- Reduced price
- Sale
List of products by brand Akso - Strona 18
Loading...
3-pin female socket housing 2,5mm - 5pcs.
3-pin female socket housing - 2.50 mm raster. In the set there are 5 pieces.
Index: KAB-06311
Index: KAB-06311
Rotary switch 12-position / 1 circuit - 37mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 37 mm.
Index: UCC-06148
Index: UCC-06148
Small metal motor powered from 3 V - 6 V. Idle current 94 mA. Dimensions: 8 x 15 mm . Speed approx. 17000 rpm.
Index: MOT-01647
Index: MOT-01647
D-SUB 9 male plug for the cable is used, for example, for communication via the RS232 protocol.
Index: KAB-02456
Index: KAB-02456
Crocodile connector 51mm without insulation - 5pcs.
Small red crocodile connector with the length of approx. 51mm without the insulation. Price is for 5 pieces.
Index: KAB-05685
Index: KAB-05685
Female-female 4 pin - 20cm - 5 pcs.
4-pin multicolor cable, length about 20 cm. Terminated on both sides with female connector - raster 2.54 mm. Price for 5 pieces.
Index: KAB-02713
Index: KAB-02713
Microphone 50-56dB 9/4,5mm - THT - 10 pcs.
Height h: 4.5 mm. Diameter Ø: 9 mm. Sensitivity: 50-56 dB. Pins for soldering to the printed circuit board.
Index: UCC-00740
Index: UCC-00740
2-pin straight connector for soldering to PCB. Used for example to connect male wires. Raster is equal to 2.54 mm. Socket is sold in pack of 10 pieces.
Index: UCC-08501
Index: UCC-08501
Motor regulator DC 12-40V/10A/400W - with a speed control knob
A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.
Index: MOD-06666
Index: MOD-06666
Shears designed for precise cutting of single or double-sided laminates up to 1.6 mm thick and universal tiles. With 45 mm long serrated blade. The shears have a safety...
Index: NSZ-09792
Index: NSZ-09792
Tact Switch Buttons Kit - 140pcs
Set of 140 Tact Switch buttons . There are 14 different versions in the set.
Index: SWT-09781
Index: SWT-09781
Radiator RAD07 15x14,5x6mm - 5 psc.
Heat sink with the size of 15 x 14.5 x 6 mm. Compatible with the Raspberry Pi minicomputer.
Index: ETN-01497
Index: ETN-01497
Plastic brush with antistatic properties. It is safe to use it to clean electronics. Brush length is approx. 15 cm, and the bristles length is 4 cm
Index: NSZ-04771
Index: NSZ-04771
Bistabile switch ON-OFF PB-12A-213WD, round 30V/1A
Bistable switch with a round attachment with a loading capacity of 1A contacts for 30 V.
Index: AKS-10235
Index: AKS-10235
The sensor is used to detect precipitation. It is powered with the voltage of 5 V. It has digital and analog output, making it compatible with most of the commissioning...
Index: MOD-01732
Index: MOD-01732
Diode Schottky SB560 5A / 60V - 10pcs
Schottky diodes with a maximum current of 5 A, 60 V back voltage.
Index: AKS-14591
Index: AKS-14591
Electrolytic capacitor 22uF/50V 5x11mm 105C THT - 10pcs.
Through hole electrolytic capacitor of 22 uF / 50 V. Pins' pitch: 2 mm. Size: Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-00212
Index: PAS-00212
Slide switch MSS-2336 3-position - straight - 5 pcs
Slide switch, straight printable with dimensions of 13 x 3.6 x 3.5 mm. Leads raster 2,00 mm. Product sold by the package of 5 pieces.
Index: UCC-04838
Index: UCC-04838
Relay NT73-2A-S12-05 - 5V coil, 12A/125VAC contacts
Coil voltage: 5 V, contacts: 12 A / 125 V AC. Dimensions: 18,8 x 15,2 mm, height: 15 mm.
Index: PAS-04868
Index: PAS-04868
Strain gauge sensor presure force of 50kg
The pressure sensor reduces its resistance when the force put to the square tip, increases. The sensor in the form of a rectangle with the side of 34 mm. For the operation...
Index: MOD-09446
Index: MOD-09446
Magnetic sensor - reed contact CMD1263 + screws
Wired proximity sensor activated magnetically. Case dimensions - 12 x 63 mm.
Index: AKS-10151
Index: AKS-10151
Low-Power LM393P dual-channel comparator - THT DIP8 - 5pcs
Comparator LM393 with supply voltage from 2 V to 36 V. The response time is 300 ns. 5 units are included.
Index: UCC-06265
Index: UCC-06265
6-pin (2 x 3) straight plug for printing (pitch: 2.54 mm). Price is for 5 pieces.
Index: KAB-01485
Index: KAB-01485