- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
List of products by brand Akso - Strona 11
Loading...
Plug DC 5,5/2,5mm with terminal connector - 5pcs
DC φ5.5 x 2.5 mm plug (for power supply unit) with a detachable connector that allows you to mount the cable with a screwdriver. Items are sold in sets of 5 pieces.
Index: KAB-07208
Index: KAB-07208
Raychem RUEF500 polymer fuse 30V/5A 10.2mm raster - 10pcs
Polymer fuse operating with the voltage of up to 30 V, which allows for the flow of the current of up to 5.0 A. The price is for 10 pieces.
Index: KAB-05479
Index: KAB-05479
Small metal vibrating motor powered by 3 V. Idle current 1200 mA. Dimensions: 19 x 10 x 8 mm.
Index: MOT-04730
Index: MOT-04730
Limit switch with roller - WK7121
Limit switch with 7 cm long lever ended with a roller. It operates with 250 V and the maximum load is 5 A. The limit switch is used to detect the set position of the moving...
Index: AKS-14638
Index: AKS-14638
Cable, adapter 3x1 JST, 2mm raster - BLS 2.54mm raster - 5pcs.
Cable, adapter with plug, pitch of 2 mm and the female connector 3x1, 2.54 mm pitch. It is compatible with analog Sharp distance sensors. The cable length is min. 30 cm.
Index: KAB-01923
Index: KAB-01923
Quick connector 1-2,5mm - blue - 10pcs.
Quick connector, allowing to connect the wires with diameter from 1 mm to 2,5 mm without removing the insulation. Items are sold in sets of 10 pieces.
Index: KAB-07595
Index: KAB-07595
The fan with the input voltage of 12 V, current consumption of 0.2 A and size of 60 x 60 x 15 mm.
Index: MOT-03874
Index: MOT-03874
220V AC - 10mm indicator - red
The light operates at 220 V AC. It has a diameter of 10 mm.
Index: LED-08981
Index: LED-08981
Round rubber grommet 8mm - 10pcs.
Rubber cable gland with the thread of 8 mm. Prevents the cable passing through the body wall from rubbing. Designed for wire diameters from 7 mm to 9 mm.
Index: KAB-09916
Index: KAB-09916
IDC 16 pin socket for tape - 5pcs
16-pin IDC slot clamped for the tape (pitch: 2.54 mm). Price is for 5 pieces.
Index: KAB-00197
Index: KAB-00197
Speaker YD40 0.25W 50Ohm - 40x16mm
Speaker power 0.25 W, impedance of 50 Ohms, and dimensions of 40 x 16 mm.
Index: EAK-03470
Index: EAK-03470
The NTC 110 thermistor with a resistance of 22 kΩ and a tolerance of 5 %.
Index: SES-04950
Index: SES-04950
Plastic brush with antistatic properties. It is safe to use it to clean electronics. Brush length is 22.5 cm and the bristles length is 8.8 cm
Index: NSZ-04774
Index: NSZ-04774
Wooded bruss with antistatic properties. It is safe to use it to clean electronics. Brush length is 16.5 cm and the bristles length is 6.5 cm
Index: NSZ-04768
Index: NSZ-04768
Plastic brush with antistatic properties. It is safe to use it to clean electronics. Brush length is 17 cm and the bristles length is 6 cm
Index: NSZ-04773
Index: NSZ-04773
Socket DC 5.5 x 2.1 mm with terminal connector
DC φ5.5 x 2.1 mm slot (for power supply unit) with a detachable connector that allows you to mount the cable using screwdriver.
Index: KAB-07210
Index: KAB-07210
Thermometer with LCD display from -50 °C to 100 °C - black
Digital thermometer for mounting on a panel, the LCD display. It works in the range from -50 °C to 100 °C. The probe is on a wire with a length of 1 m. The device is powered by...
Index: SES-03101
Index: SES-03101
USB standard connector, type A in SMD surface soldered housing.
Index: KAB-00419
Index: KAB-00419
Index: PAS-01115
Solid state relay SSR-40A 480VAC / 40A - 32VDC
Single-phase solid -state relay SSR with a voltage of 480 V AC and 32 V DC. The rated current is 40 A.
Index: AKS-10219
Index: AKS-10219
Electrolytic capacitor 330uF/35V 10x12mm 105C THT - 10pcs.
Through hole electrolytic capacitor of 330 uF / 35 V. Pins' pitch: 5 mm. Size: Ø10 x 12 mm. Price is for 10 pieces.
Index: PAS-04120
Index: PAS-04120
Soldering fume absorber AKS-153A on a jib
The device removes fumes generating during soldering. It has two replaceable carbon filters. The absorption efficiency reaches 1 m3/min. Absorber is powered by mains voltage...
Index: AKS-10823
Index: AKS-10823
The NTC 110 thermistor with a resistance of 100 KΩ and a tolerance of 5 %.
Index: SES-04952
Index: SES-04952
Test stand type ZIF for chips with 16 pins. It has a lever, thanks to which the multi-pin socket is crimped. The stand is equipped with gold-plated contacts. The raster between...
Index: UCC-04731
Index: UCC-04731