List of products by brand OEM - Strona 22
Mounting bracket for distance sensor HC-SR04 - blue
Bracket for installation the distance sensor HC-SR04. It is made of blue acrylic with 3 mm of thickness, it has three holes for mounting.Triac BTA140-800 800V/25A - THT
Vdrm voltage: 800 V. It current: 25 A. Gate current Ig: 25 mA. Housing: TO220.Tact Switch 10x10mm with cap - square white - 5pcs
Size: 12 x 12 mm, square cap: 10 x 10 mm, cap colour: white . Price for 5 pieces.BLS connector - 6x1 socket - 5pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 6x1.Tact Switch 12x12mm with cap - square green - 5pcs
Button size 12 x 12 mm, nozzle height: 5.7 mm, nozzle diameter: 12 mm, color of the nozzle: green. Price is for 5 pieces.Hi-Link Power Supply HLK-PM03 100V-240VAC / 3.3VDC - 1A
The HLK-PM03 power supply from Hi-Link converts mains voltage (AC) from 100 V to 240 V into 3.3 V direct current (DC) with a current capacity of 1 A. It is ideal for powering...Module NE555 - regulated frequency generator
The module works as a timer, pulse generator or oscillator application. It can be used as a time delay. Works with voltages from 5 V to 12 V. Board size: 30 x 13 mm.Battery holder for 3 packs AAA (R3)
Basket for three AAA batteries (small fingers).Liquid flow sensor ZJ-S201 30l/m - thread 1/2''
A liquid flow sensor operating in the range of 1 to 30 liters per minute. It is powered by a voltage of 3.5 V to 24 V, and the output signal is a frequency proportional to the...Cell holder for 3x 18650 battery without wires
Plastic basket for three 18650 type batteries, without wires. Cell assembly and disassembly is easy thanks to the use of spring-loaded plates. It allows for easy drawing of...BLS connector - socket 8x1 - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 8x1 sockets.Electrolytic capacitor Low ESR 10uF/50V 5x11mm 105C THT - 10pcs
The ectrolytic through hole capacitor of low impedance (LOW ESR) 10 uF / 50 V. Pins' pitch: 2 mm. Size Ø5 x 11 mm. Price is for 10 pieces.USB extension cable A - A with On/Off switch black - 0.5 m
The USB A - A 2.0 cable is black , 0.5 m long and serves as an extension cable for powering devices and data transmission between them. It has a USB A plug on one side and a...Set of copper tips for soldering stations - Copper series 900M - 10pcs
Set of copper soldering tips for soldering station series Copper, work with stations: 936, 937, 803, 738, 995da+, etc.Tact Switch 12x12, 7mm THT 6pin - green backlight - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is with the backlight in the green color.WiFi module ESP-12S ESP8266 Black - 9 GPIO, ADC, PCB antenna
Wi-fi module based on the ESP8266 chip. It works in standard wi-fi 802.11 b/g/n at 2.4 GHz. It is equipped with 16 pins - pitch of 2 mm, 9 of which is GPIO, 1 ADC and UART....Tact Switch 10x10mm with cap - square red- 5pcs
Size: 12 x 12 mm, square nozzle: 10 x 10 mm, color of the nozzle: red. Price is for 5 pieces.Speaker MG15 0.1W 8Ohm - 15x4mm
A speaker with a power of 0.1 W, 8 Ω, dimensions 15 x 4 mm.Power supply POS-50-5-C2 - 5V/10A/50W
Mounting power supply with 50 W . Input voltage from 100 V to 240 V AC . Output voltage is 5 V . Output current up to 10 A .
