List of products by brand Akso - Strona 10
Female-female 5 pin - 40cm - 5pcs
5-pin multicolor cable with the length of about 40 cm. Ended on both sides with a female connector - pitch of 2.54 mm.Socket 1x20pin - 2,54mm long - 5pcs.
20-pin straight connector for soldering to PCB. Used for example to connect male wires. Raster is 2.54 mm. It has extended pins length of 10.5 mm. Price per 5 pcs .Cable Assembly 2 pin female raster 2,54 mm - 40 cm - 5 PCs.
Cable with a length of 40 cm ended on both sides with female plugs 2 pin - raster 2.54 mm. Price for 5 pcs. Sale of the product in different color versions sent at random .Speaker YD27 0.5W 8Ohm - 27x5mm
The loudspeaker is 0.5 W, has a resistance of 8 Ω and measures 27 x 5 mm.Microphone 36-38dB 6/2,7mm - THT - 10pcs.
Height h: 2,7 mm. Diameter Ø: 6 mm Sensitivity: 36 - 38 dB. Pins - pitch: 1.8 mm.Rotary switch 2-positions 2 circuits - 30mm
Rotary switch, 2-state for the case, equipped with 10 contacts. The total height is 29.5 mm.AL2418 banana socket - black - 4mm - 5pcs
Banana slot in black color with the length of 44 mm with the hole diameter of 4 mm. Set of 5 pcs slots.M2.5 Self-Locking Nuts - 10 pcs.
Self locking / self stopping nut M2.5 is a fastener used in screw connections. This type of nut is equipped with a polyamide insert that increases friction and prevents...Resistance soldering iron ZD-721B 60W
Resistance soldering iron 60 W, powered by a mains voltage of 230 V. It is ideal for soldering or desoldering small electronic components.IDC 10 female cable - female pins
Cable with the length of 25 cm, on the one side, it is ended with 10-pin female slot - IDC with the pitch of 2.54 mm, on the other with the free female cables.DC 5,5/2,1mm socket adapter - DC 4,8/1,7mm plug
The adapter allows you to connect a power supply with DC 5,5 / 2,1 mm plug for modules with DC 4,8 / 1,7 mm slot. Cable length is 15 cm.M2,5 PH Screws Length 8mm with Washers - 10pcs.
Set contains 10 pieces of the cross screws with the M2. 5 thread with the length of 8 mm, and 10 washers.Stepper motor driver L9110 12V/0,8A
The driver module uses L9110 chips to control one stepper motor or two DC motors. Supply voltage is from 3 V to 12 V. Continuous current up to 800 mA.Case for connector D-SUB 9 - 2pcs.
Shield screwed to the D-SUB 9 connector along with the set of screws.Round self-adhesive feet 20mm - 4 pieces
Self-adhesive feet - round props for electronic modules, about 20mm in diameter. Price for 4 PCs.Angle holder for an inductive sensor - M12
Angular mount for inductive proximity sensor. The dimensions of the base are 37 x 20 mm , the dimensions of the holder are 39 x 20 mm .Integrated circuit ULN2003AN 7xDarlington - THT - 5 pcs.
7-channel Darlington driver in DIP16 case. The set contains 5 pieces of ULN2003AN circuit.Slide switch SS12T40 2-position angle
Slide switch, straight, to print with the size of 8.6 x 8.5 x 7.3 mm. Pins pitch: 2.00 mm.Eight-segment display x1 - 14mm green - common anode
Single 8-segment display with digits with points and some characters.Relay NT73-2C-S12 - 12V coil, 6A/250VAC contacts
Coil voltage: 12 V, contacts: 6 A / 250 VAC / 28 V DC. Dimensions: 19.5 x 15.6 mm, height: 15.3 mm.
