List of products by brand Akso - Strona 7
Limit switch with roller - WK7121
Limit switch with 7 cm long lever ended with a roller. It operates with 250 V and the maximum load is 5 A. The limit switch is used to detect the set position of the moving...Raychem RUEF500 polymer fuse 30V/5A 10.2mm raster - 10pcs
Polymer fuse operating with the voltage of up to 30 V, which allows for the flow of the current of up to 5.0 A. The price is for 10 pieces.Speaker YD40 0.25W 50Ohm - 40x16mm
Speaker power 0.25 W, impedance of 50 Ohms, and dimensions of 40 x 16 mm.Plug DC 5,5/2,5mm with terminal connector - 5pcs
DC φ5.5 x 2.5 mm plug (for power supply unit) with a detachable connector that allows you to mount the cable with a screwdriver. Items are sold in sets of 5 pieces.Round rubber grommet 8mm - 10pcs.
Rubber cable gland with the thread of 8 mm. Prevents the cable passing through the body wall from rubbing. Designed for wire diameters from 7 mm to 9 mm.2.5/8mm insulated end ferrule - 10pcs
Sleeve end for multiwire copper cables. Maximum vein's cross-section is 2.5 mm2, sleeve length is 8 mm. Price is for 10 pieces.Cable, adapter 3x1 JST, 2mm raster - BLS 2.54mm raster - 5pcs.
Cable, adapter with plug, pitch of 2 mm and the female connector 3x1, 2.54 mm pitch. It is compatible with analog Sharp distance sensors. The cable length is min. 30 cm.WTA 5x20mm fuse - 250V/0.1A - 10pcs
Fuse type 5 x 20 mm operating up to 250 V, allowing up to 0.1 A current flow. Price per 10 pieces.On-Off switch KCD5 250V / 6A - black
Switch, type On-Off. The load capacity of the contacts is 250 V / 15 A.Solid state relay SSR-40A 480VAC / 40A - 32VDC
Single-phase solid -state relay SSR with a voltage of 480 V AC and 32 V DC. The rated current is 40 A.Stepper Motor JK57HS56-2504 200 steps 3,25V/2,5A/1,1Nm
Bipolar stepper motor , four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). Powered by 3.25 V, draws 2500 mA per coil. Torque is 11.2 kg*cm (1.1 Nm)....Electric cube self-locking 3 pin 2mm 10A/380V
The 3-pin self-locking electrical cube allows for the connection of cables with a voltage of 380 V with a current flow of up to 10 A . The connection grid is 10 mm, the...Soldering fume absorber AKS-153A on a jib
The device removes fumes generating during soldering. It has two replaceable carbon filters. The absorption efficiency reaches 1 m3/min. Absorber is powered by mains voltage...
