List of products by brand Akso - Strona 31
Loading...
THT 1/4 W 330Ω resistor - 100pcs.
The 1/4W 330Ω THT resistor is a basic passive component used in a wide range of electronics applications. Its standard through-hole (THT) mounting makes it easy to use for...
Index: ZES-08491
Index: ZES-08491
LED 3mm holder - plastic concave - 10pcs
Holder for LEDs 3 mm, made of plastic. The subject of the sale is the holder, the LEDs can be purchased separately. Price for 10 pieces.
Index: AKS-13703
Index: AKS-13703
- Sale
- SPECIAL OFFERS
Rubber gland round 3mm - 10pcs
Rubber cable gland with the thread of 3 mm. Prevents the cable passing through the body wall from rubbing. Designed for wire diameters from 2 mm to 4 mm.
Index: KAB-11522
Index: KAB-11522
26 IDC gray ribbon cable gray 1.27 mm raster - 30m roll
IDC ribbon cable, 26-vein. Pitch: 1,27 mm. Roller: 30 m.
Index: AKS-10875
Index: AKS-10875
Metal vibrating motor with a cap, supplied with voltage from 6 V. Dimensions 18,5 x 24 mm, total length 41 mm.
Index: MOT-01666
Index: MOT-01666
26-pin (2 x 13) angled plug for printing (pitch: 2.54 mm). Price is for 5 pieces.
Index: KAB-01945
Index: KAB-01945
- Discontinued product
High temperatura probe PT1000 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 500 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07470
Index: SES-07470
LED light, working voltage 12 V DC. It has a diameter of 8 mm.
Index: LED-08985
Index: LED-08985
- Discontinued product
D-SUB 15 male plug is used, for example, as the GamePort connector.
Index: KAB-06997
Index: KAB-06997
- Discontinued product
Stepper motor JK42HS60-1704A 200 steps 5V/1.7A/0.66Nm
Bipolar stepper motor, four wire. It has a resolution of 200 steps per revolution (1.8 degrees) . It is powered by 5.0 V and draws 1700 mA per coil. The torque is 6.8 kg*cm...
Index: AKS-11624
Index: AKS-11624
NTC 110 10kΩ thermistor with M6 screw connection
Thermistor of NTC type with a resistance of 10 kΩ with connector for M6 screw. The connecting cable has a length of 160 mm.
Index: SES-03878
Index: SES-03878
Rotary switch 8-position 1 circuit - 37mm
Rotary switch, eight-state for the case, equipped with 9 contacts. The total height is 37 mm.
Index: UCC-06150
Index: UCC-06150
Ribbon cable 40 gray IDC raster 1.27 mm - roll 30.5 m
IDC ribbon cable, 40-vein. Pitch: 1,27 mm. Roller: 30.5 m.
Index: AKS-10953
Index: AKS-10953
- Discontinued product
Plug WT-16 - with earthing - white
The angled plug for mounting on the cable. It has the ground.
Index: KAB-08137
Index: KAB-08137
ON-OFF bistable switch - PBW-16APP - 2A 250V - flat red
Bistable pushbutton, flat with red lighting. Load capacity of contacts up to 2 A for 250 V .
Index: AKS-10811
Index: AKS-10811
Ribbon cable 20 gray IDC, raster 1.27mm - roll 30.5m
IDC 20 core ribbon cable. Raster: 1.27 mm. Roll: 30,5 m .
Index: AKS-10951
Index: AKS-10951
D-SUB 9 male plug is used, for example, for the communication via the RS232 protocol.
Index: KAB-02454
Index: KAB-02454
- Discontinued product
Magnetic self-adhesive tape - 10mm, 10m long
Self-adhesive magnetic tape . The non-magnetic side has a self-adhesive layer; therefore it can be stuck to almost any surface including paper, plastics, degreased aluminium...
Index: NSZ-09805
Index: NSZ-09805
- Discontinued product
Sealed connector for connecting the electrical wires. Thanks to the hermetic case, there is no possibility of that the water and moisture will come through. It has the IP68...
Index: KAB-09714
Index: KAB-09714
- Discontinued product
- SPECIAL OFFERS
Slot for micro SD memory card uSD589
Connector - slot for micro SD memory card with a flap.
Index: PAS-01114
Index: PAS-01114
- Discontinued product
ZP2 industrial connector with quick connection - 2-pin
Industrial connector for quick connection of the 2-wire cable.
Index: KAB-05821
Index: KAB-05821
LED indicator 12V DC- 12mm - red
LED light, working voltage 12 V DC. It has a diameter of 12 mm.
Index: LED-08994
Index: LED-08994
Test stand type ZIF for chips with 28 pins. It has a lever, thanks to which the multi-pin socket is crimped. The stand is equipped with gold-plated contacts. The raster...
Index: UCC-04742
Index: UCC-04742
Index: PLY-00302