List of products by brand OEM - Strona 23
Molex 51005 2-pin cable 2mm male
2-pin male connector, type Molex 51005 with the cable with the length of 15 cm. Pitch is equal to 2 mm.BLS connector - 2x2 socket - 5 pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 2x2.RGB LED WS2811 8mm addressing - 10pcs
LED RGB 5 mm WS2811 with integrated control unit allows you to control the device via the 1-wire bus.Plug DC 5,5/2,1mm with cable 1,5m - 24AWG
2-vein cable, 1 m long with straight plug DC 5,5 / 2,1 mm.Membrane keypad - 1 blue key - self-adhesive
The keyboard with one key in blue has been equipped with a self-adhesive tape which allows to place the keyboard on any surface and in any place. The connectors of the...DIP switch 3-pole - red - 5pcs.
Slide switch, board with three levers. Leads Raster: 2.54 mm Housing height: 5.5 mm13.56MHz RFID/NFC Keychain Fob - 10pcs
The RFID/NFC identifier in the form of a keychain. Each chip has a unique 32-bit code. The device works at a small distance from the reader, the carrier frequency is 13.56 MHz...Inductive proximity sensor LJ12A3-4-Z / BY 4mm 6-36V
Inductive, digital proximity sensor with a 100 cm long cable and nuts for easy installation. Detects metal at a distance of up to 4 mm . The detection of an object is...Module with microUSB socket - soldered connectors
The module with a socket enables connection of the plug microUSB to any arrangement. The exit raster 2,54 mm is compatible with standard contact plates and connection...Mounting bracket for distance sensor HC-SR04 - blue
Bracket for installation the distance sensor HC-SR04. It is made of blue acrylic with 3 mm of thickness, it has three holes for mounting.Tact Switch 10x10mm with cap - square white - 5pcs
Size: 12 x 12 mm, square cap: 10 x 10 mm, cap colour: white . Price for 5 pieces.Connecting cables - female socket - crocodile - 10 pieces
Set of 10 wires. On the one side, there is a standard female socket (for goldpin), on the other end there is the crocodile connector.Module NE555 - regulated frequency generator
The module works as a timer, pulse generator or oscillator application. It can be used as a time delay. Works with voltages from 5 V to 12 V. Board size: 30 x 13 mm.Tact Switch 12x12mm with cap - square green - 5pcs
Button size 12 x 12 mm, nozzle height: 5.7 mm, nozzle diameter: 12 mm, color of the nozzle: green. Price is for 5 pieces.Cell holder for 3x 18650 battery without wires
Plastic basket for three 18650 type batteries, without wires. Cell assembly and disassembly is easy thanks to the use of spring-loaded plates. It allows for easy drawing of...Hi-Link Power Supply HLK-PM03 100V-240VAC / 3.3VDC - 1A
The HLK-PM03 power supply from Hi-Link converts mains voltage (AC) from 100 V to 240 V into 3.3 V direct current (DC) with a current capacity of 1 A. It is ideal for powering...Liquid flow sensor ZJ-S201 30l/m - thread 1/2''
A liquid flow sensor operating in the range of 1 to 30 liters per minute. It is powered by a voltage of 3.5 V to 24 V, and the output signal is a frequency proportional to the...BLS connector - socket 8x1 - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 8x1 sockets.Power supply wire with JST - BEC plug
Double silicone cable ended with a plug of type "BEC", is used to connect power from the rechargeable batteries and batteries.BLS connector - 6x1 socket - 5pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 6x1.Battery holder for 3 packs AAA (R3)
Basket for three AAA batteries (small fingers).Electrolytic capacitor Low ESR 10uF/50V 5x11mm 105C THT - 10pcs
The ectrolytic through hole capacitor of low impedance (LOW ESR) 10 uF / 50 V. Pins' pitch: 2 mm. Size Ø5 x 11 mm. Price is for 10 pieces.
