Description: Adafruit Trinket - Mini Microcontroller module - 5V
Miniature module with an AVR Attiny85 microcontroller and is equipped with 8 KB of Flash memory, 5 digital pins, analog input and 2 PWM channels. On board is miniUSB connector, through which the system can be programmed via the Arduino IDE using the cable. After only a few minor changes, the board behaves like a standard Arduino.
The presentation of the Adafruit Trinket board's possibilities.
Choose the right board
In our offer, you will find two versions of the Adafruit Trinket - 3.3 V and 5.0 V. Both modules work in the same way, differing only in the operating voltage of the logic leads and maximum clock frequency. The 3.3 V version runs at a frequency of 8 MHz, 5.0 V and works with 8 MHz and 16 MHz.
|
Check how to program the Adafruit Trinket using the Arduino IDE or AVRdude! |
The collaboration with Arduino
The device can be programmed via the Arduino environment, however, due to the small size of the board, there are some differences:
- Trinket has no serial port and the serial monitor embedded in the environment of Arduino, will not work.
- Computers equipped with USB 3.0 ports can have a problem with the recognition of the Trinket bootloader, the solution to this situation is to use an external USB 2.0 hub.
- The board is working with Windows and Mac OS, at the moment, there are no drivers for Linux.
Specification
- The AVR Attiny85 microcontroller:
- Flash memory: 8 KB (2.75 kb of which is occupied by the bootloader)
- SRAM: 512 b
- EEPROM: 512 bytes
- Clock Frequency: internal 8 MHz with the possibility to set 16 MHz for 5 V version
- USB bootloader with the possibility of programming via AVRdude or via Arduino IDE
- MicroUSB connector for programming, in our assortment you will find the necessary wire
- Installed voltage regulators of 5.0 V and 3.3 V with current delivery up to 150 mA, allow to connect the supply voltage up to 16 V.
- Power supply from USB port or external power source with automatic switching system
- On the board are two LEDs: green for power, and red for the user, connected to pin 1.
- 5 digital pins of I/o, including:
- 2, together with the USB interface
- 1 analog input
- 2 PWM channels
- I2C and SPI interface
- Works with most basic libraries of the Arduino including Adafruit Neopixel.
- Four mounting holes with diameter of 2.1 mm
- Dimensions: 31 x 15.5 x 5 mm
- Weight: 1.85 g
Examples of projects
- Kaleidoscope Eyes - glowing sunglasses
- Controller of servo
- Tap Tempo Trinket - pulse counter
- The controller controlled by the IR
- LED display
- Volume regulator
- Music player
Useful links |
