ELECTRONICS - Strona 153
Loading...
Raspberry microSD 32 GB memory card
The 32 GB microSD memory card is a practical solution for users of Raspberry Pi minicomputers and other devices that support microSD cards. The A2 performance class...
Index: RPI-25873
Index: RPI-25873
Raspberry Pi microSD 64 GB Class A2 memory card
The 64 GB microSD memory card is a practical solution for users of Raspberry Pi minicomputers and other devices that support microSD cards. Class A2 provides high...
Index: RPI-25874
Index: RPI-25874
Tact Switch 12x12mm with cap - red mushroom - 5pcs
Button size 12x12 mm , cap height: 5.7 mm, cap diameter: 12 mm, cap color: red. Price for 5 pcs .
Index: SWT-03663
Index: SWT-03663
Ceramic condenser 100nF / 50V THT - 10 pcs.
Through hole ceramic capacitor of 100 NF / 50 V. The price for 10 pieces.
Index: PAS-00210
Index: PAS-00210
Female socket 2x10, 2,54mm raster
Female, double row goldpin socket, 2.54mm pitch .
Index: KAB-05871
Index: KAB-05871
- Discontinued product
Spring bolt with a rounded head designed for connecting and testing the modules with the pins on the goldpin straps without the need of soldering.
Index: MOD-05729
Index: MOD-05729
Raspberry Pi SSD NVMe drive - 256GB
The 256GB NVMe SSD from Raspberry Pi offers exceptional performance thanks to the use of PCI Express 2.0 technology. Combined with the 1-lane PCIe interface, users can count...
Index: RPI-25483
Index: RPI-25483
Raspberry Pi microSD 128 GB Class A2 memory card
The 128 GB microSD memory card is a practical solution for users of Raspberry Pi minicomputers and other devices that support microSD cards. Class A2 provides high...
Index: RPI-25875
Index: RPI-25875
Self-adhesive round feet 11mm - 4pcs
Self-adhesive round feet - props for electronic modules, with an 11 mm diameter. Price for 4 PCs.
Index: ETN-01337
Index: ETN-01337
- Discontinued product
Slide switch SS12T44 2-position - 5pcs.
Slide switch, straight to print with dimensions 12.1 x 8.7 x 5.5 mm . Lead spacing 3.00 mm.
Index: UCC-08051
Index: UCC-08051
- Discontinued product
Electrolytic capacitor 100uF/16V 6x7mm 105C THT - 10pcs.
Electrolytic capacitor with 100 uF / 16 V capacity and 2.54 mm grid. Size: Ø 6 x 7 mm. Price for 10 pieces.
Index: AKS-16925
Index: AKS-16925
- Discontinued product
Seeed Xiao ESP32-S3 Sense - set with OV2640 camera - WiFi/Bluetooth - Seeedstudio 113991115
This Seeedstudio kit consists of two modules – the Seeed Xiao ESP32-S3 and the OV3660 camera. The Seeed Xiao module is equipped with an ESP32-S3 chip with a dual-core Xtensa...
Index: SEE-22926
Index: SEE-22926
Lanberg Ethernet Patchcord UTP 6 0,25m - grey
Patchcord with a length of 0.25 m in grey color. Cable - twisted pair in category 6 Ethernet with RJ45 connectors installed. It has a cover that protects it from breaking.
Index: IMP-14353
Index: IMP-14353
Module PCF8574 - GPIO expander board for microcontroller - Waveshare 3708
The module allows you to increase the number of GPIOs (up to 8 more) of a microcontroller (e.g. Arduino module). Communicates on the I2C bus (TWI).
Index: WSR-04455
Index: WSR-04455
- Discontinued product
Jack 3,5mm stereo female jack - JY039-5P
Jack female 3.5 mm stereo socket. It has pins for the through-hole soldering (THT) on the PCB.
Index: KAB-02734
Index: KAB-02734
Slide switch SS22T25 2-position - 5pcs
Slide switch, straight, to print with the size of 9 x 3.5 x 3.5 mm. Pins pitch: 2.5 mm. Items are sold in sets of 5 pieces.
Index: UCC-05272
Index: UCC-05272
- Discontinued product
- SPECIAL OFFERS
Phototransistor TEPT4400 3mm 570nm
Phototransistor in the case of 3 mm. Maximum sensitivity for the wave with the length of 570 nm. The reading angle is 60 °. T ransparent lens.
Index: UCC-03866
Index: UCC-03866
Infrared receiver module 1838 - 38kHz - Iduino ST1089
Module with IR receiver, operating at a frequency of 38 kHz. The module is powered with the voltage from 2.7 V to 5.5 V. It detects an angle of up to 90 °. Maximum detection...
Index: GRL-12508
Index: GRL-12508
Infrared receiver TSOP31236 - 36kHz
TSOP31236 infrared receiver, operating at 36 kHz with a voltage from 2.7 V to 5.5 V.
Index: SES-04931
Index: SES-04931
- Discontinued product
Heatsink 40x30x5mm for Raspberry Pi 4 with thermoconductive tape - silver
Silver-coloured aluminium heat sink, 40 x 30 x 5 mm. It is a mounting element, compatible with the Raspberry Pi 4 minicomputer, as well as with other electronic circuits. It...
Index: ODS-15694
Index: ODS-15694
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C
The module is compatible with Arduino, equipped with a digital light sensor with a resolution of 16-bit, it is powered with the voltage in the range from 3.3 V to 5.5 V. It...
Index: DFR-09528
Index: DFR-09528
Fan for Nvidia Jetson Nano - 40x40x10mm 5V - 3 wires with reverse protection - Waveshare 16990
Small size fan 40 x 40 x 10 mm with 5V supply voltage. It is compatible with Nvidia Jetson Nano minicomputer. It can also be used as a cooling element in Raspberry Pi or...
Index: WSR-19460
Index: WSR-19460
Lanberg USB Cable Type A-C 2.0 black Quick Charge 3.0 - 3m
The USB 2.0 Type A - C cable, black, supports Quick Charge 3.0 technology to charge your smartphone's battery faster. It will allow you to transfer images and sound and will be...
Index: IMP-14820
Index: IMP-14820
D-SUB 9 female socket is used, for example, for the communication via the RS232 protocol.
Index: KAB-02453
Index: KAB-02453
- Discontinued product