- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 82
Loading...
MQ-135 alcohol, benzine, ammonia sensor - semiconductor
Module with sensor MQ-135 detecting benzene, alcohol and smoke . It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: MOD-08243
Index: MOD-08243
Tinycontrol-111 - LAN controller LK3.9 HW - digital I/O / 1-wire / I2C
A device that acts as a WWW server. It allows for reading sensors and remote control of 6 outputs. This version has many improvements over the V2 version, e.g. signal...
Index: TNC-08287
Index: TNC-08287
DFRobot Gravity - analog signal isolator
The module prevents the operation interference of the sensors through the insulation of the analog signal and providing an isolated power for sensors. It is supplied with the...
Index: DFR-09529
Index: DFR-09529
Power supply S-36-12 - for LED strips - 12V / 3A / 36W
Stable, switched-mode industrial power supply for powering LED strips. Voltage: from 100 V to 240 V. Output voltage: 12 VDC. Output current: 3 A. Equipped with a terminal...
Index: ZAS-09645
Index: ZAS-09645
WiFi antenna 3dB SMA male - 52mm
Wi-fi 3 dB antenna with the SMA male connector operating at the 2.4 GHz frequency. The antenna length is 52 mm and a diameter is 10 mm.
Index: AKS-10146
Index: AKS-10146
SanDisk Ultra Fit - memeory USB 3.1 Pendrive 64GB
USB 3.0 Ultra Flair memory from SanDisk with capacity of 64 GB. It is equipped with a small case. The device has a 5 years warranty.
Index: BAL-10584
Index: BAL-10584
LCD resistive touch screen TFT 4 480x320px SPI for Arduino - Waveshare 13587
Waveshare, resistive 4" touch screen for Arduino with 480 x 320 px resolution . There is also microSD card slot on the board. Works with Arduino and Nucleo via SPI interface....
Index: WSR-10757
Index: WSR-10757
ON-OFF switch monostable - PBW-16BPD - 2A 250V - flat green point
Monostable flat switch with the green point backlight. Contact load is 2 A for 250 V.
Index: AKS-10817
Index: AKS-10817
DFRobot Gravity - line tracking sensor - reflective, digital
Digital sensor of tracking the line, reflective for Arduino, it can detect the white and black lines. Separate signals provides a stable output signal TTL, so it looks for more...
Index: DFR-11273
Index: DFR-11273
DFRobot Gravity - digital pressure sensor 1kg (10N)
Pressure sensor for Arduino works in the range of up to 1 kg. It is based on HX711, it has 24-bit analog-to-digital converter designed to scale weight and control applications...
Index: DFR-11280
Index: DFR-11280
DFRobot Gravity - water vapor sensor
The vapor sensor is compatible with Arduino. When the humidity increases, output voltage increases. It can be used in projects such as a rain detector or touch sensor based on...
Index: DFR-11285
Index: DFR-11285
Grove - mini limit sensor with roller
Module from the Grove series equipped with a limit switch with lever ended with roller. Working voltage is 3.3 V and 5 V. T he kit includes a cable adapted to Seeedstudio Base...
Index: SEE-11335
Index: SEE-11335
Grove - vibration sensor with piezoelectric membrane
Vibration sensor with flexible plastic piezoelectric sensor LDT0-028. It is supplied with 5V, works with modules from Arduino, Raspberry Pi and other...
Index: SEE-11342
Index: SEE-11342
Grove - BME280 - humidity, temperature and pressure sensor 110kPa I2C 3-5V
The Grove module is equipped with a humidity, temperature and pressure sensor powered with the voltage of 3.3 V to 5 V with I2C and SPI interface. Measuring range: temperature:...
Index: SEE-11355
Index: SEE-11355
SPDT E3JK-R4M1 90-250VAC photoelectric sensor IP65 NC / NO - 4m
Photoelectric transmitting sensor. It detects the objects by the method of reflection. Detection range is up to 4 meters. It has Light-ON operation mode. It is powered with the...
Index: AKS-11835
Index: AKS-11835
Connecting cables Female-male 20cm black - 100pcs
Set of 100 copper connecting wires 26AWG with the length of 20 cm in black color.
Index: DNG-11904
Index: DNG-11904
DFRobot Matrix LED RGB 32x16 - 512 diodes
The matrix consists of 512 RGB LEDs arranged in 32 rows and 16 columns. For operation of the module, you must use 13 pins of the microcontroller. The matrix can be connected in...
Index: DFR-12264
Index: DFR-12264
Cytron LSA08 - strip with reflection sensors and display
Compact strap with eight reflective sensors. It has the function of automatic calibration, LCD display of 2x8, digital and analog outputs, UART, powered with a voltage of 12 V.
Index: CTN-12398
Index: CTN-12398
- Sale
OTG Host USB cable - microUSB - white - 12cm
Adapter microUSB - USB OTG slot. It is dedicated for tablets, smartphones, etc. that support USB OTG host mode. It lets you connect the devices equipped with a standard USB plug.
Index: DNG-12490
Index: DNG-12490
Power supply for LED Akyga 11-15V / 8.3A / 100W
100 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 11 V to 15 V. The voltage...
Index: RCO-12861
Index: RCO-12861
DFRobot Gravity - digital barometer, pressure and altitude sensor 1250hPa I2C/SPI 3,3-5,5V
Module with digital barometer from Bosch BMP388. The measurement range is from 300 hPa to 1250 hPa relative accuracy of 8 Pa on approx. 0.5 m of altitude. The system is...
Index: DFR-13156
Index: DFR-13156
Power cord extension cord IEC 1.8 m VDE - black
Extension of the power cable with the IEC 320 C13 and IEC 320 C14 plugs with the 1.8 m length, used mostly in PC and server computers and power supplies for laptops and other...
Index: IMP-13207
Index: IMP-13207
Radio transmitter Feather 32u4 RFM95 LoRa Radio - 868MHz - Adafruit 3078
Radio transmitter/receiver operating in the LoRa standard powered with the rechargeable li-pol battery or via USB, it is running at frequencies of 868/915 MHz. Range, when...
Index: ADA-13280
Index: ADA-13280
OdSeven Camera Module Sony IMX219 8MPx 77,6 degree - for Raspberry Pi
Camera module with sensor IMX219 with a resolution of 8 MPx and angle of 77,6°. The module has no PCB. It works with the official camera v2 for the Raspberry Pi.
Index: ODS-13465
Index: ODS-13465