List of products by brand Akso - Strona 24
M2,5 PH Screws Length 10mm with Washers - 10pcs.
Set contains 10 pieces of cross screws with M2,5 thread, 10 mm long, and 10 washers.Set of 15cm red cables - 100pcs
Set of 100 15 cm long wires with the insulation removed at the ends. The ends are tinned to maintain rigidity and facilitate soldering.Diode Schottky 1N5819 1A / 40V - 10 pieces
Schottky diode, maximum working voltage of 40 V, current up to 1 A. The set includes 10 pieces.Socket 1x2pin - 2,54mm - long - 10pcs
2-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm. It features long pins with a length of 10.5 mm....Linear voltage regulator 12V L7812CV - THT TO220 - 5pcs
Linear regulator 12 V, 1,5 A. Housing: TO-220. price per 5 pieces.Slide switch SS22T25 2-position - 5pcs
Slide switch, straight, to print with the size of 9 x 3.5 x 3.5 mm. Pins pitch: 2.5 mm. Items are sold in sets of 5 pieces.LM741C (UA741C) - Operational Amplifier - 5pcs
Single operational amplifier in DIP case. Set of 5 pcs.Eight-segment display x4 - 14mm red - common anode
Quadruple 8-segment display of four digits along with points and some letters.Helping hand - Holder with magnifying glass and LED backlight - ZD-126-2
Easy and convenient holder with magnifying glass x3.5 diopters, clips, spring for the soldering iron, spot for tip cleaner and LED backlight.Switch ON-OFF momentary, round 250V/3A - red
Switch with a round attachment with the contact's loading capacity of 3 A for 250 V. Items are sold in sets of 10 pieces.Magnetic sensor - reed contact CMD1423 + screws
Wireless proximity sensor activated magnetically. Case dimensions - 14 x 23 mm.Slide switch SS12T44 2-position - 5pcs.
Slide switch, straight to print with dimensions 12.1 x 8.7 x 5.5 mm . Lead spacing 3.00 mm.Linaer voltage regulator LDO 3,3V LF33CV - THT TO220 - 5pcs
The LDO LF33CV stabilizer is used to supply circuits operating at 3.3 V. Maximum output current is 0.5 A. Price for 5 pcs.Cables, measuring probes for multimeters - PM7
Cables on one end have angular banana connectors with shielded tips with a diameter of 4 mm, on the other end there are measuring probes with a length of 145 mm. Length of the...Electrolytic capacitor 220uF/25V 8x12mm 105C THT - 10pcs
220 uF/ 25V through-hole electrolytic capacitor. Leads raster: 3.5 mm. Size: Ø8x12 mm. Price for 10 pieces.Antimagnetic tweezer curved Vetus ESD 15 - 116mm
Stainless steel antimagnetic tweezers. Symbol: HRC40 Vetus ESD15. Length: 116 mm.Connectors 2,54 mm - socket housing 3-pin - 5pcs.
The 3-pin socket's case on the cable, the pitch is 2.54 mm. The kit includes 5 x 3-pin cases.Socket 1x4pin - 2,54mm - 10pcs.
4-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm.
