- New
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
CAN Bus Module - MCP2515 - SPI - hat for Feather - Adafruit 5709
Index: ADA-22888
- Reduced price
- Sale
List of products by brand OEM - Strona 34
Loading...
Index: AKC-01536
LM35DZ temperature sensor - analog THT
Analog thermometer, in which the output voltage is proportional to the measured temperature from the range of: 0°C to 100°C. It is powered with the voltage from 4 V to 30 V.
Index: SES-00376
Index: SES-00376
LED RGB 5mm common anode - 5 pcs
LED RGB 5 mm with common anode. Lens transparent. The product is packed in 5 pieces.
Index: LED-00543
Index: LED-00543
Tact Switch 6x6mm/4,3mm DIP - 5 pcs.
A small monostable button mounted in a through-hole way - THT with the size: 6x6 mm, height: 4.3 mm. The price is for 5 pieces.
Index: SWT-00377
Index: SWT-00377
Adapter plug DC 5,5/2,1mm - plug connector 6F22 battery 9V
Adapter that allows you to connect a popular 9 V 6F22 battery for DC 5.5/2.1 mm connectors used in development sets, for example, Arduino.
Index: AKC-01369
Index: AKC-01369
DIP switch 2-pole - red - 5 pcs.
Table slide switch with two levers. Pins pitch: 2.54 mm, height: 5.5 mm. 5 pcs.
Index: SWT-00366
Index: SWT-00366
Temperature and humidity sensor DHT11 + 50C
Popular temperature and humidity sensor with a digital, single wired interface. Measurement range: temperature 0°C to +50 °C, humidity 20% to 90% RH .
Index: UCC-09301
Index: UCC-09301
Female pin for case raster 2.54mm 10pcs
A set of ten female pins in a case with the pitch of 2.54 mm.
Index: KAB-04903
Index: KAB-04903
Set of heat sinks for Raspberry Pi - silver with heat transfer tape - 3pcs.
Set of 3 pieces of silver heat sinks, which are 9 x 9 mm, 14 x 9 mm, 14 x 14 mm. At the back there is a double-sided, thermally conductive tape. They are compatible with...
Index: DNG-15212
Index: DNG-15212
Set of heat sinks for Raspberry Pi - black with heat transfer tape - 3pcs.
Set of black heat sinks in 3 pieces. They have different sizes, at the back there is a double-sided, thermally conductive tape. They are compatible with Raspberry Pi 4...
Index: DNG-15211
Index: DNG-15211
Photoresistor 5-10kΩ GL5616 - 10pcs
Photoresistor GL5616 with the resistance of 5 to 10 kΩ, 100 mW of power and a size of 5x2 mm.
Index: SES-01564
Index: SES-01564
Set of tips for soldering stations - 900M series - 10 pcs.
A set of soldering tips for soldering station from series Black T, works i.a. with stations: 936, 937, 803, 738, 995da+, etc.
Index: LUT-09601
Index: LUT-09601
Solder wick for removing tin excess. Width 2 mm, length 1.5 m.
Index: NSZ-00172
Index: NSZ-00172
Mounting potentiometer 10kΩ - 5pcs
Mounting potentiometer, horizontal RM-065 in through-hole housing with 10 kΩ resistance. Price for 5 pieces.
Index: PAS-00307
Index: PAS-00307
Set of 140 wires for breadboards
A kit of 140 wires of different length, to connect the fields on the breadboards (test).
Index: KAB-00678
Index: KAB-00678
Solder wick for removing tin excess. Width 2.5 mm, length 1.5 m.
Index: NSZ-02432
Index: NSZ-02432
L293D - two-channel 36V / 0,6A motor driver - 5pcs
Two-channel motor controller. Supply voltage up to 36 V. Average current per channel 600 mA (momentary up to 1.2 A). Housing: DIP 16 (through-hole). Set contains 5 pcs of chips.
Index: UCC-00176
Index: UCC-00176
Rotary potentiometer 10kΩ linear 1/8W
10 kΩ linear rotary potentiometer with the power of 1/8 W. Pitch of the pin is 5 mm which allows you to attach the device to the breadboard.
Index: PAS-02168
Index: PAS-02168
Bipolar transistor NPN BC547B 50V/0,1A - 5pcs
Bipolar transistor NPN, 50 V, 100 mA. Pinout: CBE. Price for 5 pieces.
Index: UCC-00254
Index: UCC-00254
Tact Switch 6x6mm / 5mm THT - 2pin - 5pcs.
A small monostable button mounted in a through-hole way - THT with two pins with the size: 6x6 mm, height: 5 mm. The price is for 5 pieces.
Index: SWT-03495
Index: SWT-03495
Universal double sided board 30x70mm
The board allows you to implement any electronic circuit. The holes have a raster of 2.54 mm, overall dimensions: 30 x 70 mm.
Index: PLY-02715
Index: PLY-02715
Supply module for contact plates MB102 - 3,3V 5V
Power module for breadboard, it allows for connection of power supply of 5 V or 3.3 V using the AC adapter. It has LED indicating the power connection.
Index: MOD-01482
Index: MOD-01482
Universal double sided board 40x60mm
The board allows you to implement any electronic circuit. The holes have a raster of 2.54 mm, overall dimensions: 40 x 60 mm.
Index: PLY-02744
Index: PLY-02744