- Sale
- Sale
- Reduced price
- Sale
List of products by brand Akso - Strona 12
Loading...
AC power socket, eighth for case with switch
Power AC eight slot for the case with switch of ON-OFF type. Contact load is 250 V / 2.5 A.
Index: AKS-10841
Index: AKS-10841
4-pin female socket housing 2,5mm - 5pcs.
Female 4-pin socket housing - 2.50 mm pitch. There are 5 pieces in the set.
Index: KAB-06312
Index: KAB-06312
- Sale
Fuse connector with protective cover PTF-78 5x20mm - gray - 5pcs.
A case with a lid for the fuse, type of 5 x 20 mm.
Index: KAB-05472
Index: KAB-05472
DC 5,5/2,1mm socket for case - screwed - 5pcs.
Power DC φ5.5 x 2.1 mm slot bolted to a case, made of plastic.
Index: KAB-09350
Index: KAB-09350
Set of Gears and Toothed Belts - 75pcs.
A set of gears, belts and pulleys in various sizes and shapes containing 75 pieces.
Index: ZEB-06177
Index: ZEB-06177
Markers kit for 4mm cables - 100pcs
Kit for marking cables with diameters up to 4 mm. Contains 10 markers each with numbers from 0 to 9 in different colours.
Index: KAB-07578
Index: KAB-07578
Analog Comparator LM339 - THT - 5pcs
Power supply 36 Volt or +/-18 V. DIP14 Case. Set of 5 pcs.
Index: UCC-00177
Index: UCC-00177
Banana socket - red - 4mm - 5pcs.
Banana slot in red color with the length of 22 mm with the hole diameter of 4 mm.
Index: KAB-06753
Index: KAB-06753
Captone adhesive tape resistant to high temperatures and chemicals. It leaves no traces of glue after removal. Roll width is 10 mm.
Index: NSZ-05539
Index: NSZ-05539
Stand for soldering iron ZD-10T
Universal stand for soldering iron is suitable for most resistance soldering irons. It also has a spot for the sponge (included).
Index: LUT-04160
Index: LUT-04160
Index: ETN-04844
Speaker YD30 0.5W 8Ohm - 28x12mm
Speaker power 0.5 W, resistance 8 Ohm and dimensions of 15 x 12 mm.
Index: EAK-03469
Index: EAK-03469
Relay NT73-2C-S12 - 5V coil, 2x 12A/125VAC contacts
Coil voltage: 5, contacts: 12 A / 125 V AC. Dimensions: 19.5 x 15.6 mm, height: 15,3 mm.
Index: PAS-01565
Index: PAS-01565
Slide switch SS22T20 2-position - 5pcs.
Slide switch, straight, to print with the size of 9 x 3.5 x 3.5 mm. Pins pitch: 2.54 mm.
Index: UCC-05273
Index: UCC-05273
3-pin female socket housing 2,5mm - 5pcs.
3-pin female socket housing - 2.50 mm raster. In the set there are 5 pieces.
Index: KAB-06311
Index: KAB-06311
- Sale
Female-female 4 pin - 20cm - 5 pcs.
4-pin multicolor cable, length about 20 cm. Terminated on both sides with female connector - raster 2.54 mm. Price for 5 pieces.
Index: KAB-02713
Index: KAB-02713
Crocodile connector 51mm without insulation - 5pcs.
Small red crocodile connector with the length of approx. 51mm without the insulation. Price is for 5 pieces.
Index: KAB-05685
Index: KAB-05685
Small metal motor powered from 3 V - 6 V. Idle current 94 mA. Dimensions: 8 x 15 mm . Speed approx. 17000 rpm.
Index: MOT-01647
Index: MOT-01647
Motor regulator DC 12-40V/10A/400W - with a speed control knob
A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.
Index: MOD-06666
Index: MOD-06666
Rotary switch 12-position / 1 circuit - 37mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 37 mm.
Index: UCC-06148
Index: UCC-06148
Microphone 50-56dB 9/4,5mm - THT - 10 pcs.
Height h: 4.5 mm. Diameter Ø: 9 mm. Sensitivity: 50-56 dB. Pins for soldering to the printed circuit board.
Index: UCC-00740
Index: UCC-00740
Plastic brush with antistatic properties. It is safe to use it to clean electronics. Brush length is approx. 15 cm, and the bristles length is 4 cm
Index: NSZ-04771
Index: NSZ-04771
Tact Switch Buttons Kit - 140pcs
Set of 140 Tact Switch buttons . There are 14 different versions in the set.
Index: SWT-09781
Index: SWT-09781
Shears designed for precise cutting of single or double-sided laminates up to 1.6 mm thick and universal tiles. With 45 mm long serrated blade. The shears have a safety...
Index: NSZ-09792
Index: NSZ-09792