- New
- Reduced price
- Sale
- Sale
- Sale
USB type A to USB type C converter with DIP switch - Adafruit 5972
Index: ADA-25265
- Reduced price
- Sale
List of products by brand Akso - Strona 8
Loading...
Thermal fuse 250V/2A 135C - 10pcs
The thermal fuse for the temperature of 135°C working with the voltage of 250 V and current of up to 2 A. The price is for 10 pieces.
Index: KAB-05481
Index: KAB-05481
Infrared receiver TSOP4836 - 36kHz - 5 pcs.
IR receiver TSOP4836, it is operating at a frequency of 36 kHz with a voltage from 4.5 V to 5.5 V.
Index: SES-03430
Index: SES-03430
L298N - two-channel motor driver
Two-channel H-bridge. Supply voltage: max. 46 V. Max. instantaneous current 2 A. Housing: Multiwatt15 (THT).
Index: UCC-00060
Index: UCC-00060
Magnetic sensor to open door / window - reed contact CMD932
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 9.0 x 32 mm.
Index: SES-03128
Index: SES-03128
The fan with the input voltage of 12 V, current consumption of 130 mA and dimensions of 50 x 50 x 15 mm.
Index: MOT-03872
Index: MOT-03872
Solenoid Valve Mini - 12V 0,04MPa
The device supports control of fluid flow using a computer or microcontroller. The valve is powered by a voltage of 12 V, maximum pressure is 0.04 MPa (0.4 bar).
Index: MOD-09456
Index: MOD-09456
Plastic brush with antistatic properties. It is safe to use it to clean electronics. The overall length is 8.8 cm, and the part with bristles has dimensions of 6.7...
Index: NSZ-04775
Index: NSZ-04775
IDC 6 pin socket for tape - 5pcs
IDC 6-pin slot clamped on the tape (pitch: 2.54 mm). Price for 5 pieces.
Index: KAB-01486
Index: KAB-01486
ZP2 industrial connector with quick connector - 5-pin
Industrial connector ZP2 with a connector allowing for quick attachment of a five-plane cable. The connector is made of metal in silver.
Index: KAB-05827
Index: KAB-05827
Electrolytic capacitor Low ESR 470uF/25V 8x12mm 105C THT - 10pcs
Low-impedance electrolytic chronic-impedance capacitor (LOW ESR) 470 uF/ 25V. Outputs shelf: 3.5 mm. Size Ø8 x 12 mm. Price for 10 pieces.
Index: PAS-00902
Index: PAS-00902
Rotary switch 3-positions 2 circuits - 30mm
Rotary switch, 3-state for the case, equipped with 10 contacts. The total height is 29.5 mm.
Index: UCC-06164
Index: UCC-06164
Limit switch mini curved - WK622 - 5 pcs.
Limit switch with lever with the length of 19 mm. Maximum working parameters are the AC voltage of 250 V and current of 3 A.
Index: AKS-11238
Index: AKS-11238
ON-OFF bistable switch - PBW-16APP - 2A 250V - flat green / red
Flat bistable button with red/green illumination. Contact load is up to 2 A for 250 V.
Index: AKS-10810
Index: AKS-10810
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - green
A salient, monostable switch with the green backlight. Contact load is 2 A for 250 V.
Index: AKS-10807
Index: AKS-10807
Rotary switch 6-position 2 circuits - 37mm
Six-state rotary switch for housing equipped with 14 contacts. Total height is 37 mm.
Index: UCC-06149
Index: UCC-06149
Electric cube 3pin 32A/400V - PCT-213 - orange - 5pcs.
The 3-pin electric cube allows you to connect the wires with a voltage of 400 V with the flow of current up to 32 A in a simple way, without the need of using the tools.
Index: KAB-06901
Index: KAB-06901
Heat sink with the size of 40 x 40 x 11 mm. It is c ompatible with stepper motors from the series NEMA17.
Index: ETN-06668
Index: ETN-06668
Bistable switch ON-OFF PB-12A, round 30V/1A - black - 5pcs.
Bistable switch with a round attachment with a loading capacity of 1A contacts for 30 V or 3 A for 125 V.
Index: AKS-10233
Index: AKS-10233
Soldering fume absorber AKS-153 23W
The device removes the fumes produced during soldering. It has two replaceable carbon filters. Absorption capacity reaches 1 m3/min. The absorber is powered by 230 V mains...
Index: LUT-05844
Index: LUT-05844
Double-sided foam tape 5mm x 3m
Double-sided tape made of 0,8 mm thick foam. It adheres well to even or slightly rough surfaces such as plastic, metal, ceramics, glass. The width of the roll is 5 mm.
Index: MOD-05551
Index: MOD-05551
Vetus ESD10 - 122mm straight antimagnetic tweezers
Anti-magnetic tweezers made of stainless steel. Symbol: HRC40 Vetus ESD-10 Length: 122 mm.
Index: NSZ-04820
Index: NSZ-04820
Stepper Motor JK28HS32-0674 200 steps 3,8V/0,67A/0,06Nm
Bipolar stepper motor , four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 3.6 V, draws 670 mA per coil. Torque is 0.6 kg*cm (0.06 Nm)....
Index: MOT-03604
Index: MOT-03604
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-03661
Index: MOD-03661
The holding electromagnet powered with the voltage of 6 V with a power of 2.5 W. It holds a weight of 2 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 20 mm,...
Index: MOD-03096
Index: MOD-03096