- Sale
- Sale
- Reduced price
- Sale
List of products by brand Akso - Strona 34
Loading...
A set of 10 drills for metal and hole making in printed circuit boards. The drill bit dimensions are 53 x 2.5 mm.
Index: NSZ-00619
Index: NSZ-00619
- Discontinued product
- SPECIAL OFFERS
LED light, working voltage 12 V DC. It has a diameter of 8 mm.
Index: LED-08985
Index: LED-08985
- Discontinued product
ON-OFF switch monostable - PBW-16BP - 2A 250V - green round
Monostable salient switch with the green backlight in the shape of a ring. Contact load is 2 A for 250 V.
Index: AKS-10815
Index: AKS-10815
ON-OFF switch monostable - PBW-19BS - 2A / 250V protruding
Monostable salient button with a loading capacity of contacts: 2 A for 250 V.
Index: AKS-12072
Index: AKS-12072
- Discontinued product
- SPECIAL OFFERS
D-SUB 15 male plug is used, for example, as the GamePort connector.
Index: KAB-06997
Index: KAB-06997
- Discontinued product
LED indicator 230V AC - 8mm - blue
LED light, operating voltage 230 V AC. It has a diameter of 10 mm.
Index: LED-08990
Index: LED-08990
- Discontinued product
- SPECIAL OFFERS
ESD stand for PCB 410x140x20mm
Antistatic stand for PCBs. It allows you to store up to 25 pieces. It has handles for easy carrying.
Index: MOD-07212
Index: MOD-07212
Semiconductor relay SSR-80A 480VAC / 80A - 32VDC
Solid state relay, single-phase SSR with the AC voltage of 480 V and constant of 32 V. Rated current is 80 A. The device does not create noise when switching.
Index: AKS-10220
Index: AKS-10220
- Discontinued product
Ribbon cable 40 gray IDC raster 1.27 mm - roll 30.5 m
IDC ribbon cable, 40-vein. Pitch: 1,27 mm. Roller: 30.5 m.
Index: AKS-10953
Index: AKS-10953
- Discontinued product
Plug WT-16 - with earthing - white
The angled plug for mounting on the cable. It has the ground.
Index: KAB-08137
Index: KAB-08137
Kanthal A1 resistance wire 0,51mm 6Ω/m - 9,1m
Made of an alloy of iron, chromium and aluminium, Kanthal A1 type resistance wire 9.1 m long. It has a diameter of 0.51 mm and its resistance value is 6 Ω / m. AWG of the...
Index: AKS-16667
Index: AKS-16667
Magnetic self-adhesive tape - 10mm, 10m long
Self-adhesive magnetic tape . The non-magnetic side has a self-adhesive layer; therefore it can be stuck to almost any surface including paper, plastics, degreased aluminium...
Index: NSZ-09805
Index: NSZ-09805
- Discontinued product
D-SUB 9 male plug is used, for example, for the communication via the RS232 protocol.
Index: KAB-02454
Index: KAB-02454
- Discontinued product
Stepper Motor 42HM48-1206 400 steps 4,0V / 1,2A / 0,31Nm
Unipolar stepper motor, six wire. It has a resolution of 400 steps per revolution (0.9 degrees) . It is powered by 4.0 V and draws 1200 mA per coil. The torque is 3.17 kg*cm...
Index: AKS-11619
Index: AKS-11619
Sealed connector for connecting the electrical wires. Thanks to the hermetic case, there is no possibility of that the water and moisture will come through. It has the IP68...
Index: KAB-09714
Index: KAB-09714
- Discontinued product
Slot for micro SD memory card uSD589
Connector - slot for micro SD memory card with a flap.
Index: PAS-01114
Index: PAS-01114
- Discontinued product
ON-OFF bistable switch - PBW-12A - 2A / 250V - flat red / green + resistor
A flat bistable switch with red / green backlight. Contact load is 2 A for 250 V. Set also includes a resistor.
Index: AKS-10799
Index: AKS-10799
The fan with the input voltage of 12 V, current consumption of 0.2 A and size of 60 x 60 x 25 mm.
Index: MOT-03875
Index: MOT-03875
Mini USB B plug for soldering the wires with 5 contacts in a metal case.
Index: KAB-00421
Index: KAB-00421
- Discontinued product
LED indicator 12V DC - 8mm - green
LED indicator, working voltage 12 V DC. It has a diameter of 8 mm.
Index: LED-08986
Index: LED-08986
High temperatura probe PT100 - 7x200mm
Waterproof analogue sensor with the high temperature working in the range from -200°C to 420°C. The output is resistance dependent on temperature. Probe length is 200 mm.
Index: SES-07467
Index: SES-07467
Connector 2,54 mm - socket housing 10-pin - 5pcs.
The 10-pin socket's case on the cable, the pitch is 2.54 mm. The kit includes 5 x 10-pin cases.
Index: KAB-06778
Index: KAB-06778
- Discontinued product
Angle holder for an inductive sensor - M8
The angular bracket for inductive proximity sensor. The base dimensions: 28 x 16 mm, dimensions of the bracket - 33 x 16 mm.
Index: AKS-11680
Index: AKS-11680
- Discontinued product
LED indicator 12V AC/DC - 28mm - green
The light operates with a voltage of 12 V AC/DC. It has a diameter of 28 mm.
Index: LED-09013
Index: LED-09013
- Discontinued product