List of products by brand Akso - Strona 29
PWM motor driver DC 6-24V/3A/72W - with a speed control knob
Module with built-in rotary potentiometer for DC motor speed control by filling the PWM signal. It operates with motors from 6 V to 24 V up to 72 W (current consumption up to 3...AL2319 banana socket on cable - black - 4mm
Black banana jack 46.5mm long with a 4mm diameter hole for cable mounting.AL2319 banana socket on cable - red - 4mm
Red banana jack 46.5 mm long with a 4 mm hole for cable mounting.High temperatura probe PT100 - 100Ω 6x50mm metal braid
Waterproof, analog sensor of high temperature operating in the range from -30 °C to 500 °C. The output is the resistance depending on temperature. The probe's length is 50 mm.Connector for LED strip 10mm 2 pin - DC 5.5/2.1mm
Connector to connect a 10 mm wide LED strip with a 5.5 / 2.1 mm power supply. It has 2 pins. Does not work with RGB LED strips. Cable length is about 15 cm.DC splitter 5.5/2.1mm - 5 plugs
Branch joint with one female 5,5 / 2,1 mm slot and five male 5.5 / 2.1 mm plugs. It can be used, i.a. to supply many LED strips from one power source.Adapter DC 5,5/2,1mm - 3 plugs
Splitter with one female socket 5.5 / 2.1 mm and three male plugs 5.5 / 2.1 mm. Can be used, among other things, to power multiple LED strips from one power supply.TO247 silicon cover for PCB case
Silicone shield used for circuits in TO247 enclosure.- Reduced price
- Promotion
LED indicator 230V AC - 12mm - red
LED light, operating voltage 230 V AC. It has a diameter of 12 mm.Pixel chain - 50x LED 5mm cool white
50 bright LEDs in cool white color united in one chain. Each pixel has a diameter of 5 mm, protected by a silicone case, IP65.Pixel chain - 50x LED 5mm green
50 bright LEDs in green color united in one chain. Each pixel has a diameter of 5 mm, protected by a silicone case, IP65.ON-OFF switch monostable - PBW-16BP - 2A 250V flat
Monostable, flat switch with contact rating of 2 A for 250 V.Connector / cube for PBW-16BP switches
The cube provides a fast connection of the switches from ther series PBW-16PB. It has the protection against the accidental taking out of the button. The cable length is 15 cm.Magnetic sensor - CMD25 reed switch + screws
Wireless metal proximity sensor activated magnetically. Case dimensions - 25 x 48 mm.Bistable switch ON-OFF PB-12A-3, round 30V/1A - black - 5pcs.
Bistable switch with a round attachment with a loading capacity of 1A contacts for 30 VMonostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Monostable, flat switch with red point light. Contact load: 2 A for 250 V.- Reduced price
- Promotion
Ribbon cable 16 colored wires IDC raster 1.27 mm - roll 30.5 m
IDC ribbon cable, 16-vein. Pitch: 1,27 mm. Roller: 30.5 m.Stepper Motor 42HS34-0406 200 steps 10V / 0,4A / 0,15Nm
Unipolar stepper motor, six wire. It has a resolution of 200 steps per revolution (1.8 degrees) . It is powered by 10 V and draws 400 mA current per coil. The torque is 1.6...Inductive Sensor Straight Mount - M18
Straight holder for inductive proximity sensor. Dimensions - 26 x 86 mm.Limit switch with folding roller - WK7124
Limit switch with a 7 cm long spring loaded lever ended with a folding roller. It operates at 250 V and the maximum load is 5 A. The limit switch is used to detect the position...