- New
- Reduced price
- Sale
Sonoff M5-3C-80-FW - frame for wall switch M5-80 - triple - white
Index: INN-25520
- Reduced price
- Sale
- Sale
- Sale
List of products by brand Akso - Strona 20
Loading...
Rubber gland round 5mm - 10pcs
Rubber grommet with a diameter of 5 mm. Prevents the cable from rubbing through, e.g. the enclosure wall. Suitable for cables from 4mm to 6mm diameter.
Index: KAB-07508
Index: KAB-07508
Breadboard - 830 holes transparent
Breadboard is used to create and test electronic circuits without soldering. Version with 830 fields, sized 165 x 53 mm in a transparent case . B lue and red stripes, marking...
Index: PLY-01763
Index: PLY-01763
Markers kit for 4mm cables - 100pcs
Kit for marking cables with diameters up to 4 mm. Contains 10 markers each with numbers from 0 to 9 in different colours.
Index: KAB-07578
Index: KAB-07578
Wooded bruss with antistatic properties. It is safe to use it to clean electronics. Brush length is 15 cm and the bristles length is 3.5 cm
Index: NSZ-04767
Index: NSZ-04767
Small metal motor powered from 3 V to 6 V. Idle current 500 mA. Dimensions: 43,6 x 27,7 mm.
Index: MOT-04719
Index: MOT-04719
Slide switch SS22T20 2-position - 5pcs.
Slide switch, straight, to print with the size of 9 x 3.5 x 3.5 mm. Pins pitch: 2.54 mm.
Index: UCC-05273
Index: UCC-05273
Speaker YD30 0.5W 8Ohm - 28x12mm
Speaker power 0.5 W, resistance 8 Ohm and dimensions of 15 x 12 mm.
Index: EAK-03469
Index: EAK-03469
Stand for soldering iron ZD-10T
Universal stand for soldering iron is suitable for most resistance soldering irons. It also has a spot for the sponge (included).
Index: LUT-04160
Index: LUT-04160
Socket D-SUB 9 for cable - 5pcs.
D-SUB 9 female socket for cable used e.g. for communication via RS232 protocol.
Index: KAB-02455
Index: KAB-02455
Captone adhesive tape resistant to high temperatures and chemicals. It leaves no traces of glue after removal. Roll width is 10 mm.
Index: NSZ-05539
Index: NSZ-05539
Banana socket - red - 4mm - 5pcs.
Banana slot in red color with the length of 22 mm with the hole diameter of 4 mm.
Index: KAB-06753
Index: KAB-06753
Index: ETN-04844
Ceramic capacitor 10pF/50V THT - 10pcs
Through hole ceramic capacitor of 10 pF / 50 V. The price for 10 pieces.
Index: PAS-03591
Index: PAS-03591
Analog Comparator LM339 - THT - 5pcs
Power supply 36 Volt or +/-18 V. DIP14 Case. Set of 5 pcs.
Index: UCC-00177
Index: UCC-00177
A set of 10 drills for metal and hole making in printed circuit boards.
Index: NSZ-00232
Index: NSZ-00232
Relay NT73-2C-S12 - 5V coil, 2x 12A/125VAC contacts
Coil voltage: 5, contacts: 12 A / 125 V AC. Dimensions: 19.5 x 15.6 mm, height: 15,3 mm.
Index: PAS-01565
Index: PAS-01565
Rotary switch 12-position / 1 circuit - 37mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 37 mm.
Index: UCC-06148
Index: UCC-06148
2-pin straight connector for soldering to PCB. Used for example to connect male wires. Raster is equal to 2.54 mm. Socket is sold in pack of 10 pieces.
Index: UCC-08501
Index: UCC-08501
Microphone 50-56dB 9/4,5mm - THT - 10 pcs.
Height h: 4.5 mm. Diameter Ø: 9 mm. Sensitivity: 50-56 dB. Pins for soldering to the printed circuit board.
Index: UCC-00740
Index: UCC-00740
Crocodile connector 51mm without insulation - 5pcs.
Small red crocodile connector with the length of approx. 51mm without the insulation. Price is for 5 pieces.
Index: KAB-05685
Index: KAB-05685
D-SUB 9 male plug for the cable is used, for example, for communication via the RS232 protocol.
Index: KAB-02456
Index: KAB-02456
Small metal motor powered from 3 V - 6 V. Idle current 94 mA. Dimensions: 8 x 15 mm . Speed approx. 17000 rpm.
Index: MOT-01647
Index: MOT-01647
Motor regulator DC 12-40V/10A/400W - with a speed control knob
A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.
Index: MOD-06666
Index: MOD-06666
3-pin female socket housing 2,5mm - 5pcs.
3-pin female socket housing - 2.50 mm raster. In the set there are 5 pieces.
Index: KAB-06311
Index: KAB-06311