- New
Set of 25mm bits with magnetic holder Felo 02013116 - 30pcs
Index: LUK-24690
- Reduced price
- Promotion
- Reduced price
- Promotion
List of products by brand Akso - Strona 23
Loading...
Electrolytic capacitor Low ESR 10uF/50V 5x11mm 105C THT - 10pcs
The ectrolytic through hole capacitor of low impedance (LOW ESR) 10 uF / 50 V. Pins' pitch: 2 mm. Size Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-01224
Index: PAS-01224
Wooden brush with antistatic properties. It is safe to use it to clean electronics. Brush length is 14.5 cm and the bristles length is 3 cm
Index: AKS-12096
Index: AKS-12096
DC 2,1/5,5mm cable 30cm with switch
Cable terminated with a 2.1/5.5 mm plug and socket with a built-in switch. It allows you to disconnect the power supply without removing the power supply from the mains...
Index: KAB-03913
Index: KAB-03913
2,54 mm - socket housing 5-pin - 5pcs.
The 5-pin socket's case for the cable, the pitch is 2.54 mm. The kit includes 5 x 5-pin cases.
Index: KAB-06781
Index: KAB-06781
Diode Schottky BAT85 PHI 0,2A / 30V 4NS - 10pcs
Schottky diodes with a maximum current of 200 mA, 30 V backward voltage.
Index: AKS-14582
Index: AKS-14582
Limit switch with lever - WK611 - 5pcs.
Limit switch with lever with the length of 25 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.
Index: AKS-10824
Index: AKS-10824
Breadboard is used for creating and testing electronic circuits without the need fo soldering. The version with 270 fields, size 82.5 x 45 mm.
Index: PLY-00057
Index: PLY-00057
Set of 2 wires in black and red with a length of 25 cm, ended with connector with hook.
Index: KAB-01553
Index: KAB-01553
Index: UCC-00094
Female socket 1x10 raster 2,54mm for Arduino - 5pcs
10-pin female connector strip is used in the Arduino Uno and Leonardo. Raster: 2.54 mm. Price for 5 pcs of connectors.
Index: UCC-01991
Index: UCC-01991
2-pin male connector housing 2,5mm - 5pcs.
2-pin male connector housing - 2.50 mm raster. In the set there are 5 pieces.
Index: KAB-06305
Index: KAB-06305
Anti-magnetic curved tweezers TS-15 - 110mm
Anti-magnetic tweezers made of stainless steel. It has acid resistant properties. Symbol: TS-15, length: 110 mm.
Index: NSZ-08775
Index: NSZ-08775
Printed circuit board service kit
A set of tools for cleaning and repairing printed circuit boards.
Index: NSZ-00631
Index: NSZ-00631
Sponge for cleaning soldering tips - round - 5pcs.
Round sponge for cleaning the soldering iron tip with a diameter of about 50 mm.
Index: LUT-00638
Index: LUT-00638
325 mW audio amplifier in DIP8 enclosure. It has one channel, operates with voltage from 4 V to 12 V. Includes 5 pieces of circuits.
Index: UCC-06099
Index: UCC-06099
High temperatura probe PT100 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 250 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07469
Index: SES-07469
Linear voltage regulator LDO 3,3V LM1117MP - SMD SOT223 - 5pcs
Low-Dropout linear stabilizer. Output voltage: 3,3V. Maximum output current: 0.8A. Housing: SOT223 . Includes 5 stabilizers.
Index: UCC-01118
Index: UCC-01118
Choke 330uH/180mA - vertical mounting - 5pcs.
Inductance: 330 μH. Maximum current: 180 mA. Dimensions: 6 x 8 mm. Price for 5 pieces.
Index: PAS-04360
Index: PAS-04360
Tact Switch 6x6mm/7mm THT - 5pcs
A small monostable button with a threaded mounting - THT in size: 6x6 mm, height: 7 mm. Price for 5 pieces.
Index: SWT-05408
Index: SWT-05408
Switch ON-OFF momentary, round 250V/3A - green - 5 pcs.
Switch with a round attachment with the contact's loading capacity of 3 A for 250 V. 5 pcs.
Index: UCC-05269
Index: UCC-05269
ON-OFF switch monostable - PBW-12B - 2A 250V flat
The monostable flat switch with the load capacity of the contacts: 2 A for 250 V.
Index: NSZ-09793
Index: NSZ-09793
Rectifier diode P600M 6A/1000V - 10pcs.
Rectifier diode, maximum operating voltage 1000 V, current up to 6 A . Price for 10 pieces.
Index: PAS-06022
Index: PAS-06022
Solar cell 1,2W/9V 115x115x3mm
A 1.2 W solar cell with an output voltage of 9 V. The dimensions of the plate are: 115 x 115 x 3 mm. The outputs are pads for self soldering of cables.
Index: AKU-03502
Index: AKU-03502