List of products by brand Akso - Strona 22
AL2437 banana socket - black - 4mm - 5pcs
Banana slot in black color with the length of 33 mm with the hole diameter of 4 mm. Set of 5 pcs slots.DC socket 5,5/2,1mm with 1 m wire
DC φ5.5 x 2.1 mm slot (for AC adapter) with 2-vein cable with the length of 1 m with the removed insulation at the end.ON-OFF switch monostable - PBW-12B - 2A 250V
Projecting monostable switch with contact rating of 2 A for 250 V.Eight-segment display x1 - 14mm red - common anode
Single 8-segment display of digits with points and some characters.Breadboard - 400 holes transparent
Breadboard is used for creating and testing electronic circuits without soldering. Version with 400 cells, the size of 82.5 x 53 mm, with a transparent body. Stripes denoting...Limit switch mini with lever - WK621 - 5 pcs.
Limit switch with curved lever with the length of 18 mm. The maximum operating parameters: voltage of 250 V and current of 5 A. 5 pcs.M3 PH Screws Length: 30mm with Washers - 10pcs.
M3 screw with the length of 30 mm and simple springy washer. Kit of 10 pieces.Electrolytic capacitor 4700uF/25V 16x25mm 105C THT - 5pcs.
Electrolytic capacitor with a capacity of 4700 uF / 25 V and a 7.5 mm lead grid. Size: Ø 16 x 25 mm. Price for 5 pieces.Transistor N-MOSFET IRLZ44N - THT - 5pcs
Vds: 55 V. Id: 47 A. Rdson: 0,022 Ohms. Case: TO-220. Items are sold in sets of 5 pieces.Tact Switch 12x12mm / 4mm THT 4pin - black - 5 pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 4 mm. The button is in black color. 5 pcs.Tact Switch 12x12, 11mm THT 4pin - black - 5pcs
A small monostable button mounted in a through-hole way - THT with four pins with the size: 12x12 mm, height: 11 mm. The button is in black color. 5 pcs.SMA female connector for simple printing - 50Ω
Simple SMA female connector with an impedance of 50 Ω mounted on a PCB. Used to connect antennas and receivers.Magnetic sensor to open door/window - reed contact CMD20
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 20 x 64 mm.Goldpin distancing plug 1x40 2,54mm raster
Male goldpin, double, extended 1x40 strap, pitch of 2.54 mm.Bracket with magnifying glass and insulated grippers - third hand ZD10H
Convenient bracket with a 3 diopters magnifying glass, place for a tip cloth and insulated grippers.Limit switch with straight lever - WK315 - 5 pcs.
Limit switch with a simple lever with a length of 13 mm. Maximum working voltage is 125 V and current is 1 A. 5 pcs.Antimagnetic straight tweezers Vetus ESD13 - 120mm
Anti-magnetic tweezers made of stainless steel. Symbol: HRC40 Vetus ESD-13 Length: 120 mmLinear voltage regulator 9V L7809CV - THT TO220
Stabilizer used to supply logic systems supplied with 9 V. The maximum output current is 1 A.DC 2,1/5,5mm plug with alligator clips
The power cable on the one side ended with power plug DC 2.1 / 5.5 mm, on the other, with the popular crocodile. It p rovides power connection from any source to the...Female-male ribbon cable 4 pin - 20cm - 5 pcs.
4-pin multicolor cable with the length of about 20 cm. Ended on one side with female connector, on the other with male. The cables can be used to connect systems with the...Monostabile switch PB07C 7x7mm - 5pcs
The monostable switch PB07C has dimensions of 7 x 7 mm. It has 6 leads that can be soldered into the PCB. The voltage of the switch is 30 V. The monostable button is an...
