- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
SENSORS - Strona 25
Loading...
Gravity - analog AC current sensor - up to 10A - DFRobot SEN0288
An analog sensor from DFRobot that measures the AC current flowing in a wire without cutting it. The measurement range is up to 10 A , and the measurement itself is done...
Index: DFR-19898
Index: DFR-19898
Grove - BMP280 - Pressure and temperature sensor I2C/SPI
Pressure and temperature sensor, model BMP280, Grove. Used to measure atmospheric pressure and ambient temperature. It is compatible with Arduino. It has a small size, consumes...
Index: SEE-14986
Index: SEE-14986
Dust / air quality sensor PM1.0 / PM2.5 / PM10 - 5V UART - PlanTower PMSA003-C
Laser dust sensor for determining the degree of purity of the air . Manufactured by PlanTower, it enables precise analysis of pollution in the environment. PMSA003-C...
Index: PLA-19587
Index: PLA-19587
Digital Light Sensor - VEML7700 - I2C - Angular - STEMMA QT/Qwiic - Adafruit 5378
Digital ambient light sensor from Adafruit. It was based on the VEML7700 system, which allows it to measure in the range from 0 lux to 120 klux . Unlike standard sensors,...
Index: ADA-21064
Index: ADA-21064
Line sensor :Move Line Follow - for line follower robots - Kitronik 56111
The :Move Line Follow line sensor is a proposal from the Kitronik company, which allows you to extend the functionality of the robot with the ability to drive along the line...
Index: KTR-22486
Index: KTR-22486
Non-contact voltage detector with flashlight Rebel RB-02
The device allows non-contact detection of alternating voltage from 90 V to 1000 V . Voltage detection is indicated by a change in the frequency of sound generated by the...
Index: LEC-18378
Index: LEC-18378
Grove - smoke and flammable gases - MQ2 - analog - semiconductor
Module with gas sensor MQ2 capable of detecting smoke and leakage of gaseous fuels such as LPG, methane, hydrogen, butane etc. The module works with 5 V and communicates...
Index: SEE-15175
Index: SEE-15175
Set of magnetic encoders for micro motors - Side-Entry connector - 2,7-18V - 2pcs - Pololu 4761
Magnetic encoders with quadrature output for Polol micro series motors. Sensors with Hall effect and magnetic disk allow 12 pulses per revolution. The sensors are equipped...
Index: PLL-17156
Index: PLL-17156
Gravity - IO Shield - extension for FireBeetle M0 and ESP32-E - DFRobot DFR0762
The extension provides a convenient connection between DFRobot Gravity sensors and FireBeetle 2.0 series. It offers the most commonly used ports , including digital,...
Index: DFR-20375
Index: DFR-20375
Grove - GPS module (Air530) with antenna - Seeedstudio 109020022
Grove - GPS (Air530) is a satellite navigation and positioning module with an external antenna with a U.FL connector, supporting multiple location systems such as GPS,...
Index: SEE-24127
Index: SEE-24127
Gravity: Conductivity Sensor Switch - DFRobot
The module that is able to determine whether the object has an electric conductivity. The maximum detection value is 10 MΩ. After electric conductivity detection, the module...
Index: DFR-08111
Index: DFR-08111
Voltmeter KWS-AC300 with split-core current transfer - 50-30V/100A
The KWS-AC300 is a closed-core AC transformer that allows you to measure current parameters. A small LCD display shows data indicating voltage and current, temperature,...
Index: DNG-17859
Index: DNG-17859
- Sale
- SPECIAL OFFERS
Environmental sensor - hat for Raspberry Pi - Waveshare 20471
An environmental sensor in the form of an overlay for Raspberry Pi equipped with a number of useful sensors. It has built-in temperature , humidity , air pressure, ambient...
Index: WSR-20550
Index: WSR-20550
Enviro pHAT - temperature, pressure, light intensity and proximity sensor - overlay for Raspberry Pi
Enviro pHAT is an overlay for Raspberry Pi with BME280 and LTR-559 sensors allowing to measure temperature, pressure, light level and proximity sensor. Additionally, the...
Index: PIM-16966
Index: PIM-16966
Measuring by-pass to measure a maximum current of 50 A. The measuring voltage at 50 A is 75 mV. The operating temperature of the resistor is between -20°C and 60°C....
Index: AKS-17216
Index: AKS-17216
LSM6DS3TR-C + LIS3MDL 9DOF IMU - accelerometer, gyroscope and magnetometer I2C - Adafruit 5543
The sensor is based on the ST LSM6DS3TR-C system, a popular 6-DoF IMU accelerometer with a gyroscope. It allows you to measure acceleration (3-axis accelerometer) and spatial...
Index: ADA-21824
Index: ADA-21824
Magnetic Encoder Disc for 20D mm Metal Gearmotors, OD 9.7 mm, ID 2.0 mm, 20 CPR (Bulk) - Pololu 3498
Five magnetic disks that are used with quadrature encoders designed for installation in 20D mm motors from Pololu. They help achieve up to 20 impulses per revolution. Outer...
Index: PLL-08257
Index: PLL-08257
Grove - temperature and humidity sensor SHT31 I2C
The module is equipped with SHT31 temperature and humidity sensor. On the board there is a Grove connector for easy connection of the module to the Base Shield cover. It...
Index: SEE-15329
Index: SEE-15329
Light actived switch - Kitronik 2112
A set for building an intensity-activated transistor switch, the switch is based on Darlington's circuit and a phototransistor responsible for measuring light intensity ....
Index: KTR-16124
Index: KTR-16124
BleBox TwilightSwitch - twilight LED switch 12-24V / 4A
Mini twilight switch used with LED strips. Works with voltage from 12V to 24V and electric current up to 4A. It turns the light on at dusk and off when it gets bright. No...
Index: BOX-08902
Index: BOX-08902
ADXL343 QT 3-axis I2C / SPI digital accelerator - module - Adafruit 4097
Sensor for measuring acceleration in three axes in the range of +-2g/4g/8g/16g. The module is supplied with the voltage from 2 V to 3.6 V, the voltage regulator is...
Index: ADA-13948
Index: ADA-13948
DFRobot barcode and QR reader GM65 - DFR0660
The CM65 module is designed for accurate reading barcodes or QR codes . It works at high speed (about 1 s) in low-light areas. It uses an intelligent image...
Index: DFR-17551
Index: DFR-17551
Fermion - analog gas sensor NO, NO2, H2 - MEMS MiCS-2714 - DFRobot SEN0441
An analog sensor for NO, NO2 and H2 gases manufactured by DFRobot. The MiCS-2714 MEMS sensor module can measure hydrogen and nitrogen oxide concentrations. It detects...
Index: DFR-20679
Index: DFR-20679
Hit sensor + wire - Iduino SE024
Hit sensor, the signal of which, after a collision with some object, goes into high status. It has a status LED that informs about changing the status of voltage. It works with...
Index: OST-14254
Index: OST-14254