Product description: Camera&Audio Media Board - FireBeetle Covers - audio module included with the OV7725 camera - for ESP32 - DFRobot DFR0498
Camera&Audio Media Board - FireBeetle Covers from DFRobot is a module designed for Internet of Things (IoT) solutions, with an emphasis on multimedia support (the module does not enable video recording and transmission). The board is equipped with an audio module and interfaces for connecting the IIS NAU8822 codec , camera , SD card (SDIO), headphones and microphone. The set also includes an OV7725 camera with a resolution of 640 x 480 px. The whole thing is intended for use with FireBeetle ESP32 boards.
Camera&Audio Media Board is a perfect solution for those who want to easily implement multimedia in their IoT projects . It will work well as a complementary element in applications related to monitoring, sound recording or the creation of broadly understood interactive applications.
Camera&Audio Media Board - FireBeetle Covers - audio module included with the OV7725 camera - for ESP32 - DFRobot DFR0498.
The manufacturer has prepared a detailed user guide that will help you start working with the module. You will find there, among others, a description of the pinouts, sample program codes and much more. Check!
The module does not enable video recording and transmission.
Special features of the Camera&Audio Media Board
- Multimedia for IoT : the module was created to support multimedia in broadly understood IoT solutions.
- NAU8822 IIS Codec Support : Allows you to connect and control the NAU8822 codec, which can support both 12W/8Ω BTL speaker and 40mW/16Ω headphones.
- Camera interface : the module has an interface for connecting the camera included in the kit, which can be used as a data input device.
- Microphone interface : the board is also equipped with a mini MIC interface, enabling the recording of sounds, which can then be saved on a microSD card (not included).
- DAC support : NAU8822 offers support for DAC audio signal acquisition and a programmable microphone amplifier.
Technical specifications of the module
- Operating voltage: 3.7V to 5.5V (VCC)
- Output voltage: 3.3V
- Transducer: NAU8822
- DAC: 94 dB SNR, -84 dB THD
- ADC: 90 dB SNR, -80 dB THD
- Integrated BTL speaker amplifier: 1 W / 8 Ohm
- Integrated headphone amplifier: 40 mW / 16 Ohm
- Integrated programmable microphone amplifier
- Typical sampling rate: 8 kHz, 48 kHz, 96 kHz, 192 kHz
- Video interface: PCM and I2S
- Microphone: electret
- Exit: analog
- Direction: omnidirectional
- Frequency range: 100 Hz to 15 kHz
- Sensitivity: -43 dB ± 5 dB at 94 dB SPL
- Signal-to-noise ratio: 58 dB
- User-defined button: tested by IO16(DI)
- RESET button: x1
- microSD card slot:
- Bus interface: SDIO protocol
- Default baud rate: max. 10MHz
- Baud rate: 20MHz
Arrangement of elements on the board.
Camera&Audio Media Board - FireBeetle Covers.
Technical specifications of the camera
The manufacturer stipulates that the data listed below are for informational purposes only; some functions cannot be implemented by ESP32 now.
- Sensor: OV7725
- Resolution: 640 x 480 px
- Optical size: 1/6"
- Viewing angle: 25°
- Interface: standard SCCB
- Output pixel format: Raw RGB, RGB (RGB4:2:2, RGB565/555/444), YCbCr (4:2:2)
- Image size: VGA, QVGA and CIF up to 40 x 30 px
- VarioPixel Subsampling
- Automatic image control: automatic exposure control (AEC), automatic gain control (AGC), automatic white balance (AWB), automatic bandpass filter and automatic black level calibration (ABL)
- Image quality control: saturation, tone, gamma, clarity and anti-noise
- ISP: noise reduction and defect calibration
- Lens shading correction
- Automatic saturation adjustment
- Frame synchronization
- Constant focus
Set contents
- Camera&Audio Media Board module - 1 piece
- OV7725 camera - 1 piece
- Male connector 1x 18pin - 2.54 mm - 2 pieces
- Female connector 1x18pin - 2.54 mm - vertical - 2 pieces
The set also includes a camera.
