Description: Filament Fiberlogy Nylon PA12+GF15 1,75 mm 0,5 kg - Natural
Nylon filter PA12+GF15 has a diameter of 1.75 mm and is made innaturalcolour from nylon and glass fibre. It is used in theautomotive industry(elements in the engine compartment, air inlets, fluid inlets),industry(spare parts, utility models),medicine(dentures, medical equipment) and even insports(protectors, accessories). The product witha net weight of 0.5 kgis wound on a spool and vacuum packed. The manufacturer of the branch isFiberlogy.
In our offer of filaments you will also find other materials and colors.
In this video, we explain the characteristics of the selected filament in order to facilitate the selection of the type of filament to your expectations.
Properties of the Nylon PA12+GF15 pillar
Nylon PA12+GF15 is characterizedbyhigh resistance to chemicals. It also shows high mechanical strength. Enriching the material withglass fibreincreases its impact resistance and stability. It is resistant to material fatigue. Nylon PA12+GF15 does not require a closed working chamber during printing.
Suggested printing parameters of the filament
| Printing temperature | From 255°C to 270°C |
| Table temperature | From 90°C to 110°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Fiberlogy pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Natural |
| Printing temperature | From 255°C to 270°C |
| Table temperature | From 90°C to 110°C |
| Material | Nylon PA12+GF15 |
| Reel diameter | 200 mm |
| Reel width | 80 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.5 kg |
Charts of the properties of the Nylon PA12+GF15 filament.
Useful links |
