List of products by brand Akso - Strona 30
Kanthal A1 resistance wire 0.25mm 23,3Ω/m - 9,1m
Characterized by high temperature resistance, Kanthal A1 resistance wire with a resistance of 23.3 Ω / m. The wire is wound on a spool with a diameter of 0.25 mm and length...Kanthal A1 resistance wire 0,51mm 6Ω/m - 30,5m
Kanthal A1 resistance wire made of an alloy of iron, chromium and aluminium. It is characterized by resistance to high temperatures. The wire has a diameter of 0.51 mm and...Electrolytic capacitor 330uF/25V 10x12mm 105C THT - 10pcs
Through hole electrolytic capacitor of 330 uF / 25 V. Pins' pitch: 3,5 mm. Size: Ø10 x 12 mm. Price is for 10 pieces.Laminate FR4 one-sided size XL
FR4 laminate on one side with a thickness of about 1.6 mm. Copper layer 35 um. The sheet dimensions are 170 x 250 mm, with a tolerance of 20 mm.Stepper Motor JK42HS48-1684 200 steps 2,8V/1,68A/0,43Nm
Bipolar stepper motor , four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). Powered by 2.8 V, draws 1680 mA per coil. Torque is 4.4 kg*cm (0.43 Nm)....- Reduced price
- Promotion
Stepper Motor JK35HY26-0284 200 steps 7,4V/0,6A/0,06Nm
Bipolar stepper motor, four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 7.4 V, draws 600 mA per coil. Torque is 0.65 kg*cm (0.064 Nm)....NTC 110 10kΩ thermistor with cable
The NTC 110 thermistor with the resistance of 10 kΩ. The connecting cable has a length of 50 cm.Rotary switch 12-position 1 circuits - 60mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 60 mm.Rotary switch 4-position 3 circuits - 60mm
Rotary switch, 6-state for the case, equipped with 15 contacts. The total height is 60 mm.2,54 mm - angular plug 12-pin - 5pcs.
The 12-pin angular plug for printing, the pitch is 2.54 mm. The set includes 5 x 12-pin plugs.MAX485 transceiver RS485 - DIP - 5pcs.
A circuit used to convert RS-485 port voltage to TTL standard. The circuit is in DIP8 chrono housing.DC splitter 5.5/2.1mm - 4 plugs
Adapter with one female 5,5 / 2,1 mm socket and four male 5.5 / 2.1 mm plugs. It can be used, i.a. to power many LED strips from one power source.Solenoid Valve 12V 0,02-0,08MPa- 1'' - DCF-HS1B
The device supports the control of fluid flow using a computer or microcontroller. The valve is powered with the voltage of 12 V.The tape for welding cells 0.12 x 8mm - 10m
Nickel-plated welding tape with 10 m length. Dimensions: 8 x 0.12 mm.Self-adhesive membrane keypad - 1 "SOS" key
Membrane keyboard has one button labeled "SOS". On its back is the tape to facilitate mounting.GPS antenna with SMA connector, magnetic mount 3V-5V
GPS antenna with SMA connector, attached on the magnets. Supply voltage from 3 V to 5 V.Photoelectric sensor SPDT E3JK-R4M1 12V IP65 - 4m
Photoelectric transmitting sensor. It detects the objects by the method of reflection. Detection range is up to 4 meters. It has Light-ON operation mode. It is powered with...ON-OFF bistable switch - PBW-16AP - 2A/250V - flat green round
Flat bistable button with red illumination in the form of the ring. Contact load is up to 2 A for 250 V.ON-OFF switch monostable - PBW-16BPW - 2A 250V - green / red
Monostable salient switch with the green/red backlight. Contact load is 2 A for 250 V.- Reduced price
- Promotion
Integrated circuit ULN2003 7xDarlington - SMD - 5pcs.
7-channel Darlington driver in SO-16 case.