- New
- New
- Reduced price
- Sale
- Sale
- Sale
- Sale
- Sale
Linear Actuator Super Power Jack 2000N 7,5mm/s 12V - 30cm stroke
Index: MOT-05364
- Reduced price
- Sale
List of products by brand OEM - Strona 38
Loading...
Bracket for PIR SR501Px motion detector
Transparent bracket for the popular PIR motion detector with mounting holes. Made of acrylic .
Index: GRL-10385
Index: GRL-10385
ON-OFF switch monostable - flat - blue - 12V
Flat monostable switch with the blue backlight .
Index: DNG-10942
Index: DNG-10942
Water level sensor - 10W float reed switch - 92mm
The sensor allows you to control the water level in the tank. It consists of a float which under the influence of increasing the fluid volume, rises, causing a short circuit of...
Index: DNG-11432
Index: DNG-11432
Inductive proximity sensor LJ6A3-1-Z / BX 1mm 6-36V
Inductive digital proximity sensor with 200 cm cable and nuts for easy installation. Detects metal up to a distance of 1 mm . Detection of an object is indicated by a low...
Index: DNG-11857
Index: DNG-11857
- Sale
Inductive proximity sensor LJ30A3-10-Z / BY 10mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 15 mm. The object detection is...
Index: DNG-11875
Index: DNG-11875
Inductive proximity sensor LJ30A3-15-Z / BY 15mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 15 mm. The object detection is...
Index: DNG-11874
Index: DNG-11874
Basket for three type D (R20) batteries. The item has two wires with the insulation removed in black and red.
Index: DNG-12468
Index: DNG-12468
Round aluminum servo horn - 20mm / 6mm
Aluminum servo horn with a diameter of 20 mm and the mounting hole 6 mm. It is circular in shape. Works with standard servos. The set also includes mounting screws.
Index: GRL-12538
Index: GRL-12538
Goldpin 2x20 straight raster 2.54mm
Male goldpin strip with 2 x 20 pins. Raster is 2.54 mm in length and 2.54 mm in width - between the two strips. It works with Raspberry Pi Zero among others.
Index: DNG-12659
Index: DNG-12659
Index: LED-00457
Mini Tamiya connector - set (plug socket)
Power connector, type mini Tamiya - kit includes slot and plug.
Index: KAB-01075
Index: KAB-01075
Ethernet network module ENC28J60 mini
A module that enables the connection of the microcontrollers and development kits , including the Arduino, with the Ethernet network via the SPI interface. The system in...
Index: MOD-01512
Index: MOD-01512
Temperature sensor DS18B20+ module - blue
Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 3.0 V to 5.5 V
Index: MOD-01506
Index: MOD-01506
Index: LED-01456
The keyboard has numbers from 0 to 9 and the signs: * and #. The buttons are connected into a matrix so for the detection of 12 buttons, you need only 7 pins of the...
Index: SPF-02202
Index: SPF-02202
Module with button, type tact switch, size of 17 x 10mm with two holes with a diameter of 2.3 mm.
Index: MOD-02645
Index: MOD-02645
Optical Limit Sensor Endstop Reprap 3D Ramps 1.4
Optical, slit end sensor dedicated to RapRap 3D printers. The module has three outputs and connects to the Ramps 1.4 controller via the included cable.
Index: MOD-02659
Index: MOD-02659
Stepper motor driver A4988 RepRap - red
Stepper motor controller based on A4988. Powered from 8 - 35 V, with a maximum current consumption of 1 A per coil. Maximum resolution: 1/16 steps.
Index: MOD-02660
Index: MOD-02660
Magnetometer GY-271 3-axis digital I2C 3,3V / 5V - QMC5883L
Sensor to measure the magnetic field in three axes in the range of ±8 gauss with a resolution of 5 miles gaus. It works with the voltage from 3.3 V to 5.0 V. It is...
Index: MOD-02722
Index: MOD-02722
Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions...
Index: MOD-02901
Index: MOD-02901
Extension GPIO Raspberry Pi 3/2/B+ to the contact plate + tape
The module allows connection of the GPIO leads of the minicomputer Raspberry Pi 3, 2 and B + to popular breadboards with 830 and 400 holes, using an attached to the set,...
Index: RPI-02892
Index: RPI-02892
Passive buzzer module without generator - black
Module with buzzer without a generator, allows you to generate audio signals with a signal voltage of a certain frequency. Board in black.
Index: MOD-02963
Index: MOD-02963
Stepper motor driver A4988 RepRap - green
Stepper motor driver based on the A4988 system. Voltage supply in the range from 8V to 35 V, with maximum current consumption of 1 A per coil. Maximum resolution: 1/16 of a...
Index: MOD-02964
Index: MOD-02964
Temperature and humidity sensor DHT11 - blue module
Module with temperature and humidity sensor with a digital interface. Measuring range: temperature 0-50 °C, humidity of 20-90 %RH. It has connectors for connecting the sensor...
Index: MOD-03030
Index: MOD-03030