°C
-
Power cable length: 150 mm
-
Connector type: Female 2-pin
-
Nominal charge/discharge current: 0.2 C (0.24 A) / 0.2 C
-
Maximum charge/discharge current: 1 C (1,2 A) / 1 C
-
Raster of exits: 2.54 mm
- Security: PCM
-
Dimensions: 40 x 30 x 10 mm
Important!
Lithium-polymer batteries should be charged using specially designed chargers. It is very important not to open or dispose of used batteries together with mixed waste - you can take them to a disposal point or to any shop collecting electro-waste. Moreover, it should be remembered that the use of mechanically damaged batteries and those with electrolyte leakage is highly dangerous to health and life.
|
NOTE! Before use it is necessary to read |
